Thanks so much! Just tried it out and it worked! On Wednesday, August 19, 2020 at 9:15:45 PM UTC-4, Luke Marcum wrote: > > Its fine! > > On Wednesday, August 19, 2020 at 7:35:56 PM UTC-4, gjr80 wrote: >> >> Have published the WeeWX-WD >> <https://github.com/gjr80/weewx-weewx-wd/tree/master> v2.0.0 release >> just now. Download and installation should work as per the readme. My >> apologies for the delay. >> >> Gary >> >> On Tuesday, 18 August 2020 22:41:09 UTC+10, gjr80 wrote: >>> >>> Rich, thanks, indeed I did not publish a 2.0.0 release package and hence >>> the 404 error. >>> >>> Luke. As Rich points out you can download a zip of the repo and that >>> will install, my concern is whether there are any outstanding issues with >>> 2.0.0. From memory I had them all sorted and then other things took me away >>> from publishing the release. Give me day to have a look over 2.0.0 and >>> publish the release. >>> >>> Gary >>> >>> On Tuesday, 18 August 2020 21:22:09 UTC+10, rich T wrote: >>>> >>>> Gary >>>> >>>> Believe this is the issue that Luke is having: >>>> >>>> pi@raspberrypi:~ $ wget -P /var/tmp >>>> https://github.com/gjr80/weewx-weewx-wd/releases/download/v2.0.0/weewxwd-2.0.0.tar.gz >>>> --2020-08-18 07:17:01-- >>>> https://github.com/gjr80/weewx-weewx-wd/releases/download/v2.0.0/weewxwd-2.0.0.tar.gz >>>> Resolving github.com (github.com)... 140.82.112.4 >>>> Connecting to github.com (github.com)|140.82.112.4|:443... connected. >>>> HTTP request sent, awaiting response... 404 Not Found >>>> 2020-08-18 07:17:02 ERROR 404: Not Found. >>>> >>>> Now if you go to https://github.com/gjr80/weewx-weewx-wd, cloning or >>>> downloading the zip file seems to work. >>>> >>>> Rich >>>> >>>> On Sunday, August 16, 2020 at 6:26:16 PM UTC-4, Luke Marcum wrote: >>>>> >>>>> Im trying to set up weewx to obtain data from my gw1000, running on my >>>>> pi4. Im using these instructions to set it up: >>>>> https://github.com/weewx/weewx/wiki/gw1000-recipe and I've made it to >>>>> the part where I have to update the interceptor settings in weewx.conf >>>>> but >>>>> I can't seem to find where this part of the settings is. I have been >>>>> able >>>>> to run interceptor.py from the interceptor download and it gets my >>>>> current >>>>> weather data, but I can't seem to connect it to weewx. HELP!!! >>>>> >>>>
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/7e8bd353-c761-4142-ac5c-84fee8393656o%40googlegroups.com.
