OK, let’s start with the obvious. Is HP1000.py in /home/weewx/bin/user and if you view the contents of the file is it legible code?
Gary On Thursday, 3 September 2020 at 07:08:58 UTC+10 icoj...@gmail.com wrote: > this is what i'm seeing > > pi@raspitest:/var/tmp $ sudo /home/weewx/bin/wee_extension > --install=/var/tmp/HP1000-master/HP1000.tar.gz > Request to install '/var/tmp/HP1000-master/HP1000.tar.gz' > Extracting from tar archive /var/tmp/HP1000-master/HP1000.tar.gz > Saving installer file to /home/weewx/bin/user/installer/HP1000 > Finished installing extension '/var/tmp/HP1000-master/HP1000.tar.gz' > pi@raspitest:/var/tmp $ /home/weewx/bin/wee_config --list-drivers > > Module name Driver name Version Status > weewx.drivers.acurite AcuRite 0.4 > weewx.drivers.cc3000 CC3000 0.40 > weewx.drivers.fousb FineOffsetUSB 1.20 > weewx.drivers.simulator Simulator 3.2 > weewx.drivers.te923 TE923 0.41 > weewx.drivers.ultimeter Ultimeter 0.41 > weewx.drivers.vantage Vantage 3.2.1 > weewx.drivers.wmr100 WMR100 3.5.0 > weewx.drivers.wmr200 WMR200 3.5.0 > weewx.drivers.wmr300 WMR300 0.33 > weewx.drivers.wmr9x8 WMR9x8 3.4.1 > weewx.drivers.ws1 WS1 0.41 > weewx.drivers.ws23xx WS23xx 0.41 > weewx.drivers.ws28xx WS28xx 0.51 > On Wednesday, 2 September 2020 at 21:59:38 UTC+1 icoj...@gmail.com wrote: > >> Apologies for resurrecting an old thread but I'm trying to do a fresh >> install using the commands listed above, using Weewx 4.1.1 and the HP1000 >> driver is not appearing in the list so it cannot be chosen. Has anything >> fundamental changes between the previous and current weewx versions? >> >> Thanks >> >> On Tuesday, 15 October 2019 at 19:50:53 UTC+1 icoj...@gmail.com wrote: >> >>> Finally, it's working. >>> >>> Thanks all for your help. >>> >>> >>> On Tuesday, 15 October 2019 12:51:24 UTC+1, Matt wrote: >>> >>>> Hi All, >>>> >>>> First post. >>>> >>>> I got Weewx set up on a brand new Raspberry Pi 3 model B yesterday. I >>>> saw that it was posting data but last night most of the data was incorrect >>>> (e.g. outside temp 0 degrees C when it was actually 10 degrees). I >>>> decided >>>> to leave it and went to bed. Today I am seeing better values but all >>>> readings appear to be summing/appending to the previous reading. For >>>> example, the temperature has risen from 0 to around 21 degrees very >>>> uniformly. The actual temperature is around 13 degrees. >>>> >>>> I have an Aercus station, identical to Fine Offset HP1000. I have set >>>> Weewx driver to both 'simulator' and 'Fine Offset' with no change in data. >>>> >>>> I read somewhere about an HP1000 driver written by aussie susan but >>>> editing the daemon file was beyond my capabilities so I couldn't proceed >>>> with it. >>>> >>>> My station can be seen at: >>>> https://www.pwsweather.com/obs/ILITTLEW9.html# >>>> >>>> I appreciate that I will need to provide logs etc, but I am work at the >>>> moment and will upload logs later. I just wanted to get the post up to >>>> see >>>> if anyone had experienced anything similar or has any advice for a newbie. >>>> >>>> I love the functionality of weewx and look forward to using it. >>>> >>>> Many thanks in advance. >>>> >>>> Matt >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/fd8a48c2-849f-43da-9898-421d495f8235n%40googlegroups.com.