Hi Bob, Just thought you might like to know your ws6in1 driver works just as well for the Bresser PC 5 in 1 station (Model No. 7002571). It uses the same console as the PC 6 in 1 station but a simpler sensor rig (no UV). I've had it running successfully on Lubuntu 18.04 and now on a Raspberry Pi 4b. Regards, Paul On Sunday, 8 November 2020 at 14:26:19 UTC pete...@gmail.com wrote:
> Thanks Bob, that worked. > > On Wednesday, 4 November 2020 at 18:38:30 UTC Bob Atchley wrote: > >> Hi Peter, >> >> I recently reinstalled weewx and the WS6in1 driver on a RaspberryPi 4 >> (previously on a rPi 2) and hit the same problem >> I solved it by installing the crcmod library via the apt command: >> >> $ sudo apt install python3-crcmod >> >> Not sure why the pip3 command didn't provide the needed files, this >> wasn't needed originally. >> >> I am in the process of updating the readme.txt to add this and focus on >> python3 installation. >> As the driver seems stable I'm also going to up it to version 1.0 (but no >> code changes from 0.9 other than changing the version number) >> >> Hope this helps >> >> Bob >> >> On Wednesday, 4 November 2020 at 11:07:38 UTC pete...@gmail.com wrote: >> >>> Hi Bob, >>> >>> Really appreciate your help building this driver. >>> >>> I have the Bresser 7002570 and have just reinstalled my Pi but have run >>> into an issue. >>> >>> I followed the instruction using Python 3 and pip3, so "pip3 install >>> crcmod" >>> >>> After I enter "sudo wee_config --reconfigure" I complete the station >>> information then see the station options as follows: >>> >>> Installed drivers include: >>> 0) ? (user.ws6in1) No module named 'crcmod' >>> >>> 1. AcuRite (weewx.drivers.acurite) >>> >>> .... >>> >>> After selecting 0 and entering the station information I receive the >>> following: >>> >>> Traceback (most recent call last): >>> >>> File "/usr/share/weewx/wee_config", line 123, in >>> main() >>> File "/usr/share/weewx/wee_config", line 117, in main >>> config_mgr.run(args, options) >>> File "/usr/share/weewx/weecfg/config.py", line 114, in run >>> stn_info = self.get_stn_info(config_dict, options) >>> File "/usr/share/weewx/weecfg/config.py", line 155, in get_stn_info >>> stn_info.update(weecfg.prompt_for_driver_settings(driver, config_dict)) >>> File "/usr/share/weewx/weecfg/*init*.py", line 1685, in >>> prompt_for_driver_settings >>> *import*(driver) >>> File "/usr/share/weewx/user/ws6in1.py", line 369, in >>> import crcmod >>> ModuleNotFoundError: No module named 'crcmod' >>> >>> Any help gratefully received. >>> >>> Peter. >>> >>> On Thursday, 24 September 2020 at 07:45:31 UTC+1 Bob Atchley wrote: >>> >>>> Hi Stéphane >>>> >>>> The following are identical: >>>> Youshiko YC9388 >>>> Bresser PC 6 in 1 >>>> Garni 935PC >>>> Ventus W835 >>>> >>>> I think the Bresser model is the Bresser 7002570 - it should >>>> specifically mention the PC data connection. The WiFi version is not >>>> compatible as the USB connection provides power only (no data). >>>> >>>> Hope this helps >>>> >>>> Bob >>>> >>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/f97323b1-e875-4576-8cca-99d60e29db83n%40googlegroups.com.