Hmm, I’m still not convinced that the log is as it should be, log_failure under [StdReport] is definitely = True? When reports are generated there should be entries about skin.conf being found etc. Nonetheless, Seasons seems to be generating the correct number of files. Can you check the timestamp on /var/www/html/weewx/index.html, is it changing? Is it current or stuck on 1 January?
Gary On Tuesday, 5 January 2021 at 02:10:09 UTC+10 blu...@gmail.com wrote: > Done. Nothing new in log. > > Jan 4 07:59:09 corbett weewx[32526] INFO __main__: Initializing weewx > version 4.2.0 > Jan 4 07:59:09 corbett weewx[32526] INFO __main__: Using Python 2.7.13 > (default, Aug 22 2020, 10:03:02) #012[GCC 6.3.0 20170516] > Jan 4 07:59:09 corbett weewx[32526] INFO __main__: Platform > Linux-4.19.66-v7+-armv7l-with-debian-9.13 > Jan 4 07:59:09 corbett weewx[32526] INFO __main__: Locale is 'en_US.UTF-8' > Jan 4 07:59:09 corbett weewx[32526] INFO __main__: PID file is > /var/run/weewx.pid > Jan 4 07:59:09 corbett weewx[32531] INFO __main__: Using configuration > file /etc/weewx/weewx.conf > Jan 4 07:59:09 corbett weewx[32531] INFO __main__: Debug is 1 > Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: Loading station > type Vantage (weewx.drivers.vantage) > Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: StdConvert target > unit is 0x1 > Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: Archive will use > data binding wx_binding > Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: Record generation > will be attempted in 'software' > Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: Using archive > interval of 300 seconds (software record generation) > Jan 4 07:59:09 corbett weewxd: forecast: MainThread: Zambretti: forecast > version 3.3.2 > Jan 4 07:59:09 corbett weewxd: forecast: MainThread: Zambretti: > interval=600 max_age=604800 winddir_period=1800 pressure_period=10800 > hemisphere=NORTH lower_pressure=950.0 upper_pressure=1050.0 > Jan 4 07:59:09 corbett weewxd: forecast: MainThread: NWS: forecast > version 3.3.2 > Jan 4 07:59:09 corbett weewxd: forecast: MainThread: NWS: interval=10800 > max_age=604800 lid=ORZ006 foid=PQR > Jan 4 07:59:09 corbett weewxd: forecast: MainThread: WU: forecast version > 3.3.2 > Jan 4 07:59:09 corbett weewxd: forecast: MainThread: OWM: forecast > version 3.3.2 > Jan 4 07:59:09 corbett weewxd: forecast: MainThread: UKMO: forecast > version 3.3.2 > Jan 4 07:59:09 corbett weewxd: forecast: MainThread: Aeris: forecast > version 3.3.2 > Jan 4 07:59:09 corbett weewxd: forecast: MainThread: WWO: forecast > version 3.3.2 > Jan 4 07:59:09 corbett weewxd: forecast: MainThread: DS: forecast version > 3.3.2 > Jan 4 07:59:09 corbett weewxd: forecast: MainThread: XTide: forecast > version 3.3.2 > Jan 4 07:59:09 corbett weewx[32531] INFO weewx.restx: StationRegistry: > Station will be registered. > Jan 4 07:59:09 corbett weewx[32531] INFO weewx.restx: Wunderground: > Posting not enabled. > Jan 4 07:59:09 corbett weewx[32531] INFO weewx.restx: PWSweather: Posting > not enabled. > Jan 4 07:59:09 corbett weewx[32531] INFO weewx.restx: CWOP: Posting not > enabled. > Jan 4 07:59:09 corbett weewx[32531] INFO weewx.restx: WOW: Posting not > enabled. > Jan 4 07:59:09 corbett weewx[32531] INFO weewx.restx: AWEKAS: Posting not > enabled. > Jan 4 07:59:09 corbett weewx[32531] INFO user.mqtt: service version is > 0.23 > Jan 4 07:59:09 corbett weewx[32531] INFO user.mqtt: binding to archive > Jan 4 07:59:09 corbett weewx[32531] INFO user.mqtt: topic is > corbett/weather > Jan 4 07:59:09 corbett weewx[32531] INFO user.mqtt: data will be uploaded > to mqtt://127.0.0.1:1883 > Jan 4 07:59:09 corbett weewx[32531] INFO __main__: Starting up weewx > version 4.2.0 > Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: Clock error is > 1.12 seconds (positive is fast) > Jan 4 07:59:09 corbett weewx[32531] INFO weewx.engine: Using binding > 'wx_binding' to database 'weewx.sdb' > Jan 4 07:59:09 corbett weewx[32531] INFO weewx.manager: Starting backfill > of daily summaries > Jan 4 07:59:12 corbett weewx[32531] INFO weewx.engine: Starting main > packet loop. > Jan 4 08:00:15 corbett weewx[32531] INFO weewx.manager: Added record > 2021-01-04 08:00:00 PST (1609776000) to database 'weewx.sdb' > Jan 4 08:00:15 corbett weewx[32531] INFO weewx.manager: Added record > 2021-01-04 08:00:00 PST (1609776000) to daily summary in 'weewx.sdb' > Jan 4 08:00:15 corbett weewxd: forecast: NWSThread: NWS: downloading > forecast from ' > http://forecast.weather.gov/product.php?site=NWS&product=PFM&format=txt&issuedby=PQR > ' > Jan 4 08:00:15 corbett weewxd: forecast: ZambrettiThread: Zambretti: > generated 1 forecast record > Jan 4 08:00:15 corbett weewx[32531] INFO weewx.restx: MQTT: Published > record 2021-01-04 08:00:00 PST (1609776000) > Jan 4 08:00:16 corbett weewxd: forecast: NWSThread: NWS: got 38 forecast > records for Scappoose-Columbia OR 45.77N 122.86W Elev. 49 ft > Jan 4 08:00:16 corbett weewx[32531] INFO weewx.restx: StationRegistry: > Published record 2021-01-04 08:00:00 PST (1609776000) > Jan 4 08:00:21 corbett weewx[32531] INFO weewx.cheetahgenerator: > Generated 7 files for report SeasonsReport in 5.30 seconds > Jan 4 08:00:25 corbett weewx[32531] INFO weewx.imagegenerator: Generated > 28 images for report SeasonsReport in 4.86 seconds > Jan 4 08:00:26 corbett weewx[32531] INFO weewx.reportengine: Copied 87 > files to /var/www/html/weewx > Jan 4 08:00:26 corbett weewx[32531] INFO weewx.cheetahgenerator: > Generated 6 files for report SmartphoneReport in 0.35 seconds > Jan 4 08:00:28 corbett weewx[32531] INFO weewx.imagegenerator: Generated > 12 images for report SmartphoneReport in 1.72 seconds > Jan 4 08:00:28 corbett weewx[32531] INFO weewx.reportengine: Copied 6 > files to /var/www/html/weewx/smart/ > Jan 4 08:00:28 corbett weewx[32531] INFO weewx.cheetahgenerator: > Generated 1 files for report MobileReport in 0.11 seconds > Jan 4 08:00:28 corbett weewx[32531] INFO weewx.imagegenerator: Generated > 4 images for report MobileReport in 0.28 seconds > Jan 4 08:00:28 corbett weewx[32531] INFO weewx.reportengine: Copied 2 > files to /var/www/html/weewx/mobile/ > Jan 4 08:00:32 corbett weewx[32531] INFO weewx.cheetahgenerator: > Generated 14 files for report StandardReport in 3.97 seconds > Jan 4 08:00:36 corbett weewx[32531] INFO weewx.imagegenerator: Generated > 24 images for report StandardReport in 3.69 seconds > Jan 4 08:00:36 corbett weewx[32531] INFO weewx.reportengine: Copied 14 > files to /var/www/html/weewx/standard > Jan 4 08:05:15 corbett weewx[32531] INFO weewx.manager: Added record > 2021-01-04 08:05:00 PST (1609776300) to database 'weewx.sdb' > Jan 4 08:05:15 corbett weewx[32531] INFO weewx.manager: Added record > 2021-01-04 08:05:00 PST (1609776300) to daily summary in 'weewx.sdb' > Jan 4 08:05:15 corbett weewxd: forecast: NWSThread: NWS: downloading > forecast from ' > http://forecast.weather.gov/product.php?site=NWS&product=PFM&format=txt&issuedby=PQR > ' > Jan 4 08:05:15 corbett weewx[32531] INFO weewx.restx: MQTT: Published > record 2021-01-04 08:05:00 PST (1609776300) > Jan 4 08:05:15 corbett weewxd: forecast: NWSThread: NWS: got 38 forecast > records for Scappoose-Columbia OR 45.77N 122.86W Elev. 49 ft > Jan 4 08:05:17 corbett weewx[32531] INFO weewx.cheetahgenerator: > Generated 7 files for report SeasonsReport in 1.68 seconds > Jan 4 08:05:18 corbett weewx[32531] INFO weewx.imagegenerator: Generated > 14 images for report SeasonsReport in 1.06 seconds > Jan 4 08:05:18 corbett weewx[32531] INFO weewx.reportengine: Copied 0 > files to /var/www/html/weewx > Jan 4 08:05:18 corbett weewx[32531] INFO weewx.cheetahgenerator: > Generated 6 files for report SmartphoneReport in 0.11 seconds > Jan 4 08:05:19 corbett weewx[32531] INFO weewx.imagegenerator: Generated > 6 images for report SmartphoneReport in 0.41 seconds > Jan 4 08:05:19 corbett weewx[32531] INFO weewx.reportengine: Copied 0 > files to /var/www/html/weewx/smart/ > Jan 4 08:05:19 corbett weewx[32531] INFO weewx.cheetahgenerator: > Generated 1 files for report MobileReport in 0.04 seconds > Jan 4 08:05:19 corbett weewx[32531] INFO weewx.imagegenerator: Generated > 4 images for report MobileReport in 0.28 seconds > Jan 4 08:05:19 corbett weewx[32531] INFO weewx.reportengine: Copied 0 > files to /var/www/html/weewx/mobile/ > Jan 4 08:05:20 corbett weewx[32531] INFO weewx.cheetahgenerator: > Generated 14 files for report StandardReport in 1.40 seconds > Jan 4 08:05:21 corbett weewx[32531] INFO weewx.imagegenerator: Generated > 12 images for report StandardReport in 0.85 seconds > Jan 4 08:05:21 corbett weewx[32531] INFO weewx.reportengine: Copied 0 > files to /var/www/html/weewx/standard > > On Mon, Jan 4, 2021 at 3:16 AM gjr80 <gjrod...@gmail.com> wrote: > >> I suspect you have an error in the generation of your Seasons index.html >> file that is being masked by log_failure = False under [StdReport] in >> weewx.conf. Try changing this to log_failure = True, (leave debug = 1) >> restart WeeWX and see what appears in the log. >> >> Gary >> >> On Monday, 4 January 2021 at 15:49:10 UTC+10 blu...@gmail.com wrote: >> >>> Thanks for the help Gary. I was literally 2 hours away at the beach, >>> away from my Pi at the time that it's stuck at, so I know I didn't make any >>> changes intentionally. The only correlation I can come up close to the >>> 11:55pm time that it's stuck at is, each night @ 11:59pm via a cron job, I >>> stop weewx, back it up and then restart it. Based on /var/log/messages, it >>> was back up and running 18 seconds later. >>> >>> >>> pi@corbett:~ $ wee_debug --info >>> Using verbosity=1, displaying most info >>> >>> wee_debug output will be sent to stdout(console) >>> >>> Using configuration file /etc/weewx/weewx.conf >>> Using database binding 'wx_binding', which is bound to database >>> 'archive_sqlite' >>> >>> System info >>> Platform: Linux-4.19.66-v7+-armv7l-with-debian-9.13 >>> Python Version: 2.7.13 >>> >>> Load Information >>> 1 minute load average: 0.00 >>> 5 minute load average: 0.00 >>> 15 minute load average: 0.00 >>> >>> General Weewx info >>> Weewx version 4.2.0 detected. >>> >>> Station info >>> Station type: Vantage >>> Driver: weewx.drivers.vantage >>> >>> Driver info >>> [Vantage] >>> # This section is for the Davis Vantage series of weather stations. >>> >>> # Connection type: serial or ethernet >>> # serial (the classic VantagePro) >>> # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) >>> type = serial >>> >>> # If the connection type is serial, a port must be specified: >>> # Debian, Ubuntu, Redhat, Fedora, and SuSE: >>> # /dev/ttyUSB0 is a common USB port name >>> # /dev/ttyS0 is a common serial port name >>> # BSD: >>> # /dev/cuaU0 is a common serial port name >>> port = /dev/ttyUSB0 >>> >>> # If the connection type is ethernet, an IP Address/hostname is >>> required: >>> host = 1.2.3.4 >>> >>> ###################################################### >>> # The rest of this section rarely needs any attention. >>> # You can safely leave it "as is." >>> ###################################################### >>> >>> # Serial baud rate (usually 19200) >>> baudrate = 19200 >>> >>> # TCP port (when using the WeatherLinkIP) >>> tcp_port = 22222 >>> >>> # TCP send delay (when using the WeatherLinkIP): >>> tcp_send_delay = 0.5 >>> >>> # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both >>> loop_request = 1 >>> >>> # The id of your ISS station (usually 1). If you use a wind meter >>> connected >>> # to a anemometer transmitter kit, use its id >>> iss_id = 1 >>> >>> # How long to wait for a response from the station before giving up >>> (in >>> # seconds; must be greater than 2) >>> timeout = 4 >>> >>> # How long to wait before trying again (in seconds) >>> wait_before_retry = 1.2 >>> >>> # How many times to try before giving up: >>> max_tries = 4 >>> >>> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 >>> model_type = 2 >>> >>> # The driver to use: >>> driver = weewx.drivers.vantage >>> >>> Currently installed extensions >>> Extension Name Version Description >>> mqtt 0.23 Upload weather data to MQTT server. >>> forecast 3.3.2 Generate and display weather and tide >>> forecasts. >>> >>> Archive info >>> Database name: weewx.sdb >>> Table name: archive >>> Version 2 >>> Unit system: 1 (US) >>> First good timestamp: 2019-07-03 21:35:00 PDT (1562214900) >>> Last good timestamp: 2021-01-03 20:10:00 PST (1609733400) >>> Number of records: 156772 >>> weewx (weewx.conf) is set to use an archive interval of 300 seconds. >>> The station hardware was not interrogated in determining archive >>> interval. >>> >>> Databases configured in weewx.conf >>> Database name: weewx.sdb >>> Database driver: weedb.sqlite >>> >>> Database name: weewx >>> Database driver: weedb.mysql >>> Database host: localhost >>> >>> Database name: forecast.sdb >>> Database driver: weedb.sqlite >>> >>> >>> Parsed and obfuscated weewx.conf >>> # WEEWX CONFIGURATION FILE >>> # >>> # Copyright (c) 2009-2019 Tom Keffer <tke...@gmail.com> >>> # See the file LICENSE.txt for your rights. >>> >>> >>> ############################################################################## >>> >>> # This section is for general configuration information. >>> >>> # Set to 1 for extra debug info, otherwise comment it out or set to zero >>> debug = 1 >>> >>> # Root directory of the weewx data file hierarchy for this station >>> WEEWX_ROOT = / >>> >>> # Whether to log successful operations >>> log_success = True >>> >>> # Whether to log unsuccessful operations >>> log_failure = True >>> >>> # How long to wait before timing out a socket (FTP, HTTP) connection >>> socket_timeout = 20 >>> >>> # Do not modify this. It is used when installing and updating weewx. >>> version = 4.2.0 >>> >>> >>> ############################################################################## >>> >>> # This section is for information about the station. >>> >>> [Station] >>> >>> # Description of the station location >>> location = "Corbett Ln. : Portland, OR" >>> >>> # Latitude and longitude in decimal degrees >>> latitude = 45.4557641 >>> longitude = -122.6769627 >>> >>> # Altitude of the station, with unit it is in. This is downloaded >>> from >>> # from the station if the hardware supports it. >>> altitude = 475, foot >>> >>> # Set to type of station hardware. There must be a corresponding >>> stanza >>> # in this file with a 'driver' parameter indicating the driver to be >>> used. >>> station_type = Vantage >>> >>> # If you have a website, you may specify an URL >>> station_url = XXX obfuscated by wee_debug XXX >>> >>> # The start of the rain year (1=January; 10=October, etc.). This is >>> # downloaded from the station if the hardware supports it. >>> rain_year_start = 10 >>> >>> # Start of week (0=Monday, 6=Sunday) >>> week_start = 6 >>> >>> >>> ############################################################################## >>> >>> [Vantage] >>> # This section is for the Davis Vantage series of weather stations. >>> >>> # Connection type: serial or ethernet >>> # serial (the classic VantagePro) >>> # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) >>> type = serial >>> >>> # If the connection type is serial, a port must be specified: >>> # Debian, Ubuntu, Redhat, Fedora, and SuSE: >>> # /dev/ttyUSB0 is a common USB port name >>> # /dev/ttyS0 is a common serial port name >>> # BSD: >>> # /dev/cuaU0 is a common serial port name >>> port = /dev/ttyUSB0 >>> >>> # If the connection type is ethernet, an IP Address/hostname is >>> required: >>> host = 1.2.3.4 >>> >>> ###################################################### >>> # The rest of this section rarely needs any attention. >>> # You can safely leave it "as is." >>> ###################################################### >>> >>> # Serial baud rate (usually 19200) >>> baudrate = 19200 >>> >>> # TCP port (when using the WeatherLinkIP) >>> tcp_port = 22222 >>> >>> # TCP send delay (when using the WeatherLinkIP): >>> tcp_send_delay = 0.5 >>> >>> # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both >>> loop_request = 1 >>> >>> # The id of your ISS station (usually 1). If you use a wind meter >>> connected >>> # to a anemometer transmitter kit, use its id >>> iss_id = 1 >>> >>> # How long to wait for a response from the station before giving up >>> (in >>> # seconds; must be greater than 2) >>> timeout = 4 >>> >>> # How long to wait before trying again (in seconds) >>> wait_before_retry = 1.2 >>> >>> # How many times to try before giving up: >>> max_tries = 4 >>> >>> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 >>> model_type = 2 >>> >>> # The driver to use: >>> driver = weewx.drivers.vantage >>> >>> >>> ############################################################################## >>> >>> [AcuRite] >>> # This section is for AcuRite weather stations. >>> >>> # The station model, e.g., 'AcuRite 01025' or 'AcuRite 02032C' >>> model = AcuRite 01036 >>> >>> # The driver to use: >>> driver = weewx.drivers.acurite >>> >>> >>> ############################################################################## >>> >>> # This section is for uploading data to Internet sites >>> >>> [StdRESTful] >>> >>> [[MQTT]] >>> server_url = XXX obfuscated by wee_debug XXX >>> topic = corbett/weather >>> retain = True >>> >>> [[StationRegistry]] >>> # To register this weather station with weewx, set this to true >>> register_this_station = true >>> >>> [[AWEKAS]] >>> # This section is for configuring posts to AWEKAS. >>> >>> # If you wish to do this, set the option 'enable' to true, >>> # and specify a username and password. >>> # To guard against parsing errors, put the password in quotes. >>> enable = false >>> username = XXX obfuscated by wee_debug XXX >>> password = XXX obfuscated by wee_debug XXX >>> >>> [[CWOP]] >>> # This section is for configuring posts to CWOP. >>> >>> # If you wish to do this, set the option 'enable' to true, >>> # and specify the station ID (e.g., CW1234). >>> enable = false >>> station = XXX obfuscated by wee_debug XXX >>> >>> # If this is an APRS (radio amateur) station, uncomment >>> # the following and replace with a passcode (e.g., 12345). >>> #passcode = replace_me (APRS stations only) >>> >>> [[PWSweather]] >>> # This section is for configuring posts to PWSweather.com. >>> >>> # If you wish to do this, set the option 'enable' to true, >>> # and specify a station and password. >>> # To guard against parsing errors, put the password in quotes. >>> enable = false >>> station = XXX obfuscated by wee_debug XXX >>> password = XXX obfuscated by wee_debug XXX >>> >>> [[WOW]] >>> # This section is for configuring posts to WOW. >>> >>> # If you wish to do this, set the option 'enable' to true, >>> # and specify a station and password. >>> # To guard against parsing errors, put the password in quotes. >>> enable = false >>> station = XXX obfuscated by wee_debug XXX >>> password = XXX obfuscated by wee_debug XXX >>> >>> [[Wunderground]] >>> # This section is for configuring posts to the Weather >>> Underground. >>> >>> # If you wish to do this, set the option 'enable' to true, >>> # and specify a station (e.g., 'KORHOODR3') and password. >>> # To guard against parsing errors, put the password in quotes. >>> enable = false >>> station = XXX obfuscated by wee_debug XXX >>> password = XXX obfuscated by wee_debug XXX >>> >>> # Set the following to True to have weewx use the WU "Rapidfire" >>> # protocol. Not all hardware can support it. See the User's >>> Guide. >>> rapidfire = false >>> >>> # If you plan on using wunderfixer, set the following >>> # to your API key: >>> api_key = XXX obfuscated by wee_debug XXX >>> >>> >>> ############################################################################## >>> >>> # This section specifies what reports, using which skins, to generate. >>> >>> [StdReport] >>> >>> # Where the skins reside, relative to WEEWX_ROOT >>> SKIN_ROOT = /etc/weewx/skins >>> >>> # Where the generated reports should go, relative to WEEWX_ROOT >>> HTML_ROOT = /var/www/html/weewx >>> >>> # The database binding indicates which data should be used in >>> reports. >>> data_binding = wx_binding >>> >>> # Whether to log a successful operation >>> log_success = True >>> >>> # Whether to log an unsuccessful operation >>> log_failure = False >>> >>> #### >>> >>> # Each of the following subsections defines a report that will be >>> run. >>> # See the customizing guide to change the units, plot types and line >>> # colors, modify the fonts, display additional sensor data, and other >>> # customizations. Many of those changes can be made here by >>> overriding >>> # parameters, or by modifying templates within the skin itself. >>> >>> [[SeasonsReport]] >>> # The SeasonsReport uses the 'Seasons' skin, which contains the >>> # images, templates and plots for the report. >>> skin = Seasons >>> enable = true >>> >>> [[[CheetahGenerator]]] >>> search_list_extensions = user.forecast.ForecastVariables >>> [[[CopyGenerator]]] >>> copy_once = seasons.css, seasons.js, favicon.ico, >>> font/*.woff, font/*.woff2, forecast_strip.css, icons/* >>> >>> [[SmartphoneReport]] >>> # The SmartphoneReport uses the 'Smartphone' skin, and the >>> images and >>> # files are placed in a dedicated subdirectory. >>> skin = Smartphone >>> enable = true >>> HTML_ROOT = /var/www/html/weewx/smart/ >>> >>> [[MobileReport]] >>> # The MobileReport uses the 'Mobile' skin, and the images and >>> files >>> # are placed in a dedicated subdirectory. >>> skin = Mobile >>> enable = true >>> HTML_ROOT = /var/www/html/weewx/mobile/ >>> >>> [[StandardReport]] >>> # This is the old "Standard" skin. By default, it is not enabled. >>> skin = Standard >>> enable = true >>> HTML_ROOT = /var/www/html/weewx/standard >>> >>> [[forecast]] >>> enable = false >>> HTML_ROOT = /var/www/html/weewx/forecast >>> skin = forecast >>> >>> [[FTP]] >>> # FTP'ing the results to a webserver is treated as just another >>> report, >>> # albeit one with an unusual report generator! >>> skin = Ftp >>> >>> # If you wish to use FTP, set "enable" to "true", then >>> # fill out the next four lines. >>> # Use quotes around passwords to guard against parsing errors. >>> enable = false >>> user = XXX obfuscated by wee_debug XXX >>> password = XXX obfuscated by wee_debug XXX >>> server = replace_me # The ftp server name, e.g, >>> www.myserver.org >>> path = replace_me # The destination directory, e.g., /weather >>> >>> # Set to True for an FTP over TLS (FTPS) connection. Not all >>> servers >>> # support this. >>> secure_ftp = False >>> >>> # To upload files from something other than what HTML_ROOT is set >>> # to above, specify a different HTML_ROOT here. >>> #HTML_ROOT = /var/www/html/weewx >>> >>> # Most FTP servers use port 21 >>> port = 21 >>> >>> # Set to 1 to use passive mode, zero for active mode >>> passive = 1 >>> >>> [[RSYNC]] >>> # rsync'ing to a webserver is treated as just another report >>> skin = Rsync >>> >>> # If you wish to use rsync, you must configure passwordless ssh >>> using >>> # public/private key authentication from the user account that >>> weewx >>> # runs to the user account on the remote machine where the files >>> # will be copied. >>> # >>> # If you wish to use rsync, set "enable" to "true", then >>> # fill out server, user, and path. >>> # The server should appear in your .ssh/config file. >>> # The user is the username used in the identity file. >>> # The path is the destination directory, such as >>> /var/www/html/weather. >>> # Be sure that the user has write permissions on the destination! >>> enable = false >>> server = replace_me >>> user = XXX obfuscated by wee_debug XXX >>> path = replace_me >>> >>> # To upload files from something other than what HTML_ROOT is set >>> # to above, specify a different HTML_ROOT here. >>> #HTML_ROOT = /var/www/html/weewx >>> >>> # Rsync can be configured to remove files from the remote server >>> if >>> # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if >>> you >>> # make a mistake in the remote path, you could could >>> unintentionally >>> # cause unrelated files to be deleted. Set to 1 to enable remote >>> file >>> # deletion, zero to allow files to accumulate remotely. >>> delete = 0 >>> >>> #### >>> >>> # Various options for customizing your reports. >>> >>> [[Defaults]] >>> >>> [[[Units]]] >>> >>> # The following section sets what unit to use for each unit >>> group. >>> # NB: The unit is always in the singular. I.e., >>> 'mile_per_hour', >>> # NOT 'miles_per_hour' >>> [[[[Groups]]]] >>> >>> group_altitude = foot # Options are 'foot' or 'meter' >>> group_degree_day = degree_F_day # Options are >>> 'degree_F_day' or 'degree_C_day' >>> group_pressure = inHg # Options are 'inHg', 'mmHg', >>> 'mbar', or 'hPa' >>> group_rain = inch # Options are 'inch', 'cm', or 'mm' >>> group_rainrate = inch_per_hour # Options are >>> 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' >>> group_speed = mile_per_hour # Options are >>> 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second' >>> group_speed2 = mile_per_hour2 # Options are >>> 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2' >>> group_temperature = degree_F # Options are 'degree_F' >>> or 'degree_C' >>> group_distance = mile >>> >>> # The following section sets the formatting for each type of >>> unit. >>> [[[[StringFormats]]]] >>> >>> centibar = %.0f >>> cm = %.2f >>> cm_per_hour = %.2f >>> degree_C = %.1f >>> degree_F = %.1f >>> degree_compass = %.0f >>> foot = %.0f >>> hPa = %.1f >>> hour = %.1f >>> inHg = %.3f >>> inch = %.2f >>> inch_per_hour = %.2f >>> km_per_hour = %.0f >>> km_per_hour2 = %.1f >>> knot = %.0f >>> knot2 = %.1f >>> mbar = %.1f >>> meter = %.0f >>> meter_per_second = %.1f >>> meter_per_second2 = %.1f >>> mile_per_hour = %.0f >>> mile_per_hour2 = %.1f >>> mm = %.1f >>> mmHg = %.1f >>> mm_per_hour = %.1f >>> percent = %.0f >>> second = %.0f >>> uv_index = %.1f >>> volt = %.1f >>> watt_per_meter_squared = %.0f >>> NONE = " N/A" >>> >>> # The following section sets the label for each type of unit >>> [[[[Labels]]]] >>> >>> day = " day", " days" >>> hour = " hour", " hours" >>> minute = " minute", " minutes" >>> second = " second", " seconds" >>> NONE = "" >>> >>> # The following section sets the format for each time scale. >>> # The values below will work in every locale, but they may >>> not look >>> # particularly attractive. >>> [[[[TimeFormats]]]] >>> >>> hour = %H:%M >>> day = %X >>> week = %X (%A) >>> month = %x %X >>> year = %x %X >>> rainyear = %x %X >>> current = %x %X >>> ephem_day = %X >>> ephem_year = %x %X >>> >>> [[[[Ordinates]]]] >>> >>> # Ordinal directions. The last one is for no wind >>> direction >>> directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, >>> SW, WSW, W, WNW, NW, NNW, N/A >>> >>> # The following section sets the base temperatures used for >>> the >>> # calculation of heating and cooling degree-days. >>> [[[[DegreeDays]]]] >>> >>> # Base temperature for heating days, with unit: >>> heating_base = 65, degree_F >>> # Base temperature for cooling days, with unit: >>> cooling_base = 65, degree_F >>> # Base temperature for growing days, with unit: >>> growing_base = 50.0, degree_F >>> >>> # A trend takes a difference across a time period. The >>> following >>> # section sets the time period, and how big an error is >>> allowed to >>> # still be counted as the start or end of a period. >>> [[[[Trend]]]] >>> >>> time_delta = 10800 # 3 hours >>> time_grace = 300 # 5 minutes >>> >>> # The labels to be used for each observation type >>> [[[Labels]]] >>> >>> # Set to hemisphere abbreviations suitable for your location: >>> hemispheres = N, S, E, W >>> >>> # Formats to be used for latitude whole degrees, longitude >>> whole >>> # degrees, and minutes: >>> latlon_formats = %02d, %03d, %05.2f >>> >>> # Generic labels, keyed by an observation type. >>> [[[[Generic]]]] >>> barometer = Barometer >>> dewpoint = Dew Point >>> ET = ET >>> heatindex = Heat Index >>> inHumidity = Inside Humidity >>> inTemp = Inside Temperature >>> outHumidity = Humidity >>> outTemp = Outside Temperature >>> radiation = Radiation >>> rain = Rain >>> rainRate = Rain Rate >>> UV = UV Index >>> windDir = Wind Direction >>> windGust = Gust Speed >>> windGustDir = Gust Direction >>> windSpeed = Wind Speed >>> windchill = Wind Chill >>> windgustvec = Gust Vector >>> windvec = Wind Vector >>> extraTemp1 = Temperature1 >>> extraTemp2 = Temperature2 >>> extraTemp3 = Temperature3 >>> >>> # Sensor status indicators >>> >>> rxCheckPercent = Signal Quality >>> txBatteryStatus = Transmitter Battery >>> windBatteryStatus = Wind Battery >>> rainBatteryStatus = Rain Battery >>> outTempBatteryStatus = Outside Temperature Battery >>> inTempBatteryStatus = Inside Temperature Battery >>> consBatteryVoltage = Console Battery >>> heatingVoltage = Heating Battery >>> supplyVoltage = Supply Voltage >>> referenceVoltage = Reference Voltage >>> >>> [[[Almanac]]] >>> >>> # The labels to be used for the phases of the moon: >>> moon_phases = New, Waxing crescent, First quarter, Waxing >>> gibbous, Full, Waning gibbous, Last quarter, Waning crescent >>> >>> >>> ############################################################################## >>> >>> # This service acts as a filter, converting the unit system coming from >>> # the hardware to a unit system in the database. >>> >>> [StdConvert] >>> >>> # The target_unit affects only the unit system in the database. Once >>> # chosen it cannot be changed without converting the entire database. >>> # Modification of target_unit after starting weewx will result in >>> # corrupt data - the database will contain a mix of US and METRIC >>> data. >>> # >>> # The value of target_unit does not affect the unit system for >>> # reporting - reports can display US, Metric, or any combination of >>> units. >>> # >>> # In most cases, target_unit should be left as the default: US >>> # >>> # In particular, those migrating from a standard wview installation >>> # should use US since that is what the wview database contains. >>> >>> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! >>> target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' >>> >>> >>> ############################################################################## >>> >>> # This section can adjust data using calibration expressions. >>> >>> [StdCalibrate] >>> >>> [[Corrections]] >>> # For each type, an arbitrary calibration expression can be >>> given. >>> # It should be in the units defined in the StdConvert section. >>> # Example: >>> foo = foo + 0.2 >>> >>> >>> ############################################################################## >>> >>> # This section is for quality control checks. If units are not >>> specified, >>> # values must be in the units defined in the StdConvert section. >>> >>> [StdQC] >>> >>> [[MinMax]] >>> barometer = 26, 32.5, inHg >>> pressure = 24, 34.5, inHg >>> outTemp = -40, 120, degree_F >>> inTemp = 10, 120, degree_F >>> outHumidity = 0, 100 >>> inHumidity = 0, 100 >>> windSpeed = 0, 120, mile_per_hour >>> rain = 0, 10, inch >>> >>> >>> ############################################################################## >>> >>> # This section controls the origin of derived values. >>> >>> [StdWXCalculate] >>> >>> [[Calculations]] >>> # How to calculate derived quantities. Possible values are: >>> # hardware - use the value provided by hardware >>> # software - use the value calculated by weewx >>> # prefer_hardware - use value provide by hardware if available, >>> # otherwise use value calculated by weewx >>> >>> pressure = prefer_hardware >>> barometer = prefer_hardware >>> altimeter = prefer_hardware >>> windchill = prefer_hardware >>> heatindex = prefer_hardware >>> dewpoint = prefer_hardware >>> inDewpoint = prefer_hardware >>> rainRate = prefer_hardware >>> maxSolarRad = prefer_hardware >>> cloudbase = prefer_hardware >>> humidex = prefer_hardware >>> appTemp = prefer_hardware >>> ET = prefer_hardware >>> windrun = prefer_hardware >>> >>> >>> ############################################################################## >>> >>> # For hardware that supports it, this section controls how often the >>> # onboard clock gets updated. >>> >>> [StdTimeSynch] >>> >>> # How often to check the weather station clock for drift (in seconds) >>> clock_check = 14400 >>> >>> # How much it can drift before we will correct it (in seconds) >>> max_drift = 5 >>> >>> >>> ############################################################################## >>> >>> # This section is for configuring the archive service. >>> >>> [StdArchive] >>> >>> # If the station hardware supports data logging then the archive >>> interval >>> # will be downloaded from the station. Otherwise, specify it (in >>> seconds). >>> archive_interval = 300 >>> >>> # If possible, new archive records are downloaded from the station >>> # hardware. If the hardware does not support this, then new archive >>> # records will be generated in software. >>> # Set the following to "software" to force software record >>> generation. >>> record_generation = software >>> >>> # Whether to include LOOP data in hi/low statistics >>> loop_hilo = True >>> >>> # The data binding used to save archive records >>> data_binding = wx_binding >>> >>> >>> ############################################################################## >>> >>> # This section binds a data store to a database. >>> >>> [DataBindings] >>> >>> [[wx_binding]] >>> # The database must match one of the sections in [Databases]. >>> # This is likely to be the only option you would want to change. >>> database = archive_sqlite >>> # The name of the table within the database >>> table_name = archive >>> # The manager handles aggregation of data for historical >>> summaries >>> manager = weewx.wxmanager.WXDaySummaryManager >>> # The schema defines the structure of the database. >>> # It is *only* used when the database is created. >>> schema = schemas.wview.schema >>> [[forecast_binding]] >>> database = forecast_sqlite >>> >>> >>> ############################################################################## >>> >>> # This section defines various databases. >>> >>> [Databases] >>> >>> # A SQLite database is simply a single file >>> [[archive_sqlite]] >>> database_name = weewx.sdb >>> database_type = SQLite >>> >>> # MySQL >>> [[archive_mysql]] >>> database_name = weewx >>> database_type = MySQL >>> [[forecast_sqlite]] >>> database_name = forecast.sdb >>> database_type = SQLite >>> >>> >>> ############################################################################## >>> >>> # This section defines defaults for the different types of databases. >>> >>> [DatabaseTypes] >>> >>> # Defaults for SQLite databases >>> [[SQLite]] >>> driver = weedb.sqlite >>> # Directory in which the database files are located >>> SQLITE_ROOT = /var/lib/weewx >>> >>> # Defaults for MySQL databases >>> [[MySQL]] >>> driver = weedb.mysql >>> # The host where the database is located >>> host = localhost >>> # The user name for logging in to the host >>> user = XXX obfuscated by wee_debug XXX >>> # The password for the user name (quotes guard against parsing >>> errors) >>> password = XXX obfuscated by wee_debug XXX >>> >>> >>> ############################################################################## >>> >>> # This section configures the internal weewx engine. >>> >>> [Engine] >>> # The following section specifies which services should be run and >>> in what order. >>> [[Services]] >>> prep_services = weewx.engine.StdTimeSynch >>> data_services = , >>> process_services = weewx.engine.StdConvert, >>> weewx.engine.StdCalibrate, weewx.engine.StdQC, >>> weewx.wxservices.StdWXCalculate >>> xtype_services = weewx.wxxtypes.StdWXXTypes, >>> weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, >>> weewx.wxxtypes.StdDelta >>> archive_services = weewx.engine.StdArchive, >>> user.forecast.ZambrettiForecast, user.forecast.NWSForecast, >>> user.forecast.WUForecast, user.forecast.OWMForecast, >>> user.forecast.UKMOForecast, user.forecast.AerisForecast, >>> user.forecast.WWOForecast, user.forecast.DSForecast, >>> user.forecast.XTideForecast >>> restful_services = weewx.restx.StdStationRegistry, >>> weewx.restx.StdWunderground, weewx.restx.StdPWSweather, >>> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS, >>> user.mqtt.MQTT >>> report_services = weewx.engine.StdPrint, weewx.engine.StdReport >>> >>> >>> ############################################################################## >>> >>> # Options for extension 'forecast' >>> [Forecast] >>> data_binding = forecast_binding >>> [[OWM]] >>> api_key = XXX obfuscated by wee_debug XXX >>> [[WWO]] >>> api_key = XXX obfuscated by wee_debug XXX >>> [[WU]] >>> api_key = XXX obfuscated by wee_debug XXX >>> [[NWS]] >>> lid = ORZ006 >>> foid = PQR >>> [[UKMO]] >>> api_key = XXX obfuscated by wee_debug XXX >>> location = INSERT_UK_LOCATION_HERE >>> [[XTide]] >>> location = "INSERT_LOCATION_HERE (e.g., Boston)" >>> [[Zambretti]] >>> hemisphere = NORTH >>> [[Aeris]] >>> client_secret = INSERT_AERIS_CLIENT_SECRET_HERE >>> client_id = INSERT_AERIS_CLIENT_ID_HERE >>> [[DS]] >>> api_key = XXX obfuscated by wee_debug XXX >>> >>> wee_debug report successfully generated >>> >>> On Sun, Jan 3, 2021 at 7:31 PM gjr80 <gjrod...@gmail.com> wrote: >>> >>>> Hi, >>>> >>>> That is interesting, you have debug = 1 but the detail that is showing >>>> in the log is less than there should be. Could you please post the output >>>> from wee_debug --info >>>> <http://weewx.com/docs/utilities.htm#wee_debug_utility>. Before >>>> posting the wee_debug output check to make sure there is no sensitive >>>> info in the output such as user names, passwords, api keys etc, wee_debug >>>> will obfuscate such info but it is not perfect. >>>> >>>> Gary >>>> >>>> On Monday, 4 January 2021 at 12:58:27 UTC+10 blu...@gmail.com wrote: >>>> >>>>> On my Seasons skins, for some reason the index.html file isn't getting >>>>> updated. I don't remember changing anything since the 1/1/21 @ 11:55pm >>>>> timestamp of the last update. >>>>> >>>>> The Standard and Mobile versions are both updating correctly. >>>>> >>>>> http://wx.ke7k.com/ >>>>> >>>>> I changed debug = 1 and restarted.... >>>>> >>>>> Jan 3 18:24:29 corbett weewx[18565] INFO __main__: Initializing weewx >>>>> version 4.2.0 >>>>> Jan 3 18:24:29 corbett weewx[18565] INFO __main__: Using Python >>>>> 2.7.13 (default, Aug 22 2020, 10:03:02) #012[GCC 6.3.0 20170516] >>>>> Jan 3 18:24:29 corbett weewx[18565] INFO __main__: Platform >>>>> Linux-4.19.66-v7+-armv7l-with-debian-9.13 >>>>> Jan 3 18:24:29 corbett weewx[18565] INFO __main__: Locale is >>>>> 'en_US.UTF-8' >>>>> Jan 3 18:24:29 corbett weewx[18565] INFO __main__: PID file is >>>>> /var/run/weewx.pid >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO __main__: Using >>>>> configuration file /etc/weewx/weewx.conf >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO __main__: Debug is 1 >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: Loading >>>>> station type Vantage (weewx.drivers.vantage) >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: StdConvert >>>>> target unit is 0x1 >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: Archive will >>>>> use data binding wx_binding >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: Record >>>>> generation will be attempted in 'software' >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: Using archive >>>>> interval of 300 seconds (software record generation) >>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: Zambretti: >>>>> forecast version 3.3.2 >>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: Zambretti: >>>>> interval=600 max_age=604800 winddir_period=1800 pressure_period=10800 >>>>> hemisphere=NORTH lower_pressure=950.0 upper_pressure=1050.0 >>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: NWS: forecast >>>>> version 3.3.2 >>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: NWS: >>>>> interval=10800 max_age=604800 lid=ORZ006 foid=PQR >>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: WU: forecast >>>>> version 3.3.2 >>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: OWM: forecast >>>>> version 3.3.2 >>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: UKMO: forecast >>>>> version 3.3.2 >>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: Aeris: forecast >>>>> version 3.3.2 >>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: WWO: forecast >>>>> version 3.3.2 >>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: DS: forecast >>>>> version 3.3.2 >>>>> Jan 3 18:24:29 corbett weewxd: forecast: MainThread: XTide: forecast >>>>> version 3.3.2 >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.restx: >>>>> StationRegistry: Station will be registered. >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.restx: Wunderground: >>>>> Posting not enabled. >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.restx: PWSweather: >>>>> Posting not enabled. >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.restx: CWOP: Posting >>>>> not enabled. >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.restx: WOW: Posting >>>>> not enabled. >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.restx: AWEKAS: Posting >>>>> not enabled. >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO user.mqtt: service version >>>>> is 0.23 >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO user.mqtt: binding to archive >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO user.mqtt: topic is >>>>> corbett/weather >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO user.mqtt: data will be >>>>> uploaded to mqtt://127.0.0.1:1883 >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO __main__: Starting up weewx >>>>> version 4.2.0 >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: Clock error is >>>>> 0.07 seconds (positive is fast) >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.engine: Using binding >>>>> 'wx_binding' to database 'weewx.sdb' >>>>> Jan 3 18:24:29 corbett weewx[18569] INFO weewx.manager: Starting >>>>> backfill of daily summaries >>>>> Jan 3 18:24:32 corbett weewx[18569] INFO weewx.engine: Starting main >>>>> packet loop. >>>>> Jan 3 18:25:14 corbett weewx[18569] INFO weewx.manager: Added record >>>>> 2021-01-03 18:25:00 PST (1609727100) to database 'weewx.sdb' >>>>> Jan 3 18:25:14 corbett weewx[18569] INFO weewx.manager: Added record >>>>> 2021-01-03 18:25:00 PST (1609727100) to daily summary in 'weewx.sdb' >>>>> Jan 3 18:25:14 corbett weewxd: forecast: NWSThread: NWS: downloading >>>>> forecast from ' >>>>> http://forecast.weather.gov/product.php?site=NWS&product=PFM&format=txt&issuedby=PQR >>>>> ' >>>>> Jan 3 18:25:15 corbett weewx[18569] INFO weewx.restx: MQTT: Published >>>>> record 2021-01-03 18:25:00 PST (1609727100) >>>>> Jan 3 18:25:15 corbett weewx[18569] INFO weewx.restx: >>>>> StationRegistry: Published record 2021-01-03 18:25:00 PST (1609727100) >>>>> Jan 3 18:25:15 corbett weewxd: forecast: ZambrettiThread: Zambretti: >>>>> generated 1 forecast record >>>>> Jan 3 18:25:20 corbett weewx[18569] INFO weewx.cheetahgenerator: >>>>> Generated 7 files for report SeasonsReport in 5.29 seconds >>>>> Jan 3 18:25:20 corbett weewxd: forecast: NWSThread: NWS: got 40 >>>>> forecast records for Scappoose-Columbia OR 45.77N 122.86W Elev. 49 ft >>>>> Jan 3 18:25:21 corbett weewx[18569] INFO weewx.imagegenerator: >>>>> Generated 14 images for report SeasonsReport in 1.05 seconds >>>>> Jan 3 18:25:21 corbett weewx[18569] INFO weewx.reportengine: Copied >>>>> 87 files to /var/www/html/weewx >>>>> Jan 3 18:25:21 corbett weewx[18569] INFO weewx.cheetahgenerator: >>>>> Generated 6 files for report SmartphoneReport in 0.35 seconds >>>>> Jan 3 18:25:22 corbett weewx[18569] INFO weewx.imagegenerator: >>>>> Generated 6 images for report SmartphoneReport in 0.38 seconds >>>>> Jan 3 18:25:22 corbett weewx[18569] INFO weewx.reportengine: Copied 6 >>>>> files to /var/www/html/weewx/smart/ >>>>> Jan 3 18:25:22 corbett weewx[18569] INFO weewx.cheetahgenerator: >>>>> Generated 1 files for report MobileReport in 0.11 seconds >>>>> Jan 3 18:25:22 corbett weewx[18569] INFO weewx.imagegenerator: >>>>> Generated 4 images for report MobileReport in 0.26 seconds >>>>> Jan 3 18:25:22 corbett weewx[18569] INFO weewx.reportengine: Copied 2 >>>>> files to /var/www/html/weewx/mobile/ >>>>> Jan 3 18:25:26 corbett weewx[18569] INFO weewx.cheetahgenerator: >>>>> Generated 14 files for report StandardReport in 3.95 seconds >>>>> Jan 3 18:25:27 corbett weewx[18569] INFO weewx.imagegenerator: >>>>> Generated 12 images for report StandardReport in 0.80 seconds >>>>> Jan 3 18:25:27 corbett weewx[18569] INFO weewx.reportengine: Copied >>>>> 14 files to /var/www/html/weewx/standard >>>>> >>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to weewx-user+...@googlegroups.com. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/abfd3be6-b829-4b40-98c4-751dcc0cf047n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/abfd3be6-b829-4b40-98c4-751dcc0cf047n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/85887876-1b16-4c71-a060-e203b54b3f15n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/85887876-1b16-4c71-a060-e203b54b3f15n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/82a2dc38-e1da-4d32-9a4d-2a610a454355n%40googlegroups.com.