> remote_server = ftpupload.net I would expect the remote server to be kairos.moudania.com It looks like you are trying to use an ftp server. If so, that simply won’t work. If you don’t have ssh access to your server, such that you can get rsync to work, you will not be able to use the loopdata extension.
> On Jan 26, 2021, at 12:00 PM, Δημήτρης Βήχος <hobbyline...@gmail.com> wrote: > > i have setup for loopdata > > [LoopData] > [[FileSpec]] > loop_data_dir = . > filename = loop-data.txt > [[Formatting]] > target_report = LoopDataReport > [[LoopFrequency]] > seconds = 30 > [[RsyncSpec]] > enable = true > remote_server = ftpupload.net > remote_user = epiz_27298028 > remote_dir = /htdocs/test > compress = true > log_success = true > ssh_options = -o ConnectTimeout=1 > timeout = 1 > skip_if_older_than = 3 > [[Include]] > fields = trend.outTemp, trend.barometer.desc, current.barometer, > current.dateTime.raw, current.dewpoint, current.dewpoint.formatted, > current.heatindex, current.outHumidity, current.outTemp, > current.outTemp.formatted, current.rain, current.rainRate, > current.rainRate.formatted, current.windchill, > current.windDir.ordinal_compass, current.windSpeed, > current.windSpeed.formatted, current.windSpeed.raw, > 10m.outTemp.max.formatted, 10m.outTemp.min.formatted, 10m.rain.sum.formatted, > 10m.wind.rms.formatted, 10m.windGust.max, 10m.windGust.max.formatted, > day.outTemp.max.formatted, day.outTemp.min.formatted, day.rain.sum, > day.rain.sum.formatted, day.wind.rms.formatted, day.windGust.max, > day.windGust.max.formatted, week.outTemp.max.formatted, > week.outTemp.min.formatted, week.rain.sum.formatted, week.wind.rms.formatted, > week.windGust.max.formatted, month.outTemp.max.formatted, > month.outTemp.min.formatted, month.rain.sum.formatted, > month.wind.rms.formatted, month.windGust.max.formatted, > year.outTemp.max.formatted, year.outTemp.min.formatted, > year.rain.sum.formatted, year.wind.rms.formatted, > year.windGust.max.formatted, rainyear.outTemp.max.formatted, > rainyear.outTemp.min.formatted, rainyear.rain.sum.formatted, > rainyear.wind.rms.formatted, rainyear.windGust.max.formatted > [[BarometerTrendDescriptions]] > RISING_VERY_RAPIDLY = Rising Very Rapidly > RISING_QUICKLY = Rising Quickly > RISING = Rising > RISING_SLOWLY = Rising Slowly > STEADY = Steady > FALLING_SLOWLY = Falling Slowly > FALLING = Falling > FALLING_QUICKLY = Falling Quickly > FALLING_VERY_RAPIDLY = Falling Very Rapidly > > Στις Τρίτη, 26 Ιανουαρίου 2021 στις 9:12:55 μ.μ. UTC+2, ο χρήστης > jo...@johnkline.com έγραψε: >> As the README states: >> If you need the loop-data.txt file pushed to a remote webserver, you will >> also need to fill in the RsyncSpec fields; but one can fill that in later, >> after LoopData is up and running. >> >> It appears loopdata is up and running and working on the local machine. >> Have you set up rsync for loopdata? >> >> Please see the following sections of the README: >> >> https://github.com/chaunceygardiner/weewx-loopdata#entries-in-loopdata-sections-of-weewxconf >> >> https://github.com/chaunceygardiner/weewx-loopdata#rsync-isnt-working-for-me-help >> >> https://github.com/chaunceygardiner/weewx-loopdata#do-i-have-to-use-rsync-to-sync-loop-datatxt-to-a-remote-server >> >> https://github.com/chaunceygardiner/weewx-loopdata#what-about-those-rsync-errors-in-the-log >> >>>> On Jan 26, 2021, at 10:34 AM, Δημήτρης Βήχος <hobbyl...@gmail.com> wrote: >>>> >>> its correct i have remote server. in remote server uploading the >>> loop-data.txt but uploadind every 5 minutes . >> >>> >>> >>> Στις Τρίτη, 26 Ιανουαρίου 2021 στις 6:20:42 μ.μ. UTC+2, ο χρήστης >>> jo...@johnkline.com έγραψε: >>>> OK, the behavior we are seeing leads me to believe your web server is on a >>>> remote machine; i.e., not on the same machine as weewx. Is that correct? >>>> If so, you’ll need to use rsync by filling out and enabling it under: >>>> >>>> [LoopData] >>>> [[RsyncSpec]] >>>> >>>> >>>>>> On Jan 26, 2021, at 7:57 AM, Δημήτρης Βήχος <hobbyl...@gmail.com> wrote: >>>>>> >>>>> well the actuall /loopdata localhost/weewx/loopdata , refreshing >>>>> every 60 seconds its ok. but in weather page refreshing every 5 minutes >>>>> >>>>> Στις Τρίτη, 26 Ιανουαρίου 2021 στις 5:45:32 μ.μ. UTC+2, ο χρήστης >>>>> jo...@johnkline.com έγραψε: >>>>>> Again, how often does your driver write loop records? >>>>>> >>>>>> loop-data.txt is not written in reporting cycles. I am asking you to >>>>>> look at the actual loop-data.txt file that is written to the >>>>>> .../loopdata directory. How often does the contents of that file change. >>>>>> >>>>>> Also, please show what entries you are seeing in the log every one >>>>>> minute. >>>>>> >>>>>>>> On Jan 26, 2021, at 7:37 AM, Δημήτρης Βήχος <hobbyl...@gmail.com> >>>>>>>> wrote: >>>>>>>> >>>>>>> loop-data.txt updates every 5 minutes in web page. but in log see >>>>>>> loop-data.txt every 60 secs >>>>>> >>>>>>> >>>>>>> >>>>>>> Στις Τρίτη, 26 Ιανουαρίου 2021 στις 5:19:17 μ.μ. UTC+2, ο χρήστης >>>>>>> jo...@johnkline.com έγραψε: >>>>>>>> How often does your driver write loop records? >>>>>>>> Would you please check the actual loop-data.txt file, rather than the >>>>>>>> skin’s report, to see if that file is being updated on every loop >>>>>>>> record? >>>>>>>> >>>>>>>>>> On Jan 26, 2021, at 7:15 AM, Δημήτρης Βήχος <hobbyl...@gmail.com> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>> the loop-data.txt >>>>>>>> >>>>>>>>> >>>>>>>>> https://kairos.moudania.com/kolxiko/loopdata/ >>>>>>>>> >>>>>>>>> Στις Τρίτη, 26 Ιανουαρίου 2021 στις 5:07:58 μ.μ. UTC+2, ο χρήστης >>>>>>>>> jo...@johnkline.com έγραψε: >>>>>>>>>> > but data refresh every 5 minutes, with the rest skins of weewx >>>>>>>>>> >>>>>>>>>> Exactly what data are you talking about that refreshes every five >>>>>>>>>> minutes? >>>>>>>>>> >>>>>>>>>>>> On Jan 26, 2021, at 6:02 AM, Δημήτρης Βήχος <hobbyl...@gmail.com> >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>> i was easily installed the loop-data extension yesterday. i use >>>>>>>>>>> weewx 4.3 with wh1080 weather station, but data refresh every 5 >>>>>>>>>>> minutes, with the rest skins of weewx >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Στις Πέμπτη, 26 Νοεμβρίου 2020 στις 6:46:10 μ.μ. UTC+2, ο χρήστης >>>>>>>>>>> jo...@johnkline.com έγραψε: >>>>>>>>>>>> Thanks for letting me know. >>>>>>>>>>>> >>>>>>>>>>>>>> On Nov 26, 2020, at 7:32 AM, geoffs...@gmail.com >>>>>>>>>>>>>> <geoffs...@gmail.com> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>> Hi John, >>>>>>>>>>>>> >>>>>>>>>>>>> Works great. Here is what I added to the loop-data.py >>>>>>>>>>>>> >>>>>>>>>>>>> Line 735 self.ten_min_packets, self.cfg.ten_min_obstypes) >>>>>>>>>>>>> # Added to allow specific null keys if no data >>>>>>>>>>>>> available in loop packet >>>>>>>>>>>>> must_have_keys = [ 'current.dateTime', >>>>>>>>>>>>> 'current.extraTemp1.raw', 'current.extraTemp2.raw', >>>>>>>>>>>>> 'current.extraTemp3.raw', 'current.extraHumid1.raw', >>>>>>>>>>>>> 'current.extraHumid2.raw', 'current.extraHumid3.raw' ] >>>>>>>>>>>>> for must_have_key in must_have_keys: >>>>>>>>>>>>> if must_have_key not in loopdata_pkt: >>>>>>>>>>>>> loopdata_pkt[must_have_key] = None >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks! >>>>>>>>>>>>>> On Wednesday, November 25, 2020 at 7:06:46 AM UTC-8 >>>>>>>>>>>>>> geoffs...@gmail.com wrote: >>>>>>>>>>>>>> Awesome! This is sort of what I suspected that most use cases, >>>>>>>>>>>>>> NULL is a problem. I can just hard code the entire Davis loop >>>>>>>>>>>>>> which will work for my needs. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks you, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Geoff >>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Wednesday, November 25, 2020 at 6:45:44 AM UTC-8 >>>>>>>>>>>>>>> jo...@johnkline.com wrote: >>>>>>>>>>>>>>> In the general case, including keys in the loop packet for >>>>>>>>>>>>>>> non-existent data is not a good idea. This would break >>>>>>>>>>>>>>> existing code (e.g., JavaScript code I use in my skins). >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> You could easily fork the extension and add in what you need. >>>>>>>>>>>>>>> At line 736, right before write_packet_to_file is called, >>>>>>>>>>>>>>> simply check for the keys you need to exist, and add them if >>>>>>>>>>>>>>> they are not there. The following should work. Just replace >>>>>>>>>>>>>>> the keys I’ve listed with the ones you need in the packet. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> must_have_keys = [ 'current.outTemp', 'current.outHumidity' ] >>>>>>>>>>>>>>> for must_have_key in must_have_keys: >>>>>>>>>>>>>>> if must_have_key not in loopdata_pkt: >>>>>>>>>>>>>>> loopdata_pkt[must_have_key] = None >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> If you don’t want to hard code the keys, you’ll have a bigger >>>>>>>>>>>>>>> task; but you could just copy the code used to process the >>>>>>>>>>>>>>> ‘fields’ entry in the LoopData section of weewx.conf. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Cheers, >>>>>>>>>>>>>>> John >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Nov 24, 2020, at 8:54 PM, geoffs...@gmail.com >>>>>>>>>>>>>>>>> <geoffs...@gmail.com> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hi John, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> This is a great extension. I'm wondering if there is a way to >>>>>>>>>>>>>>>> be able to include sending data that is null or none for a >>>>>>>>>>>>>>>> particular key? I'm using a davis vantage pro2, weewx 4.2. I'd >>>>>>>>>>>>>>>> like to use this to make a JSON output that can be ingested >>>>>>>>>>>>>>>> into a home automation system. So far it works great as long >>>>>>>>>>>>>>>> as the data is available to be sent, but I have not figured >>>>>>>>>>>>>>>> out how to send a key with a Null or none value. It looks like >>>>>>>>>>>>>>>> a key with a null or none value gets cleaved off the JSON >>>>>>>>>>>>>>>> output. If a battery dies on a sensor and it just disappears >>>>>>>>>>>>>>>> from the JSON output, that is much harder for the HA system to >>>>>>>>>>>>>>>> handle than a null, none or zero value. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Monday, November 16, 2020 at 2:57:13 PM UTC-8 >>>>>>>>>>>>>>>>> jo...@johnkline.com wrote: >>>>>>>>>>>>>>>>> A fix is released (v2.7.2). There is no hurry to install the >>>>>>>>>>>>>>>>> new release; but once you’ve installed it, you can remove the >>>>>>>>>>>>>>>>> field I asked you to add to weewx.conf. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Nov 16, 2020, at 9:04 AM, Geni <eugen.a...@gmail.com> >>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Ok, works >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Thank you >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> jo...@johnkline.com schrieb am Montag, 16. November 2020 um >>>>>>>>>>>>>>>>>> 16:05:21 UTC+1: >>>>>>>>>>>>>>>>>>> I can duplicate this problem and will issue a fix. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> In the meantime, you can add: >>>>>>>>>>>>>>>>>>> rainyear.outTemp.max >>>>>>>>>>>>>>>>>>> to the fields clause in the LoopData section of weewx.conf? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> That will stop this problem. If you get similar errors for >>>>>>>>>>>>>>>>>>> other periods where you have no fields listed, you’ll have >>>>>>>>>>>>>>>>>>> to temporarily add a field for those periods also. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I should have a fix shortly. I don’t know that this is >>>>>>>>>>>>>>>>>>> related to WeeWX 4.2, not that that really matters. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Nov 16, 2020, at 2:45 AM, Geni <eugen.a...@gmail.com> >>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Hi john >>>>>>>>>>>>>>>>>>>> since weewx 4.2.0 the loop-data.txt is no longer generated? >>>>>>>>>>>>>>>>>>>> regards Geni >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>>>>> the Google Groups "weewx-user" group. >>>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>>>> from it, send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/3f89791f-c06b-43d1-beac-0afa58df59d6n%40googlegroups.com. >>>>>>>>>>>>>>>>>>>> <syslog.txt> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>> from it, send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/0f6cb227-1cdd-4fbb-9cf9-6f4c59521262n%40googlegroups.com. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>>>> it, send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/0611c189-0c9f-4ab6-b6be-4d797e80bb96n%40googlegroups.com. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>>> >>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/e17127d4-1177-4b34-b624-78d34bc53501n%40googlegroups.com. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>>>> Groups "weewx-user" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>>>> >>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/ccc44653-7ba9-467e-b9dc-565b5aff3d02n%40googlegroups.com. >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>> >>>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/daf9779f-97b6-4e14-9d63-c2e11c9c96b7n%40googlegroups.com. >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>>> an email to weewx-user+...@googlegroups.com. >>>>>> >>>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/4ae26782-d0fe-4533-a08c-67a957ba496fn%40googlegroups.com. >>>>> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to weewx-user+...@googlegroups.com. >>>> >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/be15c12f-b2b7-4d26-80a2-716c25b827d3n%40googlegroups.com. >>>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to weewx-user+...@googlegroups.com. >> >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/a93e4451-6c47-4128-8bde-bdfdd9b67b91n%40googlegroups.com. > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/285d08ac-17b8-4b15-8489-42fe358a0065n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/82408B10-B0F1-4C11-A906-68D898A74AB5%40johnkline.com.
