> but data refresh every 5 minutes, with the rest skins of weewx Exactly what data are you talking about that refreshes every five minutes?
> On Jan 26, 2021, at 6:02 AM, Δημήτρης Βήχος <hobbyline...@gmail.com> wrote: > > i was easily installed the loop-data extension yesterday. i use weewx 4.3 > with wh1080 weather station, but data refresh every 5 minutes, with the rest > skins of weewx > > Στις Πέμπτη, 26 Νοεμβρίου 2020 στις 6:46:10 μ.μ. UTC+2, ο χρήστης > jo...@johnkline.com έγραψε: >> Thanks for letting me know. >> >>>> On Nov 26, 2020, at 7:32 AM, geoffs...@gmail.com <geoffs...@gmail.com> >>>> wrote: >>>> >>> Hi John, >>> >>> Works great. Here is what I added to the loop-data.py >>> >>> Line 735 self.ten_min_packets, self.cfg.ten_min_obstypes) >>> # Added to allow specific null keys if no data available in >>> loop packet >>> must_have_keys = [ 'current.dateTime', >>> 'current.extraTemp1.raw', 'current.extraTemp2.raw', >>> 'current.extraTemp3.raw', 'current.extraHumid1.raw', >>> 'current.extraHumid2.raw', 'current.extraHumid3.raw' ] >>> for must_have_key in must_have_keys: >>> if must_have_key not in loopdata_pkt: >>> loopdata_pkt[must_have_key] = None >>> >>> Thanks! >>>> On Wednesday, November 25, 2020 at 7:06:46 AM UTC-8 geoffs...@gmail.com >>>> wrote: >>>> Awesome! This is sort of what I suspected that most use cases, NULL is a >>>> problem. I can just hard code the entire Davis loop which will work for my >>>> needs. >>>> >>>> Thanks you, >>>> >>>> Geoff >>>> >>>>> On Wednesday, November 25, 2020 at 6:45:44 AM UTC-8 jo...@johnkline.com >>>>> wrote: >>>>> In the general case, including keys in the loop packet for non-existent >>>>> data is not a good idea. This would break existing code (e.g., >>>>> JavaScript code I use in my skins). >>>>> >>>>> You could easily fork the extension and add in what you need. At line >>>>> 736, right before write_packet_to_file is called, simply check for the >>>>> keys you need to exist, and add them if they are not there. The following >>>>> should work. Just replace the keys I’ve listed with the ones you need in >>>>> the packet. >>>>> >>>>> must_have_keys = [ 'current.outTemp', 'current.outHumidity' ] >>>>> for must_have_key in must_have_keys: >>>>> if must_have_key not in loopdata_pkt: >>>>> loopdata_pkt[must_have_key] = None >>>>> >>>>> If you don’t want to hard code the keys, you’ll have a bigger task; but >>>>> you could just copy the code used to process the ‘fields’ entry in the >>>>> LoopData section of weewx.conf. >>>>> >>>>> Cheers, >>>>> John >>>>> >>>>>>> On Nov 24, 2020, at 8:54 PM, geoffs...@gmail.com <geoffs...@gmail.com> >>>>>>> wrote: >>>>>>> >>>>>> Hi John, >>>>> >>>>>> >>>>>> This is a great extension. I'm wondering if there is a way to be able to >>>>>> include sending data that is null or none for a particular key? I'm >>>>>> using a davis vantage pro2, weewx 4.2. I'd like to use this to make a >>>>>> JSON output that can be ingested into a home automation system. So far >>>>>> it works great as long as the data is available to be sent, but I have >>>>>> not figured out how to send a key with a Null or none value. It looks >>>>>> like a key with a null or none value gets cleaved off the JSON output. >>>>>> If a battery dies on a sensor and it just disappears from the JSON >>>>>> output, that is much harder for the HA system to handle than a null, >>>>>> none or zero value. >>>>>> >>>>>>> On Monday, November 16, 2020 at 2:57:13 PM UTC-8 jo...@johnkline.com >>>>>>> wrote: >>>>>>> A fix is released (v2.7.2). There is no hurry to install the new >>>>>>> release; but once you’ve installed it, you can remove the field I asked >>>>>>> you to add to weewx.conf. >>>>>>> >>>>>>>> On Nov 16, 2020, at 9:04 AM, Geni <eugen.a...@gmail.com> wrote: >>>>>>>> >>>>>>>> Ok, works >>>>>>> >>>>>>>> >>>>>>>> Thank you >>>>>>>> >>>>>>>> jo...@johnkline.com schrieb am Montag, 16. November 2020 um 16:05:21 >>>>>>>> UTC+1: >>>>>>>>> I can duplicate this problem and will issue a fix. >>>>>>>>> >>>>>>>>> In the meantime, you can add: >>>>>>>>> rainyear.outTemp.max >>>>>>>>> to the fields clause in the LoopData section of weewx.conf? >>>>>>>>> >>>>>>>>> That will stop this problem. If you get similar errors for other >>>>>>>>> periods where you have no fields listed, you’ll have to temporarily >>>>>>>>> add a field for those periods also. >>>>>>>>> >>>>>>>>> I should have a fix shortly. I don’t know that this is related to >>>>>>>>> WeeWX 4.2, not that that really matters. >>>>>>>>> >>>>>>>>>>> On Nov 16, 2020, at 2:45 AM, Geni <eugen.a...@gmail.com> wrote: >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>>> Hi john >>>>>>>>>> since weewx 4.2.0 the loop-data.txt is no longer generated? >>>>>>>>>> regards Geni >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>>> Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/3f89791f-c06b-43d1-beac-0afa58df59d6n%40googlegroups.com. >>>>>>>>>> <syslog.txt> >>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "weewx-user" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>>>> an email to weewx-user+...@googlegroups.com. >>>>>>> >>>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/weewx-user/0f6cb227-1cdd-4fbb-9cf9-6f4c59521262n%40googlegroups.com. >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>> an email to weewx-user+...@googlegroups.com. >>>>> >>>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/weewx-user/0611c189-0c9f-4ab6-b6be-4d797e80bb96n%40googlegroups.com. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to weewx-user+...@googlegroups.com. >> >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/e17127d4-1177-4b34-b624-78d34bc53501n%40googlegroups.com. > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/ccc44653-7ba9-467e-b9dc-565b5aff3d02n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/E218AC03-927C-45DC-9400-C2C75B3E3F74%40johnkline.com.