Not using serial...using USB. On Friday, 5 March 2021 at 10:34:32 UTC+13 monmul wrote:
> pi@WeatherPi:~ $ lsusb > Bus 001 Device 006: ID 0403:6001 Future Technology Devices International, > Ltd FT232 Serial (UART) IC > Bus 001 Device 005: ID 13fe:4100 Kingston Technology Company Inc. Flash > drive > Bus 001 Device 004: ID 1a40:0101 Terminus Technology Inc. Hub > Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 > Fast Ethernet Adapter > Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > pi@WeatherPi:~ $ > > > On Friday, 5 March 2021 at 09:05:34 UTC+13 tke...@gmail.com wrote: > >> Well, if you're sure you have the right port (/dev/ttyUSB0), and you have >> correctly completed the test (a couple of enters, followed by ENTER, all >> caps) and you got nothing back, then that is as definitive a test that I >> know of that you have a connectivity problem. >> >> Do you have a USB version of the logger? Or, if you have a serial >> version, are you using a serial-to-usb converter? Either way, make sure >> your computer is recognizing the USB connection to the logger: >> >> *lsusb* >> >> If you have a serial version of the logger (very rare these days), then >> what serial port are you plugging it into? >> >> >> >> On Thu, Mar 4, 2021 at 11:59 AM monmul <dunb...@gmail.com> wrote: >> >>> Yes, apologies....was in a rush typing and did not review....."new >>> envoy"......it should be...and "initiation" is the other typo! >>> >>> On Friday, 5 March 2021 at 08:33:36 UTC+13 gjr80 wrote: >>> >>>> ‘new’ envoy? >>>> >>>> Gary >>>> >>>> On Friday, 5 March 2021 at 01:39:10 UTC+10 tke...@gmail.com wrote: >>>> >>>>> What do you mean by "net Envoy"? If you are using a serial port like >>>>> /dev/ttyUSB0, the logger should be plugged in via a USB connector, not a >>>>> network connector. Or, are you using an IP logger? >>>>> >>>>> On Wed, Mar 3, 2021 at 8:38 PM monmul <dunb...@gmail.com> wrote: >>>>> >>>>>> I have not had time to do the reseating yet....hopefully later today. >>>>>> One thing strikes me (probably becuase it has been so long since I set >>>>>> it >>>>>> up) I just switched envoys, how does the net envoy know what to do...I >>>>>> have >>>>>> not gone to any itiation or set up page etc....I just plugged and >>>>>> supposed >>>>>> it would go. Am I missing something? >>>>>> >>>>>> On Sunday, 28 February 2021 at 19:42:44 UTC+13 monmul wrote: >>>>>> >>>>>>> Thank you, I will give that a try! >>>>>>> >>>>>>> On Sunday, 28 February 2021 at 19:31:21 UTC+13 gjr80 wrote: >>>>>>> >>>>>>>> Reseat means to remove the logger from the Envoy and then reinstall >>>>>>>> the logger in the Envoy. Sometimes you can get a dodgy connection >>>>>>>> between >>>>>>>> pins on the logger and the socket in the Envoy (or console) and >>>>>>>> remaking >>>>>>>> the connection by reseating can sometimes fix this. >>>>>>>> >>>>>>>> Gary >>>>>>>> >>>>>>>> On Sunday, 28 February 2021 at 12:53:17 UTC+10 monmul wrote: >>>>>>>> >>>>>>>>> Sorry, I don't quite understand what you mean by "reseat"? >>>>>>>>> >>>>>>>>> On Sunday, 28 February 2021 at 14:40:11 UTC+13 tke...@gmail.com >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> You can try reseating the logger. >>>>>>>>>> >>>>>>>>>> On Sat, Feb 27, 2021 at 5:16 PM monmul <dunb...@gmail.com> wrote: >>>>>>>>>> >>>>>>>>>>> Neither TEST nor NVER returns anything....so, I guess I have a >>>>>>>>>>> connectivity problem....which seems strange as I did a straight >>>>>>>>>>> swap out >>>>>>>>>>> of the Envoys! >>>>>>>>>>> >>>>>>>>>>> On Sunday, 28 February 2021 at 13:33:34 UTC+13 tke...@gmail.com >>>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>>> If the cursor went down the screen, then the console is sending >>>>>>>>>>>> something back. Make sure you press <enter> a few times, then >>>>>>>>>>>> "TEST", all >>>>>>>>>>>> in capital letters. >>>>>>>>>>>> >>>>>>>>>>>> You can also type "NVER". Again, all in capital letters. This >>>>>>>>>>>> will return the firmware version number. >>>>>>>>>>>> >>>>>>>>>>>> If neither of those work, then you have a connectivity problem. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Sat, Feb 27, 2021 at 3:54 PM monmul <dunb...@gmail.com> >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> The screen shows blank when I get to the point above.....after >>>>>>>>>>>>> hitting enter a few times, it just sends the cursor down the >>>>>>>>>>>>> screen......I >>>>>>>>>>>>> tried typing TEST but no response...just a dark screen in the CL >>>>>>>>>>>>> window. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Sunday, 28 February 2021 at 11:49:11 UTC+13 gjr80 wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> That’s a better start, did you hit enter a few times and then >>>>>>>>>>>>>> send TEST as per the wiki article >>>>>>>>>>>>>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#establishing-connectivity>? >>>>>>>>>>>>>> >>>>>>>>>>>>>> You should get a response from the Envoy. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Gary >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Sunday, 28 February 2021 at 08:04:10 UTC+10 monmul wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 >>>>>>>>>>>>>>> minicom: cannot open /dev/ttyUSB0: Device or resource busy >>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo killall screen >>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>>>>>>>>> /run/user/1000/gvfs >>>>>>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>>>>>> pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Welcome to minicom 2.7 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> OPTIONS: I18n >>>>>>>>>>>>>>> Compiled on Apr 22 2017, 09:14:19. >>>>>>>>>>>>>>> Port /dev/ttyUSB0, 11:00:42 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Press CTRL-A Z for help on special keys >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Saturday, 27 February 2021 at 02:19:42 UTC+13 >>>>>>>>>>>>>>> tke...@gmail.com wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Monmul, we have not definitively heard whether or not you >>>>>>>>>>>>>>>> are able to do the test listed under *Establishing >>>>>>>>>>>>>>>> connectivity >>>>>>>>>>>>>>>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#establishing-connectivity>* >>>>>>>>>>>>>>>> in >>>>>>>>>>>>>>>> the Wiki.That is an essential first step. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Use either screen or minicom. You may have to preface the >>>>>>>>>>>>>>>> command with 'sudo'. For example, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> *sudo screen /dev/ttyUSB0 19200* >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -tk >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Thu, Feb 25, 2021 at 7:34 PM monmul <dunb...@gmail.com> >>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Feb 26 16:31:31 WeatherPi systemd[1]: Starting LSB: weewx >>>>>>>>>>>>>>>>> weather system... >>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: >>>>>>>>>>>>>>>>> Initializing weewx version 4.4.0 >>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: >>>>>>>>>>>>>>>>> Using Python 2.7.13 (default, Aug 22 2020, 10:03:02) #012[GCC >>>>>>>>>>>>>>>>> 6.3.0 >>>>>>>>>>>>>>>>> 20170516] >>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: >>>>>>>>>>>>>>>>> Platform Linux-4.19.66-v7+-armv7l-with-debian-9.13 >>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: >>>>>>>>>>>>>>>>> Locale is 'en_NZ.UTF-8' >>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: PID >>>>>>>>>>>>>>>>> file is /var/run/weewx.pid >>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17954]: Starting weewx >>>>>>>>>>>>>>>>> weather system: weewx. >>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi systemd[1]: Started LSB: weewx >>>>>>>>>>>>>>>>> weather system. >>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO __main__: >>>>>>>>>>>>>>>>> Using configuration file /etc/weewx/weewx.conf >>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO __main__: >>>>>>>>>>>>>>>>> Debug is 1 >>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG __main__: >>>>>>>>>>>>>>>>> Initializing engine >>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO weewx.engine: >>>>>>>>>>>>>>>>> Loading station type Vantage (weewx.drivers.vantage) >>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>>>> weewx.drivers.vantage: Driver version is 3.2.1 >>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>>>> weewx.drivers.vantage: Option loop_request=1 >>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>>>> weewx.drivers.vantage: Opened up serial port /dev/ttyUSB0; >>>>>>>>>>>>>>>>> baud 19200; >>>>>>>>>>>>>>>>> timeout 4.00 >>>>>>>>>>>>>>>>> Feb 26 16:31:36 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>>>>> Feb 26 16:31:36 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>>>>>> Feb 26 16:31:36 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>>>> weewx.drivers.vantage: Retry #0 failed >>>>>>>>>>>>>>>>> Feb 26 16:31:40 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>>>> weewx.drivers.vantage: Retry #1 failed >>>>>>>>>>>>>>>>> Feb 26 16:31:44 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>>>> weewx.drivers.vantage: Retry #2 failed >>>>>>>>>>>>>>>>> Feb 26 16:31:45 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>>>>> Feb 26 16:31:45 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>>>> weewx.drivers.vantage: Retry #3 failed >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] ERROR >>>>>>>>>>>>>>>>> weewx.drivers.vantage: Unable to wake up console >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] ERROR weewx.engine: >>>>>>>>>>>>>>>>> Import of driver failed: Unable to wake up Vantage console >>>>>>>>>>>>>>>>> (<class >>>>>>>>>>>>>>>>> 'weewx.WakeupError'>) >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>> weewx.engine: **** Traceback (most recent call last): >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>>>>> "/usr/share/weewx/weewx/engine.py", line >>>>>>>>>>>>>>>>> 119, in setupStation >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>> weewx.engine: **** self.console = >>>>>>>>>>>>>>>>> loader_function(config_dict, >>>>>>>>>>>>>>>>> self) >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>>>>> line 39, in loader >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>> weewx.engine: **** return VantageService(engine, >>>>>>>>>>>>>>>>> config_dict) >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>>>>> line 1898, in __init__ >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>> weewx.engine: **** Vantage.__init__(self, >>>>>>>>>>>>>>>>> **config_dict[DRIVER_NAME]) >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>>>>> line 515, in __init__ >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>> weewx.engine: **** self._setup() >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>>>>> line 1317, in _setup >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>> weewx.engine: **** >>>>>>>>>>>>>>>>> self.port.wakeup_console(max_tries=self.max_tries) >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>>>>> line 118, in wakeup_console >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>> weewx.engine: **** raise weewx.WakeupError("Unable >>>>>>>>>>>>>>>>> to wake up >>>>>>>>>>>>>>>>> Vantage console") >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>> weewx.engine: **** WakeupError: Unable to wake up >>>>>>>>>>>>>>>>> Vantage console >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL __main__: >>>>>>>>>>>>>>>>> Unable to load driver: Unable to wake up Vantage console >>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL __main__: >>>>>>>>>>>>>>>>> **** Exiting... >>>>>>>>>>>>>>>>> Feb 26 16:31:50 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>>>>> Feb 26 16:31:50 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>>>>>> Feb 26 16:31:58 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>>>>> Feb 26 16:31:58 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>>>>>> Feb 26 16:32:07 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>>>>> Feb 26 16:32:07 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>>>>>> Feb 26 16:32:15 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>>>>> Feb 26 16:32:15 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Friday, 26 February 2021 at 11:19:41 UTC+13 vince wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> So go ahead and restart it now. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Thursday, February 25, 2021 at 1:02:41 PM UTC-8 monmul >>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo killall screen >>>>>>>>>>>>>>>>>>> screen: no process found >>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>>>>>>>>>>>>> /run/user/1000/gvfs >>>>>>>>>>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ ps -ef | grep -e weewxd -e screen >>>>>>>>>>>>>>>>>>> pi 3809 11222 0 10:01 pts/1 00:00:00 grep >>>>>>>>>>>>>>>>>>> --color=auto -e weewxd -e screen >>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 21:57:53 UTC+13 >>>>>>>>>>>>>>>>>>> graha...@gmail.com wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> vnc makes no relevant difference. >>>>>>>>>>>>>>>>>>>> command = ‘screen’ below shows program ‘screen’ has a >>>>>>>>>>>>>>>>>>>> ‘pi’ user process open on /dev/ttyUSB0 at the moment. not >>>>>>>>>>>>>>>>>>>> weewxd. probably >>>>>>>>>>>>>>>>>>>> left over from earlier troubleshooting. >>>>>>>>>>>>>>>>>>>> kill it with “sudo killall screen”. >>>>>>>>>>>>>>>>>>>> check if any weewxd’s or screen’s hanging around with >>>>>>>>>>>>>>>>>>>> “ps -ef | grep -e weewxd -e screen”. kill them if you find >>>>>>>>>>>>>>>>>>>> any. >>>>>>>>>>>>>>>>>>>> you should now be back to a clean state with >>>>>>>>>>>>>>>>>>>> /devttyUSB0 ready for opening. do “sudo lsof /dev/ttyUSB0” >>>>>>>>>>>>>>>>>>>> to be sure >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On 25 Feb 2021, at 5:24 pm, gjr80 <gjrod...@gmail.com> >>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I don't know, I'm a SSH only person, I am getting out >>>>>>>>>>>>>>>>>>>> of my depth now. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Gary >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 16:21:11 UTC+10 monmul >>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I am using VNC Viewer (and always have) rather than >>>>>>>>>>>>>>>>>>>>> SSH....not sure if that makes any difference? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 19:13:29 UTC+13 gjr80 >>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Hmm, different to my Davis on my RPi which shows >>>>>>>>>>>>>>>>>>>>>> weewxd rather than screen. I will have to defer to Tom >>>>>>>>>>>>>>>>>>>>>> or someone who knows >>>>>>>>>>>>>>>>>>>>>> about screen. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Gary >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 15:58:07 UTC+10 >>>>>>>>>>>>>>>>>>>>>> monmul wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>>>>>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>>>>>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file >>>>>>>>>>>>>>>>>>>>>>> system /run/user/1000/gvfs >>>>>>>>>>>>>>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>>>>>>>>>>>>>> COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE >>>>>>>>>>>>>>>>>>>>>>> NAME >>>>>>>>>>>>>>>>>>>>>>> screen 16582 pi 6u CHR 188,0 0t0 20196 >>>>>>>>>>>>>>>>>>>>>>> /dev/ttyUSB0 >>>>>>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>> the Google Groups "weewx-user" group. >>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>> from it, send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/73f28622-be3d-4e50-b6fa-644811a22b2bn%40googlegroups.com >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/73f28622-be3d-4e50-b6fa-644811a22b2bn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>> it, send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>>>> >>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/2c9f4cbf-dfb1-479e-ba2a-8220395d01can%40googlegroups.com >>>>>>>>>>>>> >>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/2c9f4cbf-dfb1-479e-ba2a-8220395d01can%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>> . >>>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>> >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/6782a2fa-7d0a-40ab-ac17-f3ed2890d018n%40googlegroups.com >>>>>>>>>>> >>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/6782a2fa-7d0a-40ab-ac17-f3ed2890d018n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>> . >>>>>>>>>>> >>>>>>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>> >>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/weewx-user/e95e4c56-9997-4106-b8b9-4256b3b64219n%40googlegroups.com >>>>>> >>>>>> <https://groups.google.com/d/msgid/weewx-user/e95e4c56-9997-4106-b8b9-4256b3b64219n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to weewx-user+...@googlegroups.com. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/65d07904-ffac-4481-b934-c0574bb09c24n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/weewx-user/65d07904-ffac-4481-b934-c0574bb09c24n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/e3682325-ba57-4be0-b403-2e25accd854dn%40googlegroups.com.