Thank you, I will give that a try! On Sunday, 28 February 2021 at 19:31:21 UTC+13 gjr80 wrote:
> Reseat means to remove the logger from the Envoy and then reinstall the > logger in the Envoy. Sometimes you can get a dodgy connection between pins > on the logger and the socket in the Envoy (or console) and remaking the > connection by reseating can sometimes fix this. > > Gary > > On Sunday, 28 February 2021 at 12:53:17 UTC+10 monmul wrote: > >> Sorry, I don't quite understand what you mean by "reseat"? >> >> On Sunday, 28 February 2021 at 14:40:11 UTC+13 tke...@gmail.com wrote: >> >>> You can try reseating the logger. >>> >>> On Sat, Feb 27, 2021 at 5:16 PM monmul <dunb...@gmail.com> wrote: >>> >>>> Neither TEST nor NVER returns anything....so, I guess I have a >>>> connectivity problem....which seems strange as I did a straight swap out >>>> of the Envoys! >>>> >>>> On Sunday, 28 February 2021 at 13:33:34 UTC+13 tke...@gmail.com wrote: >>>> >>>>> If the cursor went down the screen, then the console is sending >>>>> something back. Make sure you press <enter> a few times, then "TEST", all >>>>> in capital letters. >>>>> >>>>> You can also type "NVER". Again, all in capital letters. This will >>>>> return the firmware version number. >>>>> >>>>> If neither of those work, then you have a connectivity problem. >>>>> >>>>> >>>>> On Sat, Feb 27, 2021 at 3:54 PM monmul <dunb...@gmail.com> wrote: >>>>> >>>>>> The screen shows blank when I get to the point above.....after >>>>>> hitting enter a few times, it just sends the cursor down the >>>>>> screen......I >>>>>> tried typing TEST but no response...just a dark screen in the CL window. >>>>>> >>>>>> >>>>>> On Sunday, 28 February 2021 at 11:49:11 UTC+13 gjr80 wrote: >>>>>> >>>>>>> That’s a better start, did you hit enter a few times and then send >>>>>>> TEST as per the wiki article >>>>>>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#establishing-connectivity>? >>>>>>> >>>>>>> You should get a response from the Envoy. >>>>>>> >>>>>>> Gary >>>>>>> >>>>>>> On Sunday, 28 February 2021 at 08:04:10 UTC+10 monmul wrote: >>>>>>> >>>>>>>> pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 >>>>>>>> minicom: cannot open /dev/ttyUSB0: Device or resource busy >>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>> pi@WeatherPi:~ $ sudo killall screen >>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>> /run/user/1000/gvfs >>>>>>>> Output information may be incomplete. >>>>>>>> pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 >>>>>>>> >>>>>>>> >>>>>>>> Welcome to minicom 2.7 >>>>>>>> >>>>>>>> OPTIONS: I18n >>>>>>>> Compiled on Apr 22 2017, 09:14:19. >>>>>>>> Port /dev/ttyUSB0, 11:00:42 >>>>>>>> >>>>>>>> Press CTRL-A Z for help on special keys >>>>>>>> >>>>>>>> >>>>>>>> On Saturday, 27 February 2021 at 02:19:42 UTC+13 tke...@gmail.com >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Monmul, we have not definitively heard whether or not you are able >>>>>>>>> to do the test listed under *Establishing connectivity >>>>>>>>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#establishing-connectivity>* >>>>>>>>> in >>>>>>>>> the Wiki.That is an essential first step. >>>>>>>>> >>>>>>>>> Use either screen or minicom. You may have to preface the command >>>>>>>>> with 'sudo'. For example, >>>>>>>>> >>>>>>>>> >>>>>>>>> *sudo screen /dev/ttyUSB0 19200* >>>>>>>>> >>>>>>>>> -tk >>>>>>>>> >>>>>>>>> On Thu, Feb 25, 2021 at 7:34 PM monmul <dunb...@gmail.com> wrote: >>>>>>>>> >>>>>>>>>> Feb 26 16:31:31 WeatherPi systemd[1]: Starting LSB: weewx weather >>>>>>>>>> system... >>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: >>>>>>>>>> Initializing weewx version 4.4.0 >>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Using >>>>>>>>>> Python 2.7.13 (default, Aug 22 2020, 10:03:02) #012[GCC 6.3.0 >>>>>>>>>> 20170516] >>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Platform >>>>>>>>>> Linux-4.19.66-v7+-armv7l-with-debian-9.13 >>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Locale is >>>>>>>>>> 'en_NZ.UTF-8' >>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: PID file is >>>>>>>>>> /var/run/weewx.pid >>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17954]: Starting weewx weather >>>>>>>>>> system: weewx. >>>>>>>>>> Feb 26 16:31:32 WeatherPi systemd[1]: Started LSB: weewx weather >>>>>>>>>> system. >>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO __main__: Using >>>>>>>>>> configuration file /etc/weewx/weewx.conf >>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO __main__: Debug is 1 >>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG __main__: >>>>>>>>>> Initializing engine >>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO weewx.engine: Loading >>>>>>>>>> station type Vantage (weewx.drivers.vantage) >>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG >>>>>>>>>> weewx.drivers.vantage: Driver version is 3.2.1 >>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG >>>>>>>>>> weewx.drivers.vantage: Option loop_request=1 >>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG >>>>>>>>>> weewx.drivers.vantage: Opened up serial port /dev/ttyUSB0; baud >>>>>>>>>> 19200; >>>>>>>>>> timeout 4.00 >>>>>>>>>> Feb 26 16:31:36 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>> Feb 26 16:31:36 WeatherPi dhcpcd[372]: wlan0: soliciting a DHCPv6 >>>>>>>>>> lease >>>>>>>>>> Feb 26 16:31:36 WeatherPi weewx[17971] DEBUG >>>>>>>>>> weewx.drivers.vantage: Retry #0 failed >>>>>>>>>> Feb 26 16:31:40 WeatherPi weewx[17971] DEBUG >>>>>>>>>> weewx.drivers.vantage: Retry #1 failed >>>>>>>>>> Feb 26 16:31:44 WeatherPi weewx[17971] DEBUG >>>>>>>>>> weewx.drivers.vantage: Retry #2 failed >>>>>>>>>> Feb 26 16:31:45 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>> Feb 26 16:31:45 WeatherPi dhcpcd[372]: wlan0: soliciting a DHCPv6 >>>>>>>>>> lease >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] DEBUG >>>>>>>>>> weewx.drivers.vantage: Retry #3 failed >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] ERROR >>>>>>>>>> weewx.drivers.vantage: Unable to wake up console >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] ERROR weewx.engine: Import >>>>>>>>>> of driver failed: Unable to wake up Vantage console (<class >>>>>>>>>> 'weewx.WakeupError'>) >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>> **** Traceback (most recent call last): >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>> **** File "/usr/share/weewx/weewx/engine.py", line 119, in >>>>>>>>>> setupStation >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>> **** self.console = loader_function(config_dict, self) >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 39, >>>>>>>>>> in >>>>>>>>>> loader >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>> **** return VantageService(engine, config_dict) >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line >>>>>>>>>> 1898, in >>>>>>>>>> __init__ >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>> **** Vantage.__init__(self, **config_dict[DRIVER_NAME]) >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 515, >>>>>>>>>> in >>>>>>>>>> __init__ >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>> **** self._setup() >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line >>>>>>>>>> 1317, in >>>>>>>>>> _setup >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>> **** self.port.wakeup_console(max_tries=self.max_tries) >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 118, >>>>>>>>>> in >>>>>>>>>> wakeup_console >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>> **** raise weewx.WakeupError("Unable to wake up Vantage >>>>>>>>>> console") >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>> **** WakeupError: Unable to wake up Vantage console >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL __main__: Unable >>>>>>>>>> to load driver: Unable to wake up Vantage console >>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL __main__: >>>>>>>>>> **** Exiting... >>>>>>>>>> Feb 26 16:31:50 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>> Feb 26 16:31:50 WeatherPi dhcpcd[372]: wlan0: soliciting a DHCPv6 >>>>>>>>>> lease >>>>>>>>>> Feb 26 16:31:58 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>> Feb 26 16:31:58 WeatherPi dhcpcd[372]: wlan0: soliciting a DHCPv6 >>>>>>>>>> lease >>>>>>>>>> Feb 26 16:32:07 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>> Feb 26 16:32:07 WeatherPi dhcpcd[372]: wlan0: soliciting a DHCPv6 >>>>>>>>>> lease >>>>>>>>>> Feb 26 16:32:15 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>> Feb 26 16:32:15 WeatherPi dhcpcd[372]: wlan0: soliciting a DHCPv6 >>>>>>>>>> lease >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Friday, 26 February 2021 at 11:19:41 UTC+13 vince wrote: >>>>>>>>>> >>>>>>>>>>> So go ahead and restart it now. >>>>>>>>>>> >>>>>>>>>>> On Thursday, February 25, 2021 at 1:02:41 PM UTC-8 monmul wrote: >>>>>>>>>>> >>>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>>>> pi@WeatherPi:~ $ sudo killall screen >>>>>>>>>>>> screen: no process found >>>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>>>>>> /run/user/1000/gvfs >>>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>>> pi@WeatherPi:~ $ ps -ef | grep -e weewxd -e screen >>>>>>>>>>>> pi 3809 11222 0 10:01 pts/1 00:00:00 grep >>>>>>>>>>>> --color=auto -e weewxd -e screen >>>>>>>>>>>> pi@WeatherPi:~ $ >>>>>>>>>>>> >>>>>>>>>>>> On Thursday, 25 February 2021 at 21:57:53 UTC+13 >>>>>>>>>>>> graha...@gmail.com wrote: >>>>>>>>>>>> >>>>>>>>>>>>> vnc makes no relevant difference. >>>>>>>>>>>>> command = ‘screen’ below shows program ‘screen’ has a ‘pi’ >>>>>>>>>>>>> user process open on /dev/ttyUSB0 at the moment. not weewxd. >>>>>>>>>>>>> probably left >>>>>>>>>>>>> over from earlier troubleshooting. >>>>>>>>>>>>> kill it with “sudo killall screen”. >>>>>>>>>>>>> check if any weewxd’s or screen’s hanging around with “ps -ef >>>>>>>>>>>>> | grep -e weewxd -e screen”. kill them if you find any. >>>>>>>>>>>>> you should now be back to a clean state with /devttyUSB0 ready >>>>>>>>>>>>> for opening. do “sudo lsof /dev/ttyUSB0” to be sure >>>>>>>>>>>>> >>>>>>>>>>>>> On 25 Feb 2021, at 5:24 pm, gjr80 <gjrod...@gmail.com> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> I don't know, I'm a SSH only person, I am getting out of my >>>>>>>>>>>>> depth now. >>>>>>>>>>>>> >>>>>>>>>>>>> Gary >>>>>>>>>>>>> >>>>>>>>>>>>> On Thursday, 25 February 2021 at 16:21:11 UTC+10 monmul wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> I am using VNC Viewer (and always have) rather than >>>>>>>>>>>>>> SSH....not sure if that makes any difference? >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Thursday, 25 February 2021 at 19:13:29 UTC+13 gjr80 wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hmm, different to my Davis on my RPi which shows weewxd >>>>>>>>>>>>>>> rather than screen. I will have to defer to Tom or someone who >>>>>>>>>>>>>>> knows about >>>>>>>>>>>>>>> screen. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Gary >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 15:58:07 UTC+10 monmul >>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>>>>>>>>>> /run/user/1000/gvfs >>>>>>>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>>>>>>> COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME >>>>>>>>>>>>>>>> screen 16582 pi 6u CHR 188,0 0t0 20196 >>>>>>>>>>>>>>>> /dev/ttyUSB0 >>>>>>>>>>>>>>>> pi@WeatherPi:~ $ >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>>>> >>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/73f28622-be3d-4e50-b6fa-644811a22b2bn%40googlegroups.com >>>>>>>>>> >>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/73f28622-be3d-4e50-b6fa-644811a22b2bn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>> . >>>>>>>>>> >>>>>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>> >>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/weewx-user/2c9f4cbf-dfb1-479e-ba2a-8220395d01can%40googlegroups.com >>>>>> >>>>>> <https://groups.google.com/d/msgid/weewx-user/2c9f4cbf-dfb1-479e-ba2a-8220395d01can%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to weewx-user+...@googlegroups.com. >>>> >>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/6782a2fa-7d0a-40ab-ac17-f3ed2890d018n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/6782a2fa-7d0a-40ab-ac17-f3ed2890d018n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/08aba22f-2d3a-4628-8b30-59ed00fdcfccn%40googlegroups.com.