I think you're right. The '&CR&' header you are seeing is typical of "Complete Record Mode". You want data logger mode.
On Fri, May 28, 2021 at 8:12 AM valken...@gmail.com <valkenier...@gmail.com> wrote: > I meant both the ultimeter and the server are both at a remote loaction, > and conected by a classical serial cable. They are on Island where in > summer sailing regattas are held. There is a wireless internet link to the > location. So I don't have the setup right here under my hands, but I'm able > to log in by VPN. But off course it's not impossible to get there. I think > the Ultimeter is talking in the wrong mode. > > Op vrijdag 28 mei 2021 om 17:05:51 UTC+2 schreef tke...@gmail.com: > >> Looking at the Peet Bros protocol >> <https://www.peetbros.com/shop/custom.aspx?recid=29>, they say the baud >> rate is 2,400, so you got that right. Make sure it's 8 data bits, 1 stop >> bit, no parity. >> >> Something I'm not understanding: you are using port /dev/ttyS0, which is >> a typical serial port. However, the Ultimeter is at a remote location. How >> does it connect to the port? Perhaps the problem is somewhere in that link? >> >> On Fri, May 28, 2021 at 7:51 AM valken...@gmail.com <valken...@gmail.com> >> wrote: >> >>> Thnx again. I think it must be the right port since there is only 1 >>> serial device connected. If you say the output of ttyS0 is not normal >>> ultimeter output, i assume we found the cause of the disfunctioning. I >>> used baud rate 2400 for the screen command. The output is not readable >>> indeed, but it is a flow of data. Maybe the unit is not in logger mode >>> since teh power outage. Unfornately the station is at a remote location. >>> I'll see if i can get someone up there to check the Ultimeter and the >>> setup. I'll let you know. >>> >>> Op vrijdag 28 mei 2021 om 16:15:07 UTC+2 schreef tke...@gmail.com: >>> >>>> That does not look like the Ultimeter protocol, which typically has >>>> double exclamation points ('!!') every 42, 46, or 50 bytes. Are you sure >>>> you have the baud rate correct? Have the right port? >>>> >>>> On Fri, May 28, 2021 at 6:31 AM valken...@gmail.com < >>>> valken...@gmail.com> wrote: >>>> >>>>> screen /dev/ttyS0 2400 shows me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etcetera >>>>> >>>>> Op vrijdag 28 mei 2021 om 15:08:56 UTC+2 schreef valken...@gmail.com: >>>>> >>>>>> Exactly nothing happens: >>>>>> >>>>>> ****@kwsweerstation:/etc/weewx# weewxd >>>>>> >>>>>> And then the screen stays completely blank...... >>>>>> >>>>>> Op vrijdag 28 mei 2021 om 15:00:08 UTC+2 schreef tke...@gmail.com: >>>>>> >>>>>>> What happens when you run weewxd directly from the console? >>>>>>> >>>>>>> On Fri, May 28, 2021 at 5:54 AM valken...@gmail.com < >>>>>>> valken...@gmail.com> wrote: >>>>>>> >>>>>>>> Dear Tom, >>>>>>>> >>>>>>>> Thank you for your answer. You are right. This is a very short >>>>>>>> interval. I let it run much longer earlier, and nothing else showed up >>>>>>>> in >>>>>>>> the logs. Indeed, I quit weewx by systemctl stop weewx. Then I noticed >>>>>>>> this >>>>>>>> error, an I assumed it might yield an answer. To get a clean piece of >>>>>>>> logs, did a start and stop in a short time. (But that's not helpful I >>>>>>>> understand now.) I did run weewxd (after stopping weewx), but it show >>>>>>>> no >>>>>>>> output whatsoever. Just nothing. Blank. So now data received from >>>>>>>> ttyS0? >>>>>>>> When i start weewx by systemctl. The log gives me the same output. >>>>>>>> The last log entry is: >>>>>>>> kwsweerstation weewx[12255] DEBUG weewx.manager: Daily summary >>>>>>>> version is 4.0 >>>>>>>> >>>>>>>> After that no further entries appear. The rest of the log above >>>>>>>> this entry is exactly similar to the log shown in the openig post. I >>>>>>>> think >>>>>>>> there is some issue with the serial connection, although screen gives >>>>>>>> me >>>>>>>> some encoded output. >>>>>>>> Op vrijdag 28 mei 2021 om 14:30:26 UTC+2 schreef tke...@gmail.com: >>>>>>>> >>>>>>>>> In this log sample, I assume you stopped weewx by doing something >>>>>>>>> like "systemctl stop weewx". If so, the "error in the log" is just the >>>>>>>>> normal shutdown chatter and doesn't mean anything. >>>>>>>>> >>>>>>>>> In this sample, there is only 3 seconds between when weewx had >>>>>>>>> finished initializing, and when the shutdown sequence started. That's >>>>>>>>> not >>>>>>>>> enough time to judge whether weewx was doing anything. >>>>>>>>> >>>>>>>>> Suggestions: >>>>>>>>> 1. Let it run longer. At least an archive period. >>>>>>>>> 2. Alternatively, run weewxd directly from the console >>>>>>>>> <http://www.weewx.com/docs/usersguide.htm#Running_directly> for a >>>>>>>>> while. It will print out LOOP packets as they arrive, allowing you to >>>>>>>>> check >>>>>>>>> whether weewx is properly receiving data. >>>>>>>>> >>>>>>>>> -tk >>>>>>>>> >>>>>>>>> On Fri, May 28, 2021 at 5:03 AM valken...@gmail.com < >>>>>>>>> valken...@gmail.com> wrote: >>>>>>>>> >>>>>>>>>> Hi, >>>>>>>>>> Iḿ having troubles with a weewx inatance running on ubuntu 20. >>>>>>>>>> After an unforseen power outage, the system came back up, but weewx >>>>>>>>>> stopped >>>>>>>>>> processing data. The system is connected to an ulitmeter 2100 via >>>>>>>>>> ttyS0. >>>>>>>>>> With screen I do see data on that port. However weewx starts, and >>>>>>>>>> does >>>>>>>>>> nothing. No errors in the log, no activity at actually after starting >>>>>>>>>> weewx. If I manually stop weewx, it results in an error in the log, >>>>>>>>>> before >>>>>>>>>> stopping. I reinstalled weewx, emptied the database but no effect. I >>>>>>>>>> just >>>>>>>>>> doesn´t process data. Debug level=1. Maybe someone can help me out? >>>>>>>>>> >>>>>>>>>> Log entries: >>>>>>>>>> >>>>>>>>>> May 28 14:00:18 kwsweerstation systemd[1]: Starting LSB: weewx >>>>>>>>>> weather system... >>>>>>>>>> May 28 14:00:18 kwsweerstation weewx[11973]: * Starting weewx >>>>>>>>>> weather system weewx >>>>>>>>>> May 28 14:00:18 kwsweerstation weewx[11991] INFO __main__: >>>>>>>>>> Initializing weewx version 4.5.1 >>>>>>>>>> May 28 14:00:18 kwsweerstation weewx[11991] INFO __main__: Using >>>>>>>>>> Python 3.8.5 (default, Jan 27 2021, 15:41:15) #012[GCC 9.3.0] >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11991] INFO __main__: >>>>>>>>>> Platform Linux-5.4.0-73-generic-x86_64-with-glibc2.29 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11991] INFO __main__: Locale >>>>>>>>>> is 'nl_NL.UTF-8' >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11991] INFO __main__: PID >>>>>>>>>> file is /var/run/weewx.pid >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO __main__: Using >>>>>>>>>> configuration file /etc/weewx/weewx.conf >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO __main__: Debug >>>>>>>>>> is 1 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG __main__: >>>>>>>>>> Initializing engine >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO weewx.engine: >>>>>>>>>> Loading station type Ultimeter (weewx.drivers.ultimeter) >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO >>>>>>>>>> weewx.drivers.ultimeter: Driver version is 0.41 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO >>>>>>>>>> weewx.drivers.ultimeter: Using serial port /dev/ttyS0 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG >>>>>>>>>> weewx.drivers.ultimeter: Open serial port /dev/ttyS0 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service weewx.engine.StdTimeSynch >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service weewx.engine.StdTimeSynch >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service weewx.engine.StdConvert >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO weewx.engine: >>>>>>>>>> StdConvert target unit is 0x1 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service weewx.engine.StdConvert >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service weewx.engine.StdCalibrate >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service weewx.engine.StdCalibrate >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service weewx.engine.StdQC >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service weewx.engine.StdQC >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service weewx.wxservices.StdWXCalculate >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11973]: ...done. >>>>>>>>>> May 28 14:00:19 kwsweerstation systemd[1]: Started LSB: weewx >>>>>>>>>> weather system. >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.manager: >>>>>>>>>> Daily summary version is 4.0 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service weewx.wxservices.StdWXCalculate >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service user.cmon.ComputerMonitor >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> service version is 0.20 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.manager: >>>>>>>>>> Daily summary version is 4.0 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> sysinfo: Linux kwsweerstation 5.4.0-73-generic #82-Ubuntu SMP Wed >>>>>>>>>> Apr 14 >>>>>>>>>> 17:39:42 UTC 2021 x86_64 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: processor: 3 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: vendor_id: GenuineIntel >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: cpu family: 6 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: model: 28 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: model name: Intel(R) Atom(TM) CPU 330 @ 1.60GHz >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: stepping: 2 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: microcode: 0x219 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: cpu MHz: 1597.071 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: cache size: 512 KB >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: physical id: 0 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: siblings: 4 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: core id: 1 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: cpu cores: 2 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: apicid: 3 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: initial apicid: 3 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: fpu: yes >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: fpu_exception: yes >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: cpuid level: 10 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: wp: yes >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge >>>>>>>>>> mca >>>>>>>>>> cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx >>>>>>>>>> lm >>>>>>>>>> constant_tsc arch_perfmon pebs bts nopl cpuid aperfmperf pni dtes64 >>>>>>>>>> monitor >>>>>>>>>> ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm dtherm >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: bugs: >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: bogomips: 3194.12 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: clflush size: 64 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: cache_alignment: 64 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: address sizes: 32 bits physical, 48 bits virtual >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.cmon: >>>>>>>>>> cpuinfo: power management: >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service user.cmon.ComputerMonitor >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service user.crt.CumulusRealTime >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.crt: >>>>>>>>>> service version is 0.21 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.crt: >>>>>>>>>> realtime txt output goes to >>>>>>>>>> /var/www/weerstation/realtime/realtime.txt >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.crt: 'None' >>>>>>>>>> values will be displayed as N/A >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.crt: units >>>>>>>>>> will be displayed as METRICWX >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.crt: wind >>>>>>>>>> units will be displayed as knot >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.crt: >>>>>>>>>> zambretti forecast: False >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO user.crt: >>>>>>>>>> binding is loop >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service user.crt.CumulusRealTime >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service weewx.wxxtypes.StdWXXTypes >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service weewx.wxxtypes.StdWXXTypes >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service weewx.wxxtypes.StdPressureCooker >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service weewx.wxxtypes.StdPressureCooker >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service weewx.wxxtypes.StdRainRater >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service weewx.wxxtypes.StdRainRater >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service weewx.wxxtypes.StdDelta >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service weewx.wxxtypes.StdDelta >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service weewx.engine.StdArchive >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO weewx.engine: >>>>>>>>>> Archive will use data binding wx_binding >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO weewx.engine: >>>>>>>>>> Record generation will be attempted in 'hardware' >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO weewx.engine: >>>>>>>>>> Using archive interval of 300 seconds (specified in weewx >>>>>>>>>> configuration) >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Use LOOP data in hi/low calculations: 1 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service weewx.engine.StdArchive >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service weewx.restx.StdStationRegistry >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO weewx.restx: >>>>>>>>>> StationRegistry: Station will be registered. >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service weewx.restx.StdStationRegistry >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service weewx.restx.StdWunderground >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO weewx.restx: >>>>>>>>>> Wunderground: Posting not enabled. >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service weewx.restx.StdWunderground >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service weewx.restx.StdPWSweather >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO weewx.restx: >>>>>>>>>> PWSweather: Posting not enabled. >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service weewx.restx.StdPWSweather >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service weewx.restx.StdCWOP >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO weewx.restx: >>>>>>>>>> CWOP: Data for station FW4650 will be posted >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service weewx.restx.StdCWOP >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service weewx.restx.StdWOW >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO weewx.restx: >>>>>>>>>> WOW: Data for station b24a4cf1-0de4-e611-9401-0003ff5987fb will be >>>>>>>>>> posted >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service weewx.restx.StdWOW >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service weewx.restx.StdAWEKAS >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] INFO weewx.restx: >>>>>>>>>> AWEKAS: Posting not enabled. >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service weewx.restx.StdAWEKAS >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service user.twitter.Twitter >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.manager: >>>>>>>>>> Daily summary version is 4.0 >>>>>>>>>> May 28 14:00:19 kwsweerstation weewx[11994] DEBUG weewx.manager: >>>>>>>>>> Daily summary version is 4.0 >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] INFO user.twitter: >>>>>>>>>> service version is 0.15 >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] INFO weewx.restx: >>>>>>>>>> Twitter: No config info. Skipped. >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service user.twitter.Twitter >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service user.windfinder.WindFinder >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] INFO user.windfinder: >>>>>>>>>> service version is 0.12 >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] INFO user.windfinder: >>>>>>>>>> Data will be uploaded for snitser_mar >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service user.windfinder.WindFinder >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service weewx.engine.StdPrint >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service weewx.engine.StdPrint >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Loading service weewx.engine.StdReport >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Finished loading service weewx.engine.StdReport >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] INFO __main__: >>>>>>>>>> Starting up weewx version 4.5.1 >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] DEBUG weewx.engine: >>>>>>>>>> Station does not support reading the time >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] INFO weewx.engine: >>>>>>>>>> Using binding 'wx_binding' to database 'weewx.sdb' >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] INFO weewx.manager: >>>>>>>>>> Starting backfill of daily summaries >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] INFO weewx.manager: >>>>>>>>>> Daily summaries up to date >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] INFO weewx.engine: >>>>>>>>>> Starting main packet loop. >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] DEBUG >>>>>>>>>> weewx.drivers.ultimeter: Set station to logger mode >>>>>>>>>> May 28 14:00:20 kwsweerstation weewx[11994] DEBUG weewx.manager: >>>>>>>>>> Daily summary version is 4.0 >>>>>>>>>> May 28 14:00:23 kwsweerstation systemd[1]: Stopping LSB: weewx >>>>>>>>>> weather system... >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[12001]: * Stopping weewx >>>>>>>>>> weather system weewx >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] INFO __main__: >>>>>>>>>> Received signal TERM (15). >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] INFO weewx.engine: >>>>>>>>>> Main loop exiting. Shutting engine down. >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG weewx.restx: >>>>>>>>>> Shut down WindFinder thread. >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG weewx.restx: >>>>>>>>>> Shut down WOW thread. >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG weewx.restx: >>>>>>>>>> Shut down CWOP thread. >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG weewx.restx: >>>>>>>>>> Shut down StationRegistry thread. >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG >>>>>>>>>> weewx.drivers.ultimeter: Close serial port /dev/ttyS0 >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] INFO __main__: >>>>>>>>>> Terminating weewx version 4.5.1 >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG __main__: >>>>>>>>>> **** Traceback (most recent call last): >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG __main__: >>>>>>>>>> **** File "/usr/share/weewx/weewxd", line 157, in main >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG __main__: >>>>>>>>>> **** engine.run() >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG __main__: >>>>>>>>>> **** File "/usr/share/weewx/weewx/engine.py", line 208, in run >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG __main__: >>>>>>>>>> **** for packet in self.console.genLoopPackets(): >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG __main__: >>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/ultimeter.py", line >>>>>>>>>> 130, in >>>>>>>>>> genLoopPackets >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG __main__: >>>>>>>>>> **** readings = >>>>>>>>>> self.station.get_readings_with_retry(self.max_tries, >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG __main__: >>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/ultimeter.py", line >>>>>>>>>> 259, in >>>>>>>>>> get_readings_with_retry >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG __main__: >>>>>>>>>> **** buf = self.get_readings() >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG __main__: >>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/ultimeter.py", line >>>>>>>>>> 229, in >>>>>>>>>> get_readings >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG __main__: >>>>>>>>>> **** c = self.serial_port.read(1) >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG __main__: >>>>>>>>>> **** File >>>>>>>>>> "/usr/lib/python3/dist-packages/serial/serialposix.py", line >>>>>>>>>> 483, in read >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG __main__: >>>>>>>>>> **** ready, _, _ = select.select([self.fd, >>>>>>>>>> self.pipe_abort_read_r], >>>>>>>>>> [], [], timeout.time_left()) >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG __main__: >>>>>>>>>> **** File "/usr/share/weewx/weewxd", line 260, in sigTERMhandler >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG __main__: >>>>>>>>>> **** raise Terminate >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[11994] DEBUG __main__: >>>>>>>>>> **** Terminate >>>>>>>>>> May 28 14:00:23 kwsweerstation weewx[12001]: ...done. >>>>>>>>>> May 28 14:00:23 kwsweerstation systemd[1]: weewx.service: >>>>>>>>>> Succeeded. >>>>>>>>>> May 28 14:00:23 kwsweerstation systemd[1]: Stopped LSB: weewx >>>>>>>>>> weather system. >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/4a059e50-2fd5-4daa-80d6-ebcecccf46can%40googlegroups.com >>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/4a059e50-2fd5-4daa-80d6-ebcecccf46can%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>> . >>>>>>>>>> >>>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "weewx-user" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>> >>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/weewx-user/909270b6-c0a8-436a-a7bf-e6a2a50e3b48n%40googlegroups.com >>>>>>>> <https://groups.google.com/d/msgid/weewx-user/909270b6-c0a8-436a-a7bf-e6a2a50e3b48n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>> . >>>>>>>> >>>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to weewx-user+...@googlegroups.com. >>>>> >>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/6f526cac-1942-461d-bfb3-d743bfc2cef6n%40googlegroups.com >>>>> <https://groups.google.com/d/msgid/weewx-user/6f526cac-1942-461d-bfb3-d743bfc2cef6n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to weewx-user+...@googlegroups.com. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/8662189b-7232-428a-a6f7-02d0e7635262n%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/8662189b-7232-428a-a6f7-02d0e7635262n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/d588202b-4752-42ca-89c4-a05d63ed2949n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/d588202b-4752-42ca-89c4-a05d63ed2949n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zEC-sW0VBAQicqpF1smXF_O%3Da3c-2UmXk6vMWvWk%2BmuKtg%40mail.gmail.com.