Google Groups does that. It will quarantine random emails, but not show them on the "Pending" list where I can release them. They just go into purgatory. Then a few days later they all show up.
On Thu, Feb 10, 2022 at 6:26 AM paul...@gmail.com <p...@pmeaton.plus.com> wrote: > Hi Andy > Yes, your graphs look fine now - glad the suggestion worked. > It was worth me persevering - all the above "Message has been deleted" > were me trying to post! > Don't know what I was doing wrong! > Paul > > On Thursday, 10 February 2022 at 12:49:52 UTC andyhud...@googlemail.com > wrote: > >> I think that's the answer - thanks Paul... just editing it now :) all the >> answers are really appreciated, >> >> Andy >> >> On Thursday, 10 February 2022 at 12:35:14 UTC paul...@gmail.com wrote: >> >>> >>> Hi Andy >>> I don't know if it helps but I've looked at your website and noticed >>> that if you hover over the day graphs you are showing some data points - >>> but only at intervals of every 30 minutes. This doesn't tie in with gapsize >>> = 300 which equates to an interval of 5 minutes. As it says in graphs.conf >>> gapsize should be the same as the archive_interval from weewx.conf. If it >>> isn't then I don't think you will get any lines plotted. >>> This is a link to the gapsize section in the Belchertown charts >>> documentation. >>> >>> https://github.com/poblabs/weewx-belchertown/wiki/Belchertown-Charts-Documentation#gapsize >>> I think your week, month and year graphs plot correctly because the >>> gapsize for these graphs is greater than your archive interval. >>> I'm no expert but maybe you need to check why you are only sending (or >>> receiving) data every 30 minutes? >>> Paul >>> >>> On Wednesday, 9 February 2022 at 19:24:07 UTC gjr80 wrote: >>> >>>> I suspect you have a case of corrupt station memory. This manifests >>>> itself as a Davis station that continues to emit loop but not archive data. >>>> In your case you clearly still have loop data being received as your >>>> dashboard updates with real data every couple of seconds. The lack of >>>> recent archive records means that your day plots may be blank/partially >>>> blank due to the lack of recent archive record data, longer historical >>>> plots still show correctly up until the date-time the corrupt station >>>> memory kicked in. The diagnosis can be confirmed by looking at the log, >>>> there will be no errors but you will notice there are no archive records >>>> being saved. If you have debug=1 you will also be able to tell by the >>>> drivers interaction with your station. >>>> >>>> I suggest you work through the steps under Corrupt station memory >>>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#corrupt-station-memory> >>>> in the Troubleshooting Davis stations >>>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station> >>>> wiki article. >>>> >>>> Gary >>>> >>>> On Wednesday, 9 February 2022 at 22:49:16 UTC+10 >>>> andyhud...@googlemail.com wrote: >>>> >>>>> Afternoon - I cant work out why for the life of me i have no lines on >>>>> some of my day graphs: >>>>> >>>>> http://www.finchamweather.co.uk/graphs/?graph=all >>>>> >>>>> A sub section of my graphs.conf for day is below - any thoughts would >>>>> be really welcome.. >>>>> >>>>> Andy >>>>> >>>>> [day] >>>>> >>>>> # Chart Timespan Defaults >>>>> >>>>> title = "Today" >>>>> >>>>> show_button = true >>>>> >>>>> button_text = "Day" >>>>> >>>>> time_length = today >>>>> >>>>> tooltip_date_format = "LLL" >>>>> >>>>> gapsize = 300 # This should be your archive_interval from >>>>> weewx.conf >>>>> >>>>> >>>>> [[chart1]] >>>>> >>>>> title = Temperature >>>>> >>>>> [[[outTemp]]] >>>>> >>>>> zIndex = 1 >>>>> >>>>> name = Temperature >>>>> >>>>> [[[windchill]]] >>>>> >>>>> [[[heatindex]]] >>>>> >>>>> color = "#f7a35c" >>>>> >>>>> [[[dewpoint]]] >>>>> >>>>> color = purple >>>>> >>>>> >>>>> [[chart2]] >>>>> >>>>> # The combined Wind Chart works best in this configuration >>>>> >>>>> title = Wind Speed and Direction >>>>> >>>>> yAxis_min = 0 >>>>> >>>>> [[[windDir]]] >>>>> >>>>> zIndex = 1 >>>>> >>>>> yAxis = 1 >>>>> >>>>> yAxis_max = 360 >>>>> >>>>> lineWidth = 1 >>>>> >>>>> [[[[marker]]]] >>>>> >>>>> enabled = true >>>>> >>>>> [[[[states]]]] >>>>> >>>>> [[[[[hover]]]]] >>>>> >>>>> lineWidthPlus = 0 >>>>> >>>>> [[[windGust]]] >>>>> >>>>> [[[windSpeed]]] >>>>> >>>>> zIndex = 2 >>>>> >>>> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/eb81f94e-29ff-43c5-87a1-a18abe89ca19n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/eb81f94e-29ff-43c5-87a1-a18abe89ca19n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zEBKoxexOW9B%3DPRe%3DtGZGP0HT1ErU4vjgKCaLObxOnKVkg%40mail.gmail.com.
