I have turned off the firewall in ufw to see if it was any port closures
that were causing issues. I also opened port 80 on the weather station in
my router.
Here's how my conf file is set up:
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 0
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# Whether to log successful operations. May get overridden below.
log_success = True
# Whether to log unsuccessful operations. May get overridden below.
log_failure = True
# Do not modify this. It is used when installing and updating weewx.
version = 4.10.2
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = "Spokane, WA"
# Latitude in decimal degrees. Negative for southern hemisphere
latitude = 47.6884
# Longitude in decimal degrees. Negative for western hemisphere.
longitude = -117.4528
# Altitude of the station, with the unit it is in. This is used only
# if the hardware cannot supply a value.
altitude = 1900, foot
# Set to type of station hardware. There must be a corresponding stanza
# in this file, which includes a value for the 'driver' option.
station_type = Interceptor
# If you have a website, you may specify an URL. This is required if you
# intend to register your station.
#station_url = http://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 6
##############################################################################
[Interceptor]
# This section is for the network traffic interceptor driver.
# The driver to use:
driver = user.interceptor
# Specify the hardware device to capture. Options include:
# acurite-bridge - acurite internet bridge, smarthub, or access
# observer - fine offset WH2600/HP1000/HP1003, ambient WS2902
# lw30x - oregon scientific LW301/LW302
# lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge
# ecowitt-client - any hardware that uses the ecowitt protocol
# wu-client - any hardware that uses the weather underground protocol
device_type = observer
mode = sniff
iface = wlan0
pcap_filter = src 192.168.4.214 and dst port 80
##############################################################################
[WS2902]
# transceiver_frequency = 915
# model = "Ambient Weather WS2902"
###############################################################################
[Simulator]
# This section is for the weewx weather station simulator
# The time (in seconds) between LOOP packets.
## loop_interval = 2.5
# The simulator mode can be either 'simulator' or 'generator'.
# Real-time simulator. Sleep between each LOOP packet.
## mode = simulator
# Generator. Emit LOOP packets as fast as possible (useful for
testing).
#mode = generator
# The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the
default
# is to use the present time.
#start = 2011-01-01T00:00
# The driver to use:
## driver = weewx.drivers.simulator
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
# Uncomment and change to override logging for uploading services.
# log_success = True
# log_failure = True
[[StationRegistry]]
# To register this weather station with weewx, set this to true,
# then fill out option 'station_url', located in the [Station]
section above.
register_this_station = false
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to post to AWEKAS, set the option 'enable' to true,
then specify a username
# and password. To guard against parsing errors, put the password
in quotes.
enable = false
username = replace_me
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to post to CWOP, set the option 'enable' to true,
# then specify the station ID (e.g., CW1234).
enable = false
station = replace_me
# If this is an APRS (radio amateur) station, specify the
On Thursday, December 7, 2023 at 8:18:27 PM UTC-8 vince wrote:
> In the absence of you providing any config file(s) nor debug=1 logs nope
> no ideas other than trying dropping shields and running with no firewall if
> you can do that safely on your network.
>
> On Thursday, December 7, 2023 at 6:16:59 PM UTC-8 Mark Sanchez wrote:
>
>> Hello,
>> I have now wasted four days so far trying to get weewx setup with my
>> Ambient WS-2902 using interceptor to sniff the packets as it's headed to
>> Ambient Weather's site. I believe I have it running at this point and
>> Apache is set up but nothing is going into the specified folder. How can I
>> tell if it's sniffing the data or not?
>>
>> thechez@raspberrypi:~ $ service weewx status
>> ● weewx.service - LSB: weewx weather system
>> Loaded: loaded (/etc/init.d/weewx; generated)
>> Active: active (running) since Thu 2023-12-07 18:12:50 PST; 55s ago
>> Docs: man:systemd-sysv-generator(8)
>> Process: 433 ExecStart=/etc/init.d/weewx start (code=exited,
>> status=0/SUCCESS)
>> Tasks: 2 (limit: 1595)
>> CPU: 1.314s
>> CGroup: /system.slice/weewx.service
>> └─657 python3 /usr/share/weewx/weewxd --daemon
>> --pidfile=/var/run/weewx.pid /etc/weewx/weewx.conf
>>
>> Dec 07 18:12:50 raspberrypi python3[657]: weewx[657] INFO weewx.restx:
>> PWSweather: Posting not enabled.
>> Dec 07 18:12:50 raspberrypi python3[657]: weewx[657] INFO weewx.restx:
>> CWOP: Posting not enabled.
>> Dec 07 18:12:50 raspberrypi python3[657]: weewx[657] INFO weewx.restx:
>> WOW: Posting not enabled.
>> Dec 07 18:12:50 raspberrypi python3[657]: weewx[657] INFO weewx.restx:
>> AWEKAS: Posting not enabled.
>> Dec 07 18:12:51 raspberrypi python3[657]: weewx[657] INFO weewx.engine:
>> 'pyephem' detected, extended almanac data is available
>> Dec 07 18:12:51 raspberrypi python3[657]: weewx[657] INFO __main__:
>> Starting up weewx version 4.10.2
>> Dec 07 18:12:51 raspberrypi python3[657]: weewx[657] INFO weewx.engine:
>> Using binding 'wx_binding' to database 'weewx.sdb'
>> Dec 07 18:12:51 raspberrypi python3[657]: weewx[657] INFO weewx.manager:
>> Starting backfill of daily summaries
>> Dec 07 18:12:51 raspberrypi python3[657]: weewx[657] INFO weewx.manager:
>> Daily summaries up to date
>> Dec 07 18:12:51 raspberrypi python3[657]: weewx[657] INFO weewx.engine:
>> Starting main packet loop.
>>
>> I have changed my iptables to capture the local IP and port but it
>> doesn't seem to be doing anything. Any ideas or any more information I
>> could add?
>> Thanks.
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/8664644c-92e8-4f11-a861-780f24bd3f63n%40googlegroups.com.
