I actually restarted and am getting something where the interceptor is finally being pinged but it's showing this in the syslog: thechez@raspberrypi:~ $ sudo tail -f /var/log/syslog Dec 8 08:51:10 raspberrypi weewx[1041] INFO weewx.manager: Daily summaries up to date Dec 8 08:51:10 raspberrypi weewx[1041] INFO weewx.engine: Starting main packet loop. Dec 8 08:51:20 raspberrypi weewx[1041] DEBUG user.interceptor: empty queue Dec 8 08:51:30 raspberrypi weewx[1041] DEBUG user.interceptor: empty queue Dec 8 08:51:40 raspberrypi weewx[1041] DEBUG user.interceptor: empty queue Dec 8 08:51:50 raspberrypi weewx[1041] DEBUG user.interceptor: empty queue Dec 8 08:52:00 raspberrypi weewx[1041] DEBUG user.interceptor: empty queue Dec 8 08:52:10 raspberrypi weewx[1041] DEBUG user.interceptor: empty queue Dec 8 08:52:20 raspberrypi weewx[1041] DEBUG user.interceptor: empty queue
So it's acknowledging the interceptor driver but nothing is going in? On Friday, December 8, 2023 at 8:20:08 AM UTC-8 Mark Sanchez wrote: > I have turned off the firewall in ufw to see if it was any port closures > that were causing issues. I also opened port 80 on the weather station in > my router. > > Here's how my conf file is set up: > > # Set to 1 for extra debug info, otherwise comment it out or set to zero > debug = 0 > > # Root directory of the weewx data file hierarchy for this station > WEEWX_ROOT = / > > # Whether to log successful operations. May get overridden below. > log_success = True > > # Whether to log unsuccessful operations. May get overridden below. > log_failure = True > > # Do not modify this. It is used when installing and updating weewx. > version = 4.10.2 > > > ############################################################################## > > # This section is for information about the station. > > [Station] > > # Description of the station location > location = "Spokane, WA" > > # Latitude in decimal degrees. Negative for southern hemisphere > latitude = 47.6884 > # Longitude in decimal degrees. Negative for western hemisphere. > longitude = -117.4528 > > # Altitude of the station, with the unit it is in. This is used only > # if the hardware cannot supply a value. > altitude = 1900, foot > > # Set to type of station hardware. There must be a corresponding stanza > # in this file, which includes a value for the 'driver' option. > station_type = Interceptor > > # If you have a website, you may specify an URL. This is required if > you > # intend to register your station. > #station_url = http://www.example.com > > # The start of the rain year (1=January; 10=October, etc.). This is > # downloaded from the station if the hardware supports it. > rain_year_start = 1 > > # Start of week (0=Monday, 6=Sunday) > week_start = 6 > > > ############################################################################## > > [Interceptor] > # This section is for the network traffic interceptor driver. > > # The driver to use: > driver = user.interceptor > > # Specify the hardware device to capture. Options include: > # acurite-bridge - acurite internet bridge, smarthub, or access > # observer - fine offset WH2600/HP1000/HP1003, ambient WS2902 > # lw30x - oregon scientific LW301/LW302 > # lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge > # ecowitt-client - any hardware that uses the ecowitt protocol > # wu-client - any hardware that uses the weather underground protocol > > device_type = observer > mode = sniff > iface = wlan0 > pcap_filter = src 192.168.4.214 and dst port 80 > > > ############################################################################## > > [WS2902] > # transceiver_frequency = 915 > # model = "Ambient Weather WS2902" > > > ############################################################################### > > [Simulator] > # This section is for the weewx weather station simulator > > # The time (in seconds) between LOOP packets. > ## loop_interval = 2.5 > > # The simulator mode can be either 'simulator' or 'generator'. > # Real-time simulator. Sleep between each LOOP packet. > ## mode = simulator > # Generator. Emit LOOP packets as fast as possible (useful for > testing). > #mode = generator > > # The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the > default > # is to use the present time. > #start = 2011-01-01T00:00 > > # The driver to use: > ## driver = weewx.drivers.simulator > > > ############################################################################## > > # This section is for uploading data to Internet sites > > [StdRESTful] > > # Uncomment and change to override logging for uploading services. > # log_success = True > # log_failure = True > > [[StationRegistry]] > # To register this weather station with weewx, set this to true, > # then fill out option 'station_url', located in the [Station] > section above. > register_this_station = false > > [[AWEKAS]] > # This section is for configuring posts to AWEKAS. > > # If you wish to post to AWEKAS, set the option 'enable' to true, > then specify a username > # and password. To guard against parsing errors, put the password > in quotes. > enable = false > username = replace_me > password = replace_me > > [[CWOP]] > # This section is for configuring posts to CWOP. > > # If you wish to post to CWOP, set the option 'enable' to true, > # then specify the station ID (e.g., CW1234). > enable = false > station = replace_me > # If this is an APRS (radio amateur) station, specify the > > On Thursday, December 7, 2023 at 8:18:27 PM UTC-8 vince wrote: > >> In the absence of you providing any config file(s) nor debug=1 logs nope >> no ideas other than trying dropping shields and running with no firewall if >> you can do that safely on your network. >> >> On Thursday, December 7, 2023 at 6:16:59 PM UTC-8 Mark Sanchez wrote: >> >>> Hello, >>> I have now wasted four days so far trying to get weewx setup with my >>> Ambient WS-2902 using interceptor to sniff the packets as it's headed to >>> Ambient Weather's site. I believe I have it running at this point and >>> Apache is set up but nothing is going into the specified folder. How can I >>> tell if it's sniffing the data or not? >>> >>> thechez@raspberrypi:~ $ service weewx status >>> ● weewx.service - LSB: weewx weather system >>> Loaded: loaded (/etc/init.d/weewx; generated) >>> Active: active (running) since Thu 2023-12-07 18:12:50 PST; 55s ago >>> Docs: man:systemd-sysv-generator(8) >>> Process: 433 ExecStart=/etc/init.d/weewx start (code=exited, >>> status=0/SUCCESS) >>> Tasks: 2 (limit: 1595) >>> CPU: 1.314s >>> CGroup: /system.slice/weewx.service >>> └─657 python3 /usr/share/weewx/weewxd --daemon >>> --pidfile=/var/run/weewx.pid /etc/weewx/weewx.conf >>> >>> Dec 07 18:12:50 raspberrypi python3[657]: weewx[657] INFO weewx.restx: >>> PWSweather: Posting not enabled. >>> Dec 07 18:12:50 raspberrypi python3[657]: weewx[657] INFO weewx.restx: >>> CWOP: Posting not enabled. >>> Dec 07 18:12:50 raspberrypi python3[657]: weewx[657] INFO weewx.restx: >>> WOW: Posting not enabled. >>> Dec 07 18:12:50 raspberrypi python3[657]: weewx[657] INFO weewx.restx: >>> AWEKAS: Posting not enabled. >>> Dec 07 18:12:51 raspberrypi python3[657]: weewx[657] INFO weewx.engine: >>> 'pyephem' detected, extended almanac data is available >>> Dec 07 18:12:51 raspberrypi python3[657]: weewx[657] INFO __main__: >>> Starting up weewx version 4.10.2 >>> Dec 07 18:12:51 raspberrypi python3[657]: weewx[657] INFO weewx.engine: >>> Using binding 'wx_binding' to database 'weewx.sdb' >>> Dec 07 18:12:51 raspberrypi python3[657]: weewx[657] INFO weewx.manager: >>> Starting backfill of daily summaries >>> Dec 07 18:12:51 raspberrypi python3[657]: weewx[657] INFO weewx.manager: >>> Daily summaries up to date >>> Dec 07 18:12:51 raspberrypi python3[657]: weewx[657] INFO weewx.engine: >>> Starting main packet loop. >>> >>> I have changed my iptables to capture the local IP and port but it >>> doesn't seem to be doing anything. Any ideas or any more information I >>> could add? >>> Thanks. >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/7b203f12-6c0f-4dc6-90d6-746584823d7fn%40googlegroups.com.