So it looks like your pressure is off by a factor of 100. I would think either of these would work (untested). http://www.weewx.com/docs/5.0/reference/weewx-options/stdcalibrate/?h=stdco [StdCalibrate] [[Corrections]] barometer = barometer / 100
https://github.com/bellrichm/WeeWX-MQTTSubscribe/wiki/Additional-Options#conversion_func [[[pa]]]] ignore = false # opt back in for this field name = barometer units = hPa conversion_func = lambda x : x / 100 I can see pros and cons of either. On Friday 2 February 2024 at 08:32:34 UTC-5 Frank Gruhlke wrote: > On a weewx re-boot this morning I spotted this warning: > > *WARNING weewx.qc: 2024-02-01 19:29:32 CST (1706837372) LOOP value > 'barometer' 2924.9393558775 <(939)%20355-8775> outside limits (26.0, 32.5)* > > Seems the driver is now converting the BME280 T reading of 98790.06 to > 2924.9393558775 <(939)%20355-8775>. Point of reference (30.00 in) is > about right for my location at this time. > Is there a way for the driver to also reformat the 2924.9393558775 > <(939)%20355-8775> to something more like 29.24 ? > > On Thursday, February 1, 2024 at 4:49:30 PM UTC-6 Frank Gruhlke wrote: > >> Hey Rich, thanks again... I managed to get my out-door temp to read F >> with this in my weewx.conf: >> >> [[[[temperature_C]]]] >> ignore = false >> name = outTemp >> units = degree_C >> >> I have tried every "units" option for Weewx Barometer unit ( inHg, mbar, >> hPa and kpa) >> for the "pa" field in my mqtt topic. >> >> [[[pa]]]] >> ignore = false # opt back in for this field >> name = barometer >> units = hPa >> >> I just get N/A (N/A) for the Barometer Reading in my reports. >> I don't see any errors restarting weewx. >> >> Here is what I am subscribed to in the driver. >> "pa" is the pressure reading I am trying to bring into Weewx >> >> { >> "tempc": 20.59, >> "tempf": 69.062, >> "hum": 38.88184, >> "pa": 98790.06, >> "altim": 213.1839, >> "altift": 699.4224 >> } >> >> >> *Any Ideas?* >> >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/fbcb2a79-b6ad-4def-8fb7-32e18c8bd175n%40googlegroups.com.