Hi Vince
OK unplugged and re-plugged weather station
It's a Watson 8681 which has been running v4 for 2-3 years having replaced
a Maplin both of which are FineOffset
The weather station is plugged directly into one of the usb2 ports, not a
usb3 (blue one)
The wifi is also plugged into one of the usb2 ports
Years back I encountered the FO lockup issue, this isn't the same issue as
I can sudo weewxd and it runs, hence doesn't appear that the console is
locked.
Thanks
_______________________________________
pi@weepi:~ $ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.10.63-v7l+ (dom@buildbot)
(arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld
(GNU Binutils for Ubuntu) 2.34) #1496 SMP Wed Dec 1 15:58:56 GMT 2021
[ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7),
cr=30c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction
cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2
[ 0.000000] random: fast init done
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at
0x000000001ac00000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id
shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000000000-0x000000007fffffff]
[ 0.000000] On node 0 totalpages: 504832
[ 0.000000] DMA zone: 1728 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:63
[ 0.000000] HighMem zone: 308224 pages, LIFO batch:63
[ 0.000000] percpu: Embedded 20 pages/cpu s50828 r8192 d22900 u81920
[ 0.000000] pcpu-alloc: s50828 r8192 d22900 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 503104
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0
snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
video=HDMI-A-1:1024x768M@60 smsc95xx.macaddr=DC:A6:32:B3:A2:CB
vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200
console=tty1 root=PARTUUID=328eb792-02 rootfstype=ext4 elevator=deadline
fsck.repair=yes rootwait
[ 0.000000] Kernel parameter elevator= does not have any effect anymore.
Please use sysfs to set IO scheduler for individual devices.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem
0x0000000015a00000-0x0000000019a00000] (64MB)
[ 0.000000] Memory: 1587372K/2019328K available (10240K kernel code,
1364K rwdata, 3192K rodata, 2048K init, 891K bss, 104276K reserved, 327680K
cma-reserved, 1232896K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 34315 entries in 68 pages
[ 0.000000] ftrace: allocated 68 pages with 2 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is
10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from
start_kernel+0x3c8/0x59c with crng_init=1
[ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps
every 2147483647500ns
[ 0.000036] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 1911260446275 ns
[ 0.000100] bcm2835: system timer (irq = 25)
[ 0.000748] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000770] clocksource: arch_sys_counter: mask: 0xffffffffffffff
max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000792] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every
4398046511102ns
[ 0.000811] Switching to timer-based delay loop, resolution 18ns
[ 0.001073] Console: colour dummy device 80x30
[ 0.001838] printk: console [tty1] enabled
[ 0.001905] Calibrating delay loop (skipped), value calculated using
timer frequency.. 108.00 BogoMIPS (lpj=540000)
[ 0.001960] pid_max: default: 32768 minimum: 301
[ 0.002138] LSM: Security Framework initializing
[ 0.002339] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes,
linear)
[ 0.002383] Mountpoint-cache hash table entries: 2048 (order: 1, 8192
bytes, linear)
[ 0.003879] cgroup: Disabling memory control group subsystem
[ 0.004128] CPU: Testing write buffer coherency: ok
[ 0.004607] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.005845] Setting up static identity map for 0x200000 - 0x20003c
[ 0.006061] rcu: Hierarchical SRCU implementation.
[ 0.007006] smp: Bringing up secondary CPUs ...
[ 0.008248] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.009624] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.011020] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.011181] smp: Brought up 1 node, 4 CPUs
[ 0.011228] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[ 0.011259] CPU: All CPU(s) started in HYP mode.
[ 0.011286] CPU: Virtualization extensions available.
[ 0.012166] devtmpfs: initialized
[ 0.026500] VFP support v0.3: implementor 41 architecture 3 part 40
variant 8 rev 0
[ 0.026753] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.026808] futex hash table entries: 1024 (order: 4, 65536 bytes,
linear)
[ 0.035088] pinctrl core: initialized pinctrl subsystem
[ 0.036204] NET: Registered protocol family 16
[ 0.040249] DMA: preallocated 1024 KiB pool for atomic coherent
allocations
[ 0.041099] audit: initializing netlink subsys (disabled)
[ 0.041377] audit: type=2000 audit(0.040:1): state=initialized
audit_enabled=0 res=1
[ 0.041944] thermal_sys: Registered thermal governor 'step_wise'
[ 0.042659] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4
watchpoint registers.
[ 0.042714] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.043142] Serial: AMBA PL011 UART driver
[ 0.075828] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.090907] raspberrypi-firmware soc:firmware: Attached to firmware from
2021-12-01T15:01:54, variant start
[ 0.100922] raspberrypi-firmware soc:firmware: Firmware hash is
71bd3109023a0c8575585ba87cbb374d2eeb038f
[ 0.142106] Kprobes globally optimized
[ 0.147489] bcm2835-dma fe007000.dma: DMA legacy API manager,
dmachans=0x1
[ 0.151755] vgaarb: loaded
[ 0.152221] SCSI subsystem initialized
[ 0.152466] usbcore: registered new interface driver usbfs
[ 0.152544] usbcore: registered new interface driver hub
[ 0.152632] usbcore: registered new device driver usb
[ 0.153004] usb_phy_generic phy: supply vcc not found, using dummy
regulator
[ 0.154927] clocksource: Switched to clocksource arch_sys_counter
[ 1.113767] VFS: Disk quotas dquot_6.6.0
[ 1.113889] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 1.114101] FS-Cache: Loaded
[ 1.114329] CacheFiles: Loaded
[ 1.115487] simple-framebuffer 3e8c7000.framebuffer: framebuffer at
0x3e8c7000, 0x300000 bytes, mapped to 0x(ptrval)
[ 1.115536] simple-framebuffer 3e8c7000.framebuffer: format=a8r8g8b8,
mode=1024x768x32, linelength=4096
[ 1.119910] Console: switching to colour frame buffer device 128x48
[ 1.123801] simple-framebuffer 3e8c7000.framebuffer: fb0: simplefb
registered!
[ 1.134226] NET: Registered protocol family 2
[ 1.134527] IP idents hash table entries: 16384 (order: 5, 131072 bytes,
linear)
[ 1.135908] tcp_listen_portaddr_hash hash table entries: 512 (order: 0,
6144 bytes, linear)
[ 1.136133] TCP established hash table entries: 8192 (order: 3, 32768
bytes, linear)
[ 1.136274] TCP bind hash table entries: 8192 (order: 4, 65536 bytes,
linear)
[ 1.136414] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.136647] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 1.136751] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes,
linear)
[ 1.137083] NET: Registered protocol family 1
[ 1.137842] RPC: Registered named UNIX socket transport module.
[ 1.137920] RPC: Registered udp transport module.
[ 1.137983] RPC: Registered tcp transport module.
[ 1.139872] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.141743] PCI: CLS 0 bytes, default 64
[ 1.146596] Initialise system trusted keyrings
[ 1.148685] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 1.158977] zbud: loaded
[ 1.163037] FS-Cache: Netfs 'nfs' registered for caching
[ 1.165682] NFS: Registering the id_resolver key type
[ 1.167532] Key type id_resolver registered
[ 1.169336] Key type id_legacy registered
[ 1.171207] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.172991] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver
Registering...
[ 1.175838] Key type asymmetric registered
[ 1.177617] Asymmetric key parser 'x509' registered
[ 1.179559] bounce: pool size: 64 pages
[ 1.181330] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 249)
[ 1.183329] io scheduler mq-deadline registered
[ 1.185157] io scheduler kyber registered
[ 1.191486] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000
ranges:
[ 1.193371] brcm-pcie fd500000.pcie: No bus range found for
/scb/pcie@7d500000, using [bus 00-ff]
[ 1.195393] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff
-> 0x00c0000000
[ 1.197329] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff
-> 0x0400000000
[ 1.257035] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.259244] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.261045] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.262861] pci_bus 0000:00: root bus resource [mem
0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 1.264786] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.266885] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.272154] PCI: bus0: Fast back to back transfers disabled
[ 1.274260] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 1.276172] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 1.278359] pci 0000:01:00.0: PME# supported from D0 D3cold
[ 1.283538] PCI: bus1: Fast back to back transfers disabled
[ 1.285328] pci 0000:00:00.0: BAR 8: assigned [mem
0x600000000-0x6000fffff]
[ 1.287054] pci 0000:01:00.0: BAR 0: assigned [mem
0x600000000-0x600000fff 64bit]
[ 1.288808] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.290485] pci 0000:00:00.0: bridge window [mem
0x600000000-0x6000fffff]
[ 1.292550] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[ 1.294441] pcieport 0000:00:00.0: PME: Signaling with IRQ 62
[ 1.305059] iproc-rng200 fe104000.rng: hwrng registered
[ 1.307028] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000
mem_size:0x40000000(1024 MiB)
[ 1.309600] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at
0xfe200000
[ 1.323657] brd: module loaded
[ 1.337928] loop: module loaded
[ 1.341418] Loading iSCSI transport class v2.0-870.
[ 1.346449] libphy: Fixed MDIO Bus: probed
[ 1.349885] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.364960] libphy: bcmgenet MII bus: probed
[ 1.455073] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.457998] usbcore: registered new interface driver r8152
[ 1.459765] usbcore: registered new interface driver lan78xx
[ 1.461498] usbcore: registered new interface driver smsc95xx
[ 1.464790] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142)
[ 1.466660] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.468374] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus
number 1
[ 1.473343] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version
0x100 quirks 0x0000060000000890
[ 1.476397] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 5.10
[ 1.478113] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.479803] usb usb1: Product: xHCI Host Controller
[ 1.481468] usb usb1: Manufacturer: Linux 5.10.63-v7l+ xhci-hcd
[ 1.483155] usb usb1: SerialNumber: 0000:01:00.0
[ 1.485576] hub 1-0:1.0: USB hub found
[ 1.487294] hub 1-0:1.0: 1 port detected
[ 1.489575] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.491251] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus
number 2
[ 1.492934] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.495153] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0003, bcdDevice= 5.10
[ 1.496862] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.498549] usb usb2: Product: xHCI Host Controller
[ 1.500188] usb usb2: Manufacturer: Linux 5.10.63-v7l+ xhci-hcd
[ 1.501837] usb usb2: SerialNumber: 0000:01:00.0
[ 1.504180] hub 2-0:1.0: USB hub found
[ 1.505910] hub 2-0:1.0: 4 ports detected
[ 1.509254] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.511182] dwc_otg: FIQ enabled
[ 1.511197] dwc_otg: NAK holdoff enabled
[ 1.511211] dwc_otg: FIQ split-transaction FSM enabled
[ 1.511229] Module dwc_common_port init
[ 1.511700] usbcore: registered new interface driver uas
[ 1.513400] usbcore: registered new interface driver usb-storage
[ 1.515432] mousedev: PS/2 mouse device common for all mice
[ 1.518702] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.523731] sdhci: Secure Digital Host Controller Interface driver
[ 1.525396] sdhci: Copyright(c) Pierre Ossman
[ 1.527699] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring
probe
[ 1.529979] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.536395] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.538358] hid: raw HID events driver (C) Jiri Kosina
[ 1.540174] usbcore: registered new interface driver usbhid
[ 1.541770] usbhid: USB HID core driver
[ 1.549338] Initializing XFRM netlink socket
[ 1.550970] NET: Registered protocol family 17
[ 1.552674] Key type dns_resolver registered
[ 1.554591] Registering SWP/SWPB emulation handler
[ 1.556360] registered taskstats version 1
[ 1.558028] Loading compiled-in X.509 certificates
[ 1.560456] Key type ._fscrypt registered
[ 1.562032] Key type .fscrypt registered
[ 1.563594] Key type fscrypt-provisioning registered
[ 1.576660] uart-pl011 fe201000.serial: there is not valid maps for
state default
[ 1.578580] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.580262] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36,
base_baud = 0) is a PL011 rev2
[ 1.588620] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains
driver
[ 1.591318] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.592932] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 1.622429] of_cfs_init
[ 1.624304] of_cfs_init: OK
[ 1.643472] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.646792] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.650053] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.654632] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.656225] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using
ADMA
[ 1.658412] Waiting for root device PARTUUID=328eb792-02...
[ 1.659683] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.749269] mmc1: new high speed SDIO card at address 0001
[ 1.771466] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
[ 1.773871] mmcblk0: mmc0:aaaa SM32G 29.7 GiB
[ 1.775457] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.779383] mmcblk0: p1 p2
[ 1.814785] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data
mode. Opts: (null)
[ 1.816503] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.818931] devtmpfs: mounted
[ 1.830488] Freeing unused kernel memory: 2048K
[ 1.865272] Run /sbin/init as init process
[ 1.866867] with arguments:
[ 1.866882] /sbin/init
[ 1.866896] with environment:
[ 1.866911] HOME=/
[ 1.866925] TERM=linux
[ 1.957681] usb 1-1: New USB device found, idVendor=2109,
idProduct=3431, bcdDevice= 4.21
[ 1.959357] usb 1-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 1.960997] usb 1-1: Product: USB2.0 Hub
[ 1.964966] hub 1-1:1.0: USB hub found
[ 1.966846] hub 1-1:1.0: 4 ports detected
[ 2.294990] usb 1-1.3: new high-speed USB device number 3 using xhci_hcd
[ 2.316507] systemd[1]: System time before build time, advancing clock.
[ 2.414139] NET: Registered protocol family 10
[ 2.417256] Segment Routing with IPv6
[ 2.426980] usb 1-1.3: New USB device found, idVendor=7392,
idProduct=7811, bcdDevice= 2.00
[ 2.428678] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.430327] usb 1-1.3: Product: 802.11n WLAN Adapter
[ 2.431969] usb 1-1.3: Manufacturer: Realtek
[ 2.433607] usb 1-1.3: SerialNumber: 00e04c000001
[ 2.494178] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT
+GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2
default-hierarchy=hybrid)
[ 2.499329] systemd[1]: Detected architecture arm.
[ 2.535016] usb 1-1.4: new low-speed USB device number 4 using xhci_hcd
[ 2.604423] systemd[1]: Set hostname to <weepi>.
[ 2.688735] usb 1-1.4: New USB device found, idVendor=1941,
idProduct=8021, bcdDevice= 1.00
[ 2.690706] usb 1-1.4: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.710885] hid-generic 0003:1941:8021.0001: hiddev96,hidraw0: USB HID
v1.00 Device [HID 1941:8021] on usb-0000:01:00.0-1.4/input0
[ 3.435958] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.453376] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.455925] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 3.460951] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.465236] systemd[1]: Created slice User and Session Slice.
[ 3.469963] systemd[1]: Reached target Slices.
[ 3.477330] systemd[1]: Created slice system-getty.slice.
[ 3.482504] systemd[1]: Listening on udev Kernel Socket.
[ 3.487774] systemd[1]: Listening on Syslog Socket.
[ 3.492879] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.664544] i2c /dev entries driver
[ 4.196669] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.283961] systemd-journald[125]: Received request to flush runtime
journal from PID 1
[ 4.943271] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem
initialised: Registers at 0xfeb00000 length 0x00010000
[ 4.943925] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem
initialised: Registers at 0xfeb10000 length 0x00001000
[ 4.944462] rpivid-mem feb20000.h264-decoder: rpivid-h264mem
initialised: Registers at 0xfeb20000 length 0x00010000
[ 4.952320] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised:
Registers at 0xfeb30000 length 0x00010000
[ 5.025946] snd_bcm2835: module is from the staging directory, the
quality is unknown, you have been warned.
[ 5.036776] mc: Linux media interface: v0.10
[ 5.037229] bcm2835_audio bcm2835_audio: card created with 4 channels
[ 5.040582] bcm2835_audio bcm2835_audio: card created with 4 channels
[ 5.059203] vc_sm_cma: module is from the staging directory, the quality
is unknown, you have been warned.
[ 5.061568] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 5.061594] [vc_sm_connected_init]: start
[ 5.071092] videodev: Linux video capture interface: v2.00
[ 5.074755] [vc_sm_connected_init]: installed successfully
[ 5.112081] bcm2835_mmal_vchiq: module is from the staging directory,
the quality is unknown, you have been warned.
[ 5.115561] bcm2835_mmal_vchiq: module is from the staging directory,
the quality is unknown, you have been warned.
[ 5.132006] bcm2835_codec: module is from the staging directory, the
quality is unknown, you have been warned.
[ 5.132013] bcm2835_isp: module is from the staging directory, the
quality is unknown, you have been warned.
[ 5.158596] bcm2835-isp bcm2835-isp: Device node output[0] registered as
/dev/video13
[ 5.158706] bcm2835-codec bcm2835-codec: Device registered as
/dev/video10
[ 5.158753] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 5.159495] bcm2835-isp bcm2835-isp: Device node capture[0] registered
as /dev/video14
[ 5.159946] bcm2835-isp bcm2835-isp: Device node capture[1] registered
as /dev/video15
[ 5.160286] bcm2835-isp bcm2835-isp: Device node stats[2] registered as
/dev/video16
[ 5.160542] bcm2835-isp bcm2835-isp: Register output node 0 with media
controller
[ 5.160568] bcm2835-isp bcm2835-isp: Register capture node 1 with media
controller
[ 5.160606] bcm2835-isp bcm2835-isp: Register capture node 2 with media
controller
[ 5.160629] bcm2835-isp bcm2835-isp: Register capture node 3 with media
controller
[ 5.170742] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 5.174735] bcm2835-codec bcm2835-codec: Device registered as
/dev/video11
[ 5.174783] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 5.188135] bcm2835-codec bcm2835-codec: Device registered as
/dev/video12
[ 5.188203] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 5.198071] bcm2835-codec bcm2835-codec: Device registered as
/dev/video18
[ 5.198119] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ 5.265570] bcm2835_v4l2: module is from the staging directory, the
quality is unknown, you have been warned.
[ 5.453830] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on
minor 0
[ 5.466853] cfg80211: Loading compiled-in X.509 certificates for
regulatory database
[ 5.474542] checking generic (3e8c7000 300000) vs hw (0 ffffffffffffffff)
[ 5.474572] fb0: switching to vc4drmfb from simple
[ 5.476008] Console: switching to colour dummy device 80x30
[ 5.490994] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops
[vc4])
[ 5.495885] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[ 5.556774] vc4-drm gpu: [drm] HDMI-A-1: EDID is invalid:
[ 5.556804] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.556821] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.556836] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.556851] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.556866] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.556882] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.556898] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.556920] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.570187] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.625233] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 5.647388] brcmfmac: brcmf_fw_alloc_request: using
brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 5.648535] usbcore: registered new interface driver brcmfmac
[ 5.701175] Console: switching to colour frame buffer device 128x48
[ 5.720135] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
[ 5.905073] rtl8192cu: Chip version 0x10
[ 5.914549] brcmfmac: brcmf_fw_alloc_request: using
brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 5.914665] brcmfmac: brcmf_fw_alloc_request: using
brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 5.925502] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0:
Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e
[ 6.222214] rtl8192cu: Board Type 0
[ 6.222486] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 6.222607] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 6.222967] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 6.229421] usbcore: registered new interface driver rtl8192cu
[ 8.263615] 8021q: 802.1Q VLAN Support v1.8
[ 8.429484] uart-pl011 fe201000.serial: no DMA platform data
[ 8.795080] Adding 102396k swap on /var/swap. Priority:-2 extents:1
across:102396k SSFS
[ 8.818172] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 10.404164] random: crng init done
[ 10.404179] random: 7 urandom warning(s) missed due to ratelimiting
[ 10.683548] rtl8192cu: MAC auto ON okay!
[ 10.717098] rtl8192cu: Tx queue select: 0x05
[ 11.487422] bcmgenet fd580000.ethernet: configuring instance for
external RGMII (RX delay)
[ 11.487918] bcmgenet fd580000.ethernet eth0: Link is Down
[ 12.646763] wlan1: authenticate with 74:da:88:1c:f1:52
[ 12.671476] wlan1: send auth to 74:da:88:1c:f1:52 (try 1/3)
[ 12.683346] wlan1: authenticated
[ 12.684978] wlan1: associate with 74:da:88:1c:f1:52 (try 1/3)
[ 12.700595] wlan1: RX AssocResp from 74:da:88:1c:f1:52 (capab=0x1011
status=0 aid=6)
[ 12.805087] wlan1: associated
[ 12.896838] cryptd: max_cpu_qlen set to 1000
[ 12.938084] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 14.147091] ICMPv6: process `dhcpcd' is using deprecated sysctl
(syscall) net.ipv6.neigh.wlan1.retrans_time - use
net.ipv6.neigh.wlan1.retrans_time_ms instead
[ 15.511073] Bluetooth: Core ver 2.22
[ 15.511192] NET: Registered protocol family 31
[ 15.511209] Bluetooth: HCI device and connection manager initialized
[ 15.511239] Bluetooth: HCI socket layer initialized
[ 15.511262] Bluetooth: L2CAP socket layer initialized
[ 15.511297] Bluetooth: SCO socket layer initialized
[ 15.520866] Bluetooth: HCI UART driver ver 2.3
[ 15.520889] Bluetooth: HCI UART protocol H4 registered
[ 15.520996] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 15.521326] Bluetooth: HCI UART protocol Broadcom registered
[ 15.787690] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 15.891966] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.891991] Bluetooth: BNEP filters: protocol multicast
[ 15.892019] Bluetooth: BNEP socket layer initialized
[ 15.950364] Bluetooth: RFCOMM TTY layer initialized
[ 15.950404] Bluetooth: RFCOMM socket layer initialized
[ 15.950444] Bluetooth: RFCOMM ver 1.11
[ 18.863860] FS-Cache: Netfs 'cifs' registered for caching
[ 18.887601] Key type cifs.spnego registered
[ 18.887645] Key type cifs.idmap registered
[ 18.889543] CIFS: Attempting to mount //192.168.1.65/pi
[ 18.889631] CIFS: VFS: Use of the less secure dialect vers=1.0 is not
recommended unless required for access to very old servers
[ 8701.285275] printk: systemd: 34 output lines suppressed due to
ratelimiting
[ 8701.333582] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT
+GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2
default-hierarchy=hybrid)
[ 8701.333952] systemd[1]: Detected architecture arm.
[ 8701.993338] systemd-journald[125]: Received SIGTERM from PID 1 (systemd).
[ 8701.993404] systemd[1]: Stopping Journal Service...
[ 8701.998089] systemd[1]: systemd-journald.service: Succeeded.
[ 8701.999105] systemd[1]: Stopped Journal Service.
[ 8702.005360] systemd[1]: Starting Journal Service...
[ 8702.044433] systemd[1]: Started Journal Service.
[10481.283632] usb 1-1.4: USB disconnect, device number 4
[10494.070493] usb 1-1.4: new low-speed USB device number 5 using xhci_hcd
[10494.213803] usb 1-1.4: New USB device found, idVendor=1941,
idProduct=8021, bcdDevice= 1.00
[10494.213825] usb 1-1.4: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[10494.228279] usbhid 1-1.4:1.0: can't add hid device: -32
[10494.228363] usbhid: probe of 1-1.4:1.0 failed with error -32
[10494.341507] usb 1-1.4: USB disconnect, device number 5
[10494.640528] usb 1-1.4: new low-speed USB device number 6 using xhci_hcd
[10494.783895] usb 1-1.4: New USB device found, idVendor=1941,
idProduct=8021, bcdDevice= 1.00
[10494.783916] usb 1-1.4: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[10494.801399] hid-generic 0003:1941:8021.0002: hiddev96,hidraw0: USB HID
v1.00 Device [HID 1941:8021] on usb-0000:01:00.0-1.4/input0
pi@weepi:~ $
____________________________________
pi@weepi:~ $ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 1941:8021 Dream Link WH1080 Weather Station / USB
Missile Launcher
Bus 001 Device 003: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un
802.11n Wireless Adapter [Realtek RTL8188CUS]
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pi@weepi:~ $
On Monday, June 24, 2024 at 7:41:26 PM UTC+1 vince wrote:
> Mike start with the minimum complexity on this one. Unplug your device
> then plug it in, and look at output of 'dmesg' and 'lsusb' to verify which
> device it detects.
>
> There are some very ancient threads here for FO station craziness with
> solutions saying unplug and remove/reinsert batteries from the station and
> the like, but lets see what your USB setup looks like. Telling us which
> model station and whether you're using a usb multiport thing or connecting
> directly to the pi might help too.
>
> On Monday, June 24, 2024 at 11:30:48 AM UTC-7 mike.t...@noworries.plus.com
> wrote:
>
>> No I didn't
>> Neither /usr/lib/udev/rules.d/60-weewx.rules nor
>> /etc/udev/rules.d/60-weewx.rules exists
>> found this file though /etc/udev/rules.d/99-com.rules
>>
>> FYI this is an upgrade from v4 to 5 using FineOffset weather station
>>
>>
>> _____________________________________________________________________
>>
>> pi@weepi:~ $ more /etc/udev/rules.d/99-com.rules
>> SUBSYSTEM=="input", GROUP="input", MODE="0660"
>> SUBSYSTEM=="i2c-dev", GROUP="i2c", MODE="0660"
>> SUBSYSTEM=="spidev", GROUP="spi", MODE="0660"
>> SUBSYSTEM=="bcm2835-gpiomem", GROUP="gpio", MODE="0660"
>> SUBSYSTEM=="rpivid-*", GROUP="video", MODE="0660"
>>
>> KERNEL=="vcsm-cma", GROUP="video", MODE="0660"
>> SUBSYSTEM=="dma_heap", GROUP="video", MODE="0660"
>>
>> SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660"
>> SUBSYSTEM=="gpio", KERNEL=="gpiochip*", ACTION=="add", PROGRAM="/bin/sh
>> -c 'chgrp -R gpio /sys/class/gpio && chmod -R g=u /sys/class/gpio'"
>> SUBSYSTEM=="gpio", ACTION=="add", PROGRAM="/bin/sh -c 'chgrp -R gpio
>> /sys%p && chmod -R g=u /sys%p'"
>>
>> # PWM export results in a "change" action on the pwmchip device (not
>> "add" of a new device), so match actions other than "remove".
>> SUBSYSTEM=="pwm", ACTION!="remove", PROGRAM="/bin/sh -c 'chgrp -R gpio
>> /sys%p && chmod -R g=u /sys%p'"
>>
>> KERNEL=="ttyAMA0", PROGRAM="/bin/sh -c '\
>> ALIASES=/proc/device-tree/aliases; \
>> if cmp -s $$ALIASES/uart0 $$ALIASES/serial0; then \
>> echo 0;\
>> elif cmp -s $$ALIASES/uart0 $$ALIASES/serial1; then \
>> echo 1; \
>> else \
>> exit 1; \
>> fi\
>> '", SYMLINK+="serial%c"
>>
>> KERNEL=="ttyAMA1", PROGRAM="/bin/sh -c '\
>> ALIASES=/proc/device-tree/aliases; \
>> if [ -e /dev/ttyAMA0 ]; then \
>> exit 1; \
>> elif cmp -s $$ALIASES/uart0 $$ALIASES/serial0; then \
>> echo 0;\
>> elif cmp -s $$ALIASES/uart0 $$ALIASES/serial1; then \
>> echo 1; \
>> else \
>> exit 1; \
>> fi\
>> '", SYMLINK+="serial%c"
>>
>> KERNEL=="ttyS0", PROGRAM="/bin/sh -c '\
>> ALIASES=/proc/device-tree/aliases; \
>> if cmp -s $$ALIASES/uart1 $$ALIASES/serial0; then \
>> echo 0; \
>> elif cmp -s $$ALIASES/uart1 $$ALIASES/serial1; then \
>> echo 1; \
>> else \
>> exit 1; \
>> fi \
>> '", SYMLINK+="serial%c"
>>
>> ACTION=="add", SUBSYSTEM=="vtconsole", KERNEL=="vtcon1", RUN+="/bin/sh -c
>> '\
>> if echo RPi-Sense FB | cmp -s /sys/class/graphics/fb0/name; then \
>> echo 0 > /sys$devpath/bind; \
>> fi; \
>> '"
>>
>> On Monday, June 24, 2024 at 6:49:36 PM UTC+1 michael.k...@gmx.at wrote:
>>
>>> Did you install an udev rule?
>>>
>>> mike.t...@noworries.plus.com schrieb am Montag, 24. Juni 2024 um
>>> 18:01:17 UTC+2:
>>>
>>>> Thanks Michael I've worked through the doc but not found a resolution.
>>>>
>>>> pi the weewx user is in the following groups pi adm dialout cdrom sudo
>>>> audio video plugdev games users input netdev lpadmin gpio i2c spi
>>>>
>>>> The arm device is as follows;
>>>> (weewx-venv) pi@weepi:/home/weewx $ ls -l /dev/ttyAMA0
>>>> crw-rw---- 1 root dialout 204, 64 Jun 24 11:10 /dev/ttyAMA0
>>>>
>>>> ps -ef | grep weewx - shows no instances running
>>>>
>>>> If I sudo weewxd then it runs.
>>>> when running with sudo I see an error "unrecognised magic number 5528"
>>>> in the log
>>>>
>>>> Jun 24 16:57:46 weepi weewx[1345] INFO weewx.manager: Daily summaries
>>>> up to date
>>>> Jun 24 16:57:47 weepi weewx[1345] ERROR weewx.drivers.fousb:
>>>> unrecognised magic number 5528
>>>> Jun 24 16:57:47 weepi weewx[1345] DEBUG weewx.drivers.fousb: get 4079
>>>> records since 2024-06-24 15:52:30
>>>> Jun 24 16:57:47 weepi weewx[1345] INFO weewx.drivers.fousb:
>>>> synchronising to the weather station (quality=1)
>>>> Jun 24 16:57:48 weepi weewx[1345] DEBUG weewx.drivers.fousb: status
>>>> {'rain_overflow': 0, 'lost_connection': 0, 'unknown': 0} (0)
>>>> Jun 24 16:58:05 weepi weewx[1345] DEBUG weewx.drivers.fousb: new data
>>>> Jun 24 16:58:05 weepi weewx[1345] DEBUG weewx.drivers.fousb: setting
>>>> sensor clock 29.5306
>>>> Jun 24 16:58:05 weepi weewx[1345] DEBUG weewx.drivers.fousb: live
>>>> synchronised
>>>> Jun 24 16:58:05 weepi weewx[1345] DEBUG weewx.drivers.fousb: packet
>>>> timestamp is 15:58:05
>>>>
>>>> Thanks in advance
>>>> Mike
>>>>
>>>> On Monday, June 24, 2024 at 2:05:37 PM UTC+1 michael.k...@gmx.at wrote:
>>>>
>>>>> Maybe this sections will help you:
>>>>> https://github.com/weewx/weewx/wiki/Understanding-permissions#how-to-fix-device-permissions
>>>>>
>>>>> mike.t...@noworries.plus.com schrieb am Montag, 24. Juni 2024 um
>>>>> 14:27:38 UTC+2:
>>>>>
>>>>>> Hi,
>>>>>> I've worked my way through the upgrade steps following
>>>>>> https://github.com/weewx/weewx/wiki/v5-upgrade and got to step 4
>>>>>> weewxd --config=/home/weewx/weewx.conf
>>>>>>
>>>>>> running as pi I get the error
>>>>>> weepi weewxd[17081]: CRITICAL weewxd: Unable to load driver: [Errno
>>>>>> 13] Access denied (insufficient permissions)
>>>>>>
>>>>>> I have changed the file ownership as per step 2 and everything under
>>>>>> /weewx/home/ looks to have pi as the owner
>>>>>>
>>>>>> if I sudo weewxd if does run without the driver error. I get a
>>>>>> different error "TypeError: 'NoneType' object is not callable" but weew
>>>>>> is
>>>>>> running and updating.
>>>>>>
>>>>>> I have to confess I'm I'm not sure where to look to spot the
>>>>>> incorrect privilege.
>>>>>>
>>>>>> I'm using a RPI4 and Fine Offset weather station.
>>>>>>
>>>>>> Thanks
>>>>>> Mike
>>>>>>
>>>>>> _____________________________________________________________________________________
>>>>>> Jun 24 13:17:01 weepi CRON[17056]: (root) CMD ( cd / && run-parts
>>>>>> --report /etc/cron.hourly)
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: INFO weewxd: Initializing weewxd
>>>>>> version 5.0.2
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: INFO weewxd: Command line:
>>>>>> /home/pi/weewx-venv/bin/weewxd --config=/home/weewx/weewx.conf
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: INFO weewxd: Using Python 3.7.3
>>>>>> (default, Jan 22 2021, 20:04:44) #012[GCC 8.3.0]
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: INFO weewxd: Located at
>>>>>> /home/pi/weewx-venv/bin/python3
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: INFO weewxd: Platform
>>>>>> Linux-5.10.63-v7l+-armv7l-with-debian-10.11
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: INFO weewxd: Locale: 'en_GB'
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: INFO weewxd: Entry path:
>>>>>> /home/pi/weewx-venv/lib/python3.7/site-packages/weewxd.py
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: INFO weewxd: WEEWX_ROOT:
>>>>>> /home/weewx
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: INFO weewxd: Configuration file:
>>>>>> /home/weewx/weewx.conf
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: INFO weewxd: User module:
>>>>>> /home/weewx/bin/user
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: INFO weewxd: Debug: 0
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: INFO weewx.engine: Loading
>>>>>> station type FineOffsetUSB (weewx.drivers.fousb)
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: INFO weewx.drivers.fousb: driver
>>>>>> version is 1.3
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: INFO weewx.drivers.fousb:
>>>>>> polling mode is PERIODIC
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: INFO weewx.drivers.fousb:
>>>>>> polling interval is 60
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: INFO weewx.drivers.fousb: found
>>>>>> station on USB bus= device=
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.drivers.fousb:
>>>>>> Unable to claim USB interface 0: [Errno 13] Access denied (insufficient
>>>>>> permissions)
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: ERROR weewx.engine: Import of
>>>>>> driver failed: [Errno 13] Access denied (insufficient permissions)
>>>>>> (<class
>>>>>> 'weewx.WeeWxIOError'>)
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> Traceback (most recent call last):
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> File
>>>>>> "/home/pi/weewx-venv/lib/python3.7/site-packages/weewx/drivers/fousb.py",
>>>>>>
>>>>>> line 1036, in openPort
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> self.devh.claimInterface(self.usb_interface)
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> File "/home/pi/weewx-venv/lib/python3.7/site-packages/usb/legacy.py",
>>>>>> line 232, in claimInterface
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> util.claim_interface(self.dev, interface)
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> File "/home/pi/weewx-venv/lib/python3.7/site-packages/usb/util.py",
>>>>>> line
>>>>>> 207, in claim_interface
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> device._ctx.managed_claim_interface(device, interface)
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> File "/home/pi/weewx-venv/lib/python3.7/site-packages/usb/core.py",
>>>>>> line
>>>>>> 113, in wrapper
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> return f(self, *args, **kwargs)
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> File "/home/pi/weewx-venv/lib/python3.7/site-packages/usb/core.py",
>>>>>> line
>>>>>> 170, in managed_claim_interface
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> self.managed_open()
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> File "/home/pi/weewx-venv/lib/python3.7/site-packages/usb/core.py",
>>>>>> line
>>>>>> 113, in wrapper
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> return f(self, *args, **kwargs)
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> File "/home/pi/weewx-venv/lib/python3.7/site-packages/usb/core.py",
>>>>>> line
>>>>>> 131, in managed_open
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> self.handle = self.backend.open_device(self.dev)
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> File
>>>>>> "/home/pi/weewx-venv/lib/python3.7/site-packages/usb/backend/libusb1.py",
>>>>>>
>>>>>> line 804, in open_device
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> return _DeviceHandle(dev)
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> File
>>>>>> "/home/pi/weewx-venv/lib/python3.7/site-packages/usb/backend/libusb1.py",
>>>>>>
>>>>>> line 652, in __init__
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> _check(_lib.libusb_open(self.devid, byref(self.handle)))
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> File
>>>>>> "/home/pi/weewx-venv/lib/python3.7/site-packages/usb/backend/libusb1.py",
>>>>>>
>>>>>> line 604, in _check
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> raise USBError(_strerror(ret), ret, _libusb_errno[ret])
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> usb.core.USBError: [Errno 13] Access denied (insufficient permissions)
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> During handling of the above exception, another exception occurred:
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> Traceback (most recent call last):
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> File
>>>>>> "/home/pi/weewx-venv/lib/python3.7/site-packages/weewx/engine.py",
>>>>>> line 115, in setupStation
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> self.console = loader_function(config_dict, self)
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> File
>>>>>> "/home/pi/weewx-venv/lib/python3.7/site-packages/weewx/drivers/fousb.py",
>>>>>>
>>>>>> line 232, in loader
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> return FineOffsetUSB(**config_dict[DRIVER_NAME])
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> File
>>>>>> "/home/pi/weewx-venv/lib/python3.7/site-packages/weewx/drivers/fousb.py",
>>>>>>
>>>>>> line 967, in __init__
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> self.openPort()
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> File
>>>>>> "/home/pi/weewx-venv/lib/python3.7/site-packages/weewx/drivers/fousb.py",
>>>>>>
>>>>>> line 1040, in openPort
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> raise weewx.WeeWxIOError(e)
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewx.engine: ****
>>>>>> weewx.WeeWxIOError: [Errno 13] Access denied (insufficient permissions)
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewxd: Unable to load
>>>>>> driver: [Errno 13] Access denied (insufficient permissions)
>>>>>> Jun 24 13:17:05 weepi weewxd[17081]: CRITICAL weewxd: ****
>>>>>> Exiting...
>>>>>>
>>>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/2596d2fd-1161-46bc-afa1-1e7d54e179bcn%40googlegroups.com.
