That'S OK, don't care too much about the grey parts, they are only to illustrate, where to put the other stuff. Status = 3 means you have a config error. I take from the error message that you've put the config snippet into a wrong location. The brackets [ ] represent the nesting depth of your configuration items. Dir you really put only the bold, black parts from above below [[SeasonsReport]]?
Russell Harris schrieb am Donnerstag, 31. Juli 2025 um 00:02:43 UTC+2: > Michael, Problems! > > In weewx.conf for weewx 5.1.0, under [[SeasonsReport]] there is no line: > > HTML_ROOT = /var/www/html/weewx5/seasons > > But, earlier, under [StdReport] there is the line: > > HTML_ROOT = /var/www/html/weewx > > And from the status file, what is an exit of status=3 ? > > RLH > > > On Wed, Jul 30, 2025 at 5:24 PM '[email protected]' via weewx-user > <[email protected]> wrote: > > > > To add a plot for the rain rate, in your weewx.conf, add to the existing > "StdReport/SeasonsReport" (The grey colored parts should already exist, add > the black bold parts) > > > > [StdReport] > > > > [[SeasonsReport]] > > # The SeasonsReport uses the 'Seasons' skin, which contains the > > # images, templates and plots for the report. > > skin = Seasons > > enable = true > > HTML_ROOT = /var/www/html/weewx5/seasons > > > > [[[DisplayOptions]]] > > plot_groups = barometer, tempdew, tempfeel, hum, wind, winddir, windvec, > rain, rainRate, ET, UV, radiation, lightning, tempin, humin, tempext, > humext, tempext2, humext2, templeaf, wetleaf, tempsoil, moistsoil, pm > > > > [[[ImageGenerator]]] > > [[[[day_images]]]] > > [[[[[[rainRate]]]]]] > > > > [[[[week_images]]]] > > [[[[[weekrainRate]]]]] > > [[[[[[rainRate]]]]]] > > > > [[[[month_images]]]] > > [[[[[monthrainRate]]]]] > > [[[[[[rainRate]]]]]] > > > > [[[[year_images]]]] > > [[[[[yearrainRate]]]]] > > [[[[[[rainRate]]]]]] > > > > [email protected] schrieb am Mittwoch, 30. Juli 2025 um 10:18:32 UTC+2: > >> > >> I shall be watching! > >> > >> This month I replaced all the Davis electronics (except the console), > after hours of troubleshooting with Davis Support failed to isolate the > problem. The refurbished Davis system has been running for a week now, and > I cannot help but be a bit paranoid. However, the recent outage is the only > one in six or seven years of service. In addition to the ISS, the system > has a Sensor Transmitter for the wind station (at 33 foot elevation) and a > Repeater. > >> > >> Meanwhile, my weather website has been idle, and I changed hosting > service. So I decided this was a good time to upgrade from weewx 4 to weewx > 5. > >> > >> Again, thanks. > >> > >> RLH > >> On Wednesday, July 30, 2025 at 7:55:01 AM UTC [email protected] > wrote: > >>> > >>> I am pretty confident that someone here is having a rainRate plot > generated, using the "Season" skin and can provide a configuration snippet. > If not, I can do this some time later this week. Until then, reading the > referenced docs should enable you placing the snippet into the right > position. > >>> > >>> [email protected] schrieb am Mittwoch, 30. Juli 2025 um 09:42:11 > UTC+2: > >>>> > >>>> I thank you for the encouragement and reference, Michael. I shall > give it a try. (Perhaps my motivation is vanity, so that I can boast, "It > rained harder at my place than it did at yours.") > >>>> > >>>> RLH > >>>> > >>>> On Wednesday, July 30, 2025 at 7:35:41 AM UTC [email protected] > wrote: > >>>>> > >>>>> You can solve this without programming anything, simply by > configuration. And of course you modified your installation, at least by > entering values during the installation, when prompted. > >>>>> The customization you would like to do requires manual actions, > editing a Section of the "Seasons" skin. > >>>>> > >>>>> A first read: https://weewx.com/docs/5.1/custom/custom-reports/ > >>>>> > >>>>> For your needs it boils down to adding and enabling a plot for > rainRate for day/week/month/year, which is not predefined in skin.conf of > "Seasons". > >>>>> > >>>>> [email protected] schrieb am Mittwoch, 30. Juli 2025 um 09:14:11 > UTC+2: > >>>>>> > >>>>>> -------------------------------------------------------- > >>>>>> Graham Eddy - rainRate, like rain, is an obstype with a tag for > >>>>>> cheetah templates > >>>>>> > >>>>>> [email protected] - It's all there. Simply configure your WeeWX > >>>>>> installation to do so. How? That depends very much on your > particular > >>>>>> installation. > >>>>>> ------------------------------------------------------- > >>>>>> I am afraid that the project is beyond my programming ability. > Perhaps I could pay someone to do the work. > >>>>>> > >>>>>> My installation has no modification; it is a Davis Vantage Pro2 > with the old LCD console and USB-interface data logger. > >>>>>> > >>>>>> www.alysonwonderland.org > >>>>>> > >>>>>> > >>>>>> On Wednesday, July 30, 2025 at 5:21:14 AM UTC Graham Eddy wrote: > >>>>>>> > >>>>>>> rainRate, like rain, is an obstype with a tag for cheetah templates > >>>>>>> ⊣GE⊢ > >>>>>>> > >>>>>>> On 30 Jul 2025, at 3:16 pm, '[email protected]' via weewx-user < > [email protected]> wrote: > >>>>>>> > >>>>>>> It's all there. Simply configure your WeeWX installation to do so. > How? That depends very much on your particular installation. > >>>>>>> > >>>>>>> Russell Harris schrieb am Mittwoch, 30. Juli 2025 um 06:18:57 > UTC+2: > >>>>>>>> > >>>>>>>> A few weeks ago, we had rain which my Davis Vantage Pro2 reported > falling at over seven inches per hour, but after a five or ten minutes the > rate subsided to a much lower rate. > >>>>>>>> > >>>>>>>> Regrettably, the Vantage Pro2 does not record rain rates, but > merely reports the instantaneous value. It would be nice for weewx to > report rain rate in the same manner (graphical) as wind speed or > temperature is reported. > >>>>>>>> > >>>>>>>> RLH > >>>>>>> > >>>>>>> > >>>>>>> -- > >>>>>>> You received this message because you are subscribed to the Google > Groups "weewx-user" group. > >>>>>>> To unsubscribe from this group and stop receiving emails from it, > send an email to [email protected]. > >>>>>>> To view this discussion visit > https://groups.google.com/d/msgid/weewx-user/20086919-323e-46b3-b111-0946eda83643n%40googlegroups.com > . > >>>>>>> > >>>>>>> > > -- > > You received this message because you are subscribed to the Google > Groups "weewx-user" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected]. > > To view this discussion visit > https://groups.google.com/d/msgid/weewx-user/ae4b20b3-3dc4-4c3f-af48-22d5b19fbf63n%40googlegroups.com > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/6db886b7-fadc-422b-92fc-4fe0777421b5n%40googlegroups.com.
