My previous Post got deleted, sometimes Google Groups acts weird. Retry:

I made a mistake although I tested the config locally, above, I pasted the 
config with a missing line. It shouuld looks like this:

# BEGIN Rain Rate


        [[[DisplayOptions]]]
            plot_groups = barometer, tempdew, tempfeel, hum, wind, winddir, 
windvec, rain, rainRate, ET, UV, radiation, lightning, tempin, humin, 
tempext, humext, tempext2, humext2, templeaf, wetleaf, tempsoil, moistsoil, 
pm

        [[[ImageGenerator]]]
            [[[[day_images]]]]
*                [[[[[dayrainRate]]]]]*
                    [[[[[[rainRate]]]]]]

            [[[[week_images]]]]
                [[[[[weekrainRate]]]]]
                    [[[[[[rainRate]]]]]]

            [[[[month_images]]]]
                [[[[[monthrainRate]]]]]
                    [[[[[[rainRate]]]]]]
                   
            [[[[year_images]]]]
                [[[[[yearrainRate]]]]]
                    [[[[[[rainRate]]]]]]

# END Rain Rate

Russell Harris schrieb am Donnerstag, 31. Juli 2025 um 07:50:24 UTC+2:

> Michael,
>
> Here is your list of plot_groups:
>
> plot_groups = barometer, tempdew, tempfeel, hum, wind, winddir,
> windvec, rain, rainRate, ET, UV, radiation, lightning, tempin, humin,
> tempext, humext, tempext2, humext2, templeaf, wetleaf, tempsoil,
> moistsoil, pm
>
> But my installation of weewx shows only the following graphs:
>
> barometer, tempdew, tempfeel, hum, wind, winddir, windvec, rain, ET,
> tempin, humin
>
> Is that what is causing the error?
>
> RLH
>
> On Thu, Jul 31, 2025 at 3:36 AM '[email protected]' via weewx-user
> <[email protected]> wrote:
> >
> > That'S OK, don't care too much about the grey parts, they are only to 
> illustrate, where to put the other stuff.
> > Status = 3 means you have a config error. I take from the error message 
> that you've put the config snippet into a wrong location. The brackets [ ] 
> represent the nesting depth of your configuration items. Dir you really put 
> only the bold, black parts from above below [[SeasonsReport]]?
> >
> > Russell Harris schrieb am Donnerstag, 31. Juli 2025 um 00:02:43 UTC+2:
> >>
> >> Michael, Problems!
> >>
> >> In weewx.conf for weewx 5.1.0, under [[SeasonsReport]] there is no line:
> >>
> >> HTML_ROOT = /var/www/html/weewx5/seasons
> >>
> >> But, earlier, under [StdReport] there is the line:
> >>
> >> HTML_ROOT = /var/www/html/weewx
> >>
> >> And from the status file, what is an exit of status=3 ?
> >>
> >> RLH
> >>
> >>
> >> On Wed, Jul 30, 2025 at 5:24 PM '[email protected]' via weewx-user
> >> <[email protected]> wrote:
> >> >
> >> > To add a plot for the rain rate, in your weewx.conf, add to the 
> existing "StdReport/SeasonsReport" (The grey colored parts should already 
> exist, add the black bold parts)
> >> >
> >> > [StdReport]
> >> >
> >> > [[SeasonsReport]]
> >> > # The SeasonsReport uses the 'Seasons' skin, which contains the
> >> > # images, templates and plots for the report.
> >> > skin = Seasons
> >> > enable = true
> >> > HTML_ROOT = /var/www/html/weewx5/seasons
> >> >
> >> > [[[DisplayOptions]]]
> >> > plot_groups = barometer, tempdew, tempfeel, hum, wind, winddir, 
> windvec, rain, rainRate, ET, UV, radiation, lightning, tempin, humin, 
> tempext, humext, tempext2, humext2, templeaf, wetleaf, tempsoil, moistsoil, 
> pm
> >> >
> >> > [[[ImageGenerator]]]
> >> > [[[[day_images]]]]
> >> > [[[[[[rainRate]]]]]]
> >> >
> >> > [[[[week_images]]]]
> >> > [[[[[weekrainRate]]]]]
> >> > [[[[[[rainRate]]]]]]
> >> >
> >> > [[[[month_images]]]]
> >> > [[[[[monthrainRate]]]]]
> >> > [[[[[[rainRate]]]]]]
> >> >
> >> > [[[[year_images]]]]
> >> > [[[[[yearrainRate]]]]]
> >> > [[[[[[rainRate]]]]]]
> >> >
> >> > [email protected] schrieb am Mittwoch, 30. Juli 2025 um 10:18:32 
> UTC+2:
> >> >>
> >> >> I shall be watching!
> >> >>
> >> >> This month I replaced all the Davis electronics (except the 
> console), after hours of troubleshooting with Davis Support failed to 
> isolate the problem. The refurbished Davis system has been running for a 
> week now, and I cannot help but be a bit paranoid. However, the recent 
> outage is the only one in six or seven years of service. In addition to the 
> ISS, the system has a Sensor Transmitter for the wind station (at 33 foot 
> elevation) and a Repeater.
> >> >>
> >> >> Meanwhile, my weather website has been idle, and I changed hosting 
> service. So I decided this was a good time to upgrade from weewx 4 to weewx 
> 5.
> >> >>
> >> >> Again, thanks.
> >> >>
> >> >> RLH
> >> >> On Wednesday, July 30, 2025 at 7:55:01 AM UTC [email protected] 
> wrote:
> >> >>>
> >> >>> I am pretty confident that someone here is having a rainRate plot 
> generated, using the "Season" skin and can provide a configuration snippet. 
> If not, I can do this some time later this week. Until then, reading the 
> referenced docs should enable you placing the snippet into the right 
> position.
> >> >>>
> >> >>> [email protected] schrieb am Mittwoch, 30. Juli 2025 um 09:42:11 
> UTC+2:
> >> >>>>
> >> >>>> I thank you for the encouragement and reference, Michael. I shall 
> give it a try. (Perhaps my motivation is vanity, so that I can boast, "It 
> rained harder at my place than it did at yours.")
> >> >>>>
> >> >>>> RLH
> >> >>>>
> >> >>>> On Wednesday, July 30, 2025 at 7:35:41 AM UTC [email protected] 
> wrote:
> >> >>>>>
> >> >>>>> You can solve this without programming anything, simply by 
> configuration. And of course you modified your installation, at least by 
> entering values during the installation, when prompted.
> >> >>>>> The customization you would like to do requires manual actions, 
> editing a Section of the "Seasons" skin.
> >> >>>>>
> >> >>>>> A first read: https://weewx.com/docs/5.1/custom/custom-reports/
> >> >>>>>
> >> >>>>> For your needs it boils down to adding and enabling a plot for 
> rainRate for day/week/month/year, which is not predefined in skin.conf of 
> "Seasons".
> >> >>>>>
> >> >>>>> [email protected] schrieb am Mittwoch, 30. Juli 2025 um 09:14:11 
> UTC+2:
> >> >>>>>>
> >> >>>>>> --------------------------------------------------------
> >> >>>>>> Graham Eddy - rainRate, like rain, is an obstype with a tag for
> >> >>>>>> cheetah templates
> >> >>>>>>
> >> >>>>>> [email protected] - It's all there. Simply configure your 
> WeeWX
> >> >>>>>> installation to do so. How? That depends very much on your 
> particular
> >> >>>>>> installation.
> >> >>>>>> -------------------------------------------------------
> >> >>>>>> I am afraid that the project is beyond my programming ability. 
> Perhaps I could pay someone to do the work.
> >> >>>>>>
> >> >>>>>> My installation has no modification; it is a Davis Vantage Pro2 
> with the old LCD console and USB-interface data logger.
> >> >>>>>>
> >> >>>>>> www.alysonwonderland.org
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> On Wednesday, July 30, 2025 at 5:21:14 AM UTC Graham Eddy wrote:
> >> >>>>>>>
> >> >>>>>>> rainRate, like rain, is an obstype with a tag for cheetah 
> templates
> >> >>>>>>> ⊣GE⊢
> >> >>>>>>>
> >> >>>>>>> On 30 Jul 2025, at 3:16 pm, '[email protected]' via 
> weewx-user <[email protected]> wrote:
> >> >>>>>>>
> >> >>>>>>> It's all there. Simply configure your WeeWX installation to do 
> so. How? That depends very much on your particular installation.
> >> >>>>>>>
> >> >>>>>>> Russell Harris schrieb am Mittwoch, 30. Juli 2025 um 06:18:57 
> UTC+2:
> >> >>>>>>>>
> >> >>>>>>>> A few weeks ago, we had rain which my Davis Vantage Pro2 
> reported falling at over seven inches per hour, but after a five or ten 
> minutes the rate subsided to a much lower rate.
> >> >>>>>>>>
> >> >>>>>>>> Regrettably, the Vantage Pro2 does not record rain rates, but 
> merely reports the instantaneous value. It would be nice for weewx to 
> report rain rate in the same manner (graphical) as wind speed or 
> temperature is reported.
> >> >>>>>>>>
> >> >>>>>>>> RLH
> >> >>>>>>>
> >> >>>>>>>
> >> >>>>>>> --
> >> >>>>>>> You received this message because you are subscribed to the 
> Google Groups "weewx-user" group.
> >> >>>>>>> To unsubscribe from this group and stop receiving emails from 
> it, send an email to [email protected].
> >> >>>>>>> To view this discussion visit 
> https://groups.google.com/d/msgid/weewx-user/20086919-323e-46b3-b111-0946eda83643n%40googlegroups.com
> .
> >> >>>>>>>
> >> >>>>>>>
> >> > --
> >> > You received this message because you are subscribed to the Google 
> Groups "weewx-user" group.
> >> > To unsubscribe from this group and stop receiving emails from it, 
> send an email to [email protected].
> >> > To view this discussion visit 
> https://groups.google.com/d/msgid/weewx-user/ae4b20b3-3dc4-4c3f-af48-22d5b19fbf63n%40googlegroups.com
> .
> >
> > --
> > You received this message because you are subscribed to the Google 
> Groups "weewx-user" group.
> > To unsubscribe from this group and stop receiving emails from it, send 
> an email to [email protected].
> > To view this discussion visit 
> https://groups.google.com/d/msgid/weewx-user/6db886b7-fadc-422b-92fc-4fe0777421b5n%40googlegroups.com
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion visit 
https://groups.google.com/d/msgid/weewx-user/d543e2a8-288a-4893-a732-45eabfded5adn%40googlegroups.com.

Reply via email to