Dear Mauro, Yes we have installed those prerequsite package but still failed. We have tried the PA-RISC depot and it works although we are using Itanium platform. We have tried another development machine and the result is the same. So I suspect the depot information should be incorrect. Regards, Ting
________________________________ From: Mauro Tortonesi [mailto:[EMAIL PROTECTED] Sent: 1/3/2007 [Wed] 17:58 To: Chung Ting Cheng (HIT, ODT) Cc: [EMAIL PROTECTED] Subject: Re: wget problem [EMAIL PROTECTED] wrote: > Dear Sir, > > I have installed wget 1.10.2 into HP-UX 11.23 from > http://hpux.cs.utah.edu/hppd/hpux/Gnu/wget-1.10.2/. Also I have installed the > runtime dependency packages like libgcc, gettext, libiconv and openssl. > However when I run this and get some testing web content. The following > errors is prompted. > > # wget http://10.1.1.15 > --12:46:00-- http://10.1.1.15/ > => `index.html' > Connecting to 10.1.1.15:80... connected. > HTTP request sent, awaiting response... 200 OK > /usr/lib/hpux32/dld.so: Unsatisfied code symbol '__umodsi3' in load module > '/usr/local/bin/wget'. > Killed > > Could you please help to tell me what's wrong on the issue? Thanks. hi cheng, i am not an expert of HP UX, but it seems you have a broken installation. are you sure you correctly installed all the required dependencies: libgcc gettext libiconv openssl (in particular libgcc)? -- Aequam memento rebus in arduis servare mentem... Mauro Tortonesi http://www.tortonesi.com University of Ferrara - Dept. of Eng. http://www.ing.unife.it GNU Wget - HTTP/FTP file retrieval tool http://www.gnu.org/software/wget Deep Space 6 - IPv6 for Linux http://www.deepspace6.net Ferrara Linux User Group http://www.ferrara.linux.it The message represents the personal views and opinion of the individual sender and under no circumstances represents those of Hutchison Port Holdings Limited ("HPH") or its Group Companies. The shareholders, directors and management of HPH and any of its Group Companies accept no responsibility and accordingly shall have no liability to any party whatsoever with respect to the contents of this message. This message (including any attachments) is intended only for the use of the addressee(s) named above. It may contain information that is PRIVILEGED and CONFIDENTIAL and should not be read, copied or otherwise used by any other person. If you are not the intended recipient, you are hereby notified that any use, retention, disclosure, copying, printing, forwarding or dissemination of this communication is strictly prohibited. If you have received this communication in error, please erase all copies of the message and its attachments and notify us immediately.