[WhatsUp Forum] SNMP Traps

[Steven Williams]

Hi,   I have looked at the doco and Ipswitch support site, but are having no luck getting Whatsup to email me when an ISDN service connects or drops off.   I have complied the Cisco ISDN mibs into Whatsup using the mib extractor, and I receive the traps in the log file for my device, but I cant seem to get an email alert to work.   The trap is as follows; 20020219 134125 SNMP 203.2.132.226 Trap(ciscoIsdnMibTrapPrefix-6.2) demandNbrLogIf.19.1=21 demandNbrName.19.1=ausagm01 demandNbrLastDuration.19.1=75 demandNbrClearReason.19.1="Normal call clearing" demandNbrClearCode.19.1=0x10 demandNbrEntry.17.19.1=2   The traps.txt files has the following;   isdnMibCallInformation,isdnMibTraps,6,1 demandNbrCallInformation,ciscoIsdnMibTrapPrefix,6,1 ISDN,cisco.9.26.2-6.2,0,0   I have tried putting 6.1 in the On SNMP Traps section in the alert configuration screen, but doesn't work. The email address has been tested ok.   Any tips?   Thanks   Steve --- This email and any files transmitted with it are solely intended for the use of the addressee(s) and may contain information that is confidential and privileged. If you receive this email in error, please advise us by return email immediately. Please also disregard the contents of the email, delete it and destroy any copies immediately. Computershare Limited and its subsidiaries do not accept liability for the views expressed in the email or for the consequences of any computer viruses that may be transmitted with this email This email is also subject to copyright. No part of it should be reproduced, adapted or transmitted without the written consent of the copyright owner.