I believe, (but not entirely sure) that if you get the qualifier mib but no value, that it is not supported on that particular model and particular software version. I run into that on some of my APC UPS. I would suggest you contact Liebert and verify
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Friday, August 16, 2002 10:47 AM To: [EMAIL PROTECTED] Subject: RE: [WhatsUp Forum] monitoring service on Liebert UPS Thanks for the response, Robert. When I drill down in the MIB to UPS AlarmUtilFailed, and then do a get, it doesn't show an "equals" value. It simply displays UPSAlarmUtilFailed. If, when selecting the item in the MIB, I also insert an instance value (0 or 1), and then do the get, it displays UPSAlarmUtilFailed.0 or UPSAlarmUtilFailed.1, but no "equals" value. I'm still at a loss........... Chris Powers Systems Engineer MCSE, CNA, Network+, A+ Keane IT Technical Services (617) 517-1730 "Glatt, Robert" <[EMAIL PROTECTED]> To: "'[EMAIL PROTECTED]'" Sent by: <[EMAIL PROTECTED]> [EMAIL PROTECTED] cc: switch.com Subject: RE: [WhatsUp Forum] monitoring service on Liebert UPS 08/16/2002 08:06 AM Please respond to WhatsUp_Forum when you go into nettools and get the value of the mib what does it give you?? Put that in your service as the equal to value for up. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 15, 2002 4:47 PM To: [EMAIL PROTECTED] Subject: [WhatsUp Forum] monitoring service on Liebert UPS Hi, people. I'm not sure if I need assistance from Ipswitch or from Liebert on this, so I'll put it out there for both......... Got a Liebert 300 UPS with SNMP card configured to point to my WhatsUp Gold server (ver. 7.03). I configured a service called LiebertAlarmUtilityFailed, of service type "SNMP monitoring". Here it is: (Embedded image moved to file: pic19629.pcx) The last digit (.0) of the object ID number represents the "instance" that I selected after traversing the Liebert MIB tree to lcUPSAlarm/lcUPSAlarmConditions/lcUPSAlarmUtilFailed. I've tried all combinations of value 0 or 1 and host is UP or DOWN. But every time I poll the device, it reports the service as down. Anybody know what configuration changes I need to make to make this service report as UP? Every Tuesday morning at my workplace, the outside generator performs a test and turns on and takes over our power, so that is my real-time test that I can use to see if the service is correctly reporting as down. Thanks much.......... Chris Powers Systems Engineer MCSE, CNA, Network+, A+ Keane IT Technical Services Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
