did you have any dependencies on the mib you installed, I am currently
doign the same thing, and I have to find a third party mib to satisfy a
dependancy for the liebert mibs.... hope this helps
Travis Conley
Network Administrator
LeasePlan USA
(678) 202-8738
"Glatt, Robert"
<[EMAIL PROTECTED]> To:
"'[EMAIL PROTECTED]'"
Sent by:
<[EMAIL PROTECTED]>
[EMAIL PROTECTED] cc:
switch.com Subject: RE: [WhatsUp Forum]
monitoring service on Liebert UPS
08/16/2002 11:28 AM
Please respond to
WhatsUp_Forum
I believe, (but not entirely sure) that if you get the qualifier mib but no
value, that it is not supported on that particular model and particular
software version. I run into that on some of my APC UPS. I would suggest
you
contact Liebert and verify
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]
Sent: Friday, August 16, 2002 10:47 AM
To: [EMAIL PROTECTED]
Subject: RE: [WhatsUp Forum] monitoring service on Liebert UPS
Thanks for the response, Robert.
When I drill down in the MIB to UPS AlarmUtilFailed, and then do a get, it
doesn't show an "equals" value. It simply displays UPSAlarmUtilFailed.
If, when selecting the item in the MIB, I also insert an instance value (0
or 1), and then do the get, it displays UPSAlarmUtilFailed.0 or
UPSAlarmUtilFailed.1, but no "equals" value. I'm still at a
loss...........
Chris Powers
Systems Engineer
MCSE, CNA, Network+, A+
Keane IT Technical Services
(617) 517-1730
"Glatt, Robert"
<[EMAIL PROTECTED]> To:
"'[EMAIL PROTECTED]'"
Sent by:
<[EMAIL PROTECTED]>
[EMAIL PROTECTED] cc:
switch.com Subject: RE:
[WhatsUp Forum] monitoring service on Liebert UPS
08/16/2002 08:06 AM
Please respond to
WhatsUp_Forum
when you go into nettools and get the value of the mib what does it give
you?? Put that in your service as the equal to value for up.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 15, 2002 4:47 PM
To: [EMAIL PROTECTED]
Subject: [WhatsUp Forum] monitoring service on Liebert UPS
Hi, people.
I'm not sure if I need assistance from Ipswitch or from Liebert on this, so
I'll put it out there for both.........
Got a Liebert 300 UPS with SNMP card configured to point to my WhatsUp Gold
server (ver. 7.03). I configured a service called
LiebertAlarmUtilityFailed, of service type "SNMP monitoring". Here it is:
(Embedded image moved to file: pic19629.pcx)
The last digit (.0) of the object ID number represents the "instance" that
I selected after traversing the Liebert MIB tree to
lcUPSAlarm/lcUPSAlarmConditions/lcUPSAlarmUtilFailed.
I've tried all combinations of value 0 or 1 and host is UP or DOWN. But
every time I poll the device, it reports the service as down. Anybody know
what configuration changes I need to make to make this service report as
UP? Every Tuesday morning at my workplace, the outside generator performs
a test and turns on and takes over our power, so that is my real-time test
that I can use to see if the service is correctly reporting as down.
Thanks much..........
Chris Powers
Systems Engineer
MCSE, CNA, Network+, A+
Keane IT Technical Services
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
--------------------------------------------------------------------------------------------------------------------
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake, please notify the
sender by return e-mail and delete this message from your system.
Any unauthorized use or dissemination of this message in whole or in
part is strictly prohibited. Please note that e-mails are susceptible
to change. LeasePlan USA - A Subsidiary of ABN AMRO Lease Holding
(including its group companies) shall not be responsible nor liable
for the proper and complete transmission of the information contained
in this communication nor for any delay in its receipt or damage to
your system. LeasePlan USA - A Subsidiary of ABN AMRO Lease Holding
(or its group companies) does not guarantee that the integrity of
this communication has been maintained nor that this communication is
free of viruses, interceptions or interference.
--------------------------------------------------------------------------------------------------------------------
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
