Do you have the correct SNMP community strings in WUG?  Do you have an SNMP
ACL on the switch?

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Thanks,

Steve Busby
Information Technology Services
University of Nebraska Medical Center
985030 Nebraska Medical Center
[EMAIL PROTECTED]
402.559.9621

If Linux doesn't have the solution, you have the wrong problem.

***************University of Nebraska Medical Center E-mail Confidentiality
Disclaimer ***************
 The information in this e-mail is privileged and confidential, intended
only for the use of the addressee(s) above.
 Any unauthorized use or disclosure of this information is prohibited. If
you have received this e-mail by mistake
 please delete it and immediately contact the sender.


                                                                           
             "Roberts Phillip                                              
             (IBM)"                                                        
             <phillip.roberts@                                          To 
             thomson.net>              <[EMAIL PROTECTED]>   
             Sent by:                                                   cc 
             WhatsUp_Forum-own                                             
             [EMAIL PROTECTED]                                     Subject 
             com                       [WhatsUp Forum] Auto Discover       
                                                                           
                                                                           
             10/16/2003 09:37                                              
             AM                                                            
                                                                           
                                                                           
             Please respond to                                             
             [EMAIL PROTECTED]                                             
              t.ipswitch.com                                               
                                                                           
                                                                           




I have been trying to Auto Discover the Interfaces on a stack of 4 Nortel
450-12F's, it gets half way through the discover and fails. Why would this
be?

Thanks,

Phillip B. Roberts
Network Administrator
Thomson
Circleville Glass Operations
 24200 U.S. Route 23, South / Circleville, OH 43113-9002
Ph: 740-420-6784 (x6784) / Fx: 740-420-6511 / Cell: 740-571-1412 (x5306)  /
[EMAIL PROTECTED]

_____
Privileged/Confidential Information may be contained in this message.
If you are not the addressee indicated in this message (or responsible
for delivery of the message to such person), you may not copy or deliver
this message to anyone. In such case, you should destroy this message
and kindly notify the sender by reply email.
______



Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.

An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/



Please visit http://www.ipswitch.com/support/mailing-lists.html 
to be removed from this list.

An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/

Reply via email to