Hi Alex.
> -----Original Message-----
> From: Alex Narinsky [mailto:[EMAIL PROTECTED]
> Sent: venerdi 10 dicembre 2004 22.04
> To: [EMAIL PROTECTED]
> Subject: [WinPcap-users] error in net/mask windump specification
>
>
> From the Cisco tutorial (http://www.cisco.com/warp/public/701/3.html)
> the net mask combination "172.16.50.1 255.255.255.0" is valid.
>
> However, when I apply this combination to windump -
> windump "net 172.16.50.1 mask 255.255.255.0"
>
> I am getting the error:
> windump: non-network bits set in "172.16.50.1 mask 255.255.255.0"
What about
172.16.50.0 mask 255.255.255.0 ?
This is due to the way in use time ago to specify network/mask.
In any case, this should be reported to the tcpdump mailing list (since
WinDump is just the recompilation of tcpdump in Windows).
Cheers,
fuvlio
> Why windump rejects this net/mask? By the way tcpdump works in the same
> way.
>
> Regards,
>
> Alex
>
>
>
>
> ==================================================================
> This is the WinPcap users list. It is archived at
> http://www.mail-archive.com/winpcap-users@winpcap.polito.it/
>
> To unsubscribe use
> mailto: [EMAIL PROTECTED]
> ==================================================================
==================================================================
This is the WinPcap users list. It is archived at
http://www.mail-archive.com/winpcap-users@winpcap.polito.it/
To unsubscribe use
mailto: [EMAIL PROTECTED]
==================================================================
