Can you send the output of the debug to a syslog server?
Ron Robinson [EMAIL PROTECTED] -----Original Message----- From: Lee Badman [mailto:[EMAIL PROTECTED] Sent: Wednesday, January 03, 2007 6:41 PM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU Subject: [WIRELESS-LAN] Debug Cisco LWAPP Am working with Aironet 1500 Mesh nodes, but have seen the same problem with converted legacy APs that don't play well with controllers for whatever reason. For troubleshooting, command line debug is required at the controllers. In my case, I have 16 controllers- and there's often no obvious rhyme or reason to what controller trouble APs will try to associate to. Cisco's current answer is to open 16 command line windows- 1 for each controller- and issue multiple debug commands in each while looking for signs of trouble. This can be challenging, as these windows time out for inactivity and the process has to be repeated until the trouble is found. WCS doesn't appear to aggregate this debug data... Has anyone else found a way of dealing with this debug process when it needs to be distibuted accross a large number of controllers? Lee Badman Network/Wireless Engineer Syracuse University 315 443-3003 ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.