I'm fairly certain that, in this context, "Peer-to-peer blocking" refers to preventing wireless clients from seeing each other through the controller (at all), and not to any specific protocols or applications that those clients might be trying to run to Internet destinations. David Gillett
_____ From: Urrea, Nick [mailto:[EMAIL PROTECTED] Sent: Wednesday, January 17, 2007 8:26 AM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU Subject: Re: [WIRELESS-LAN] WISMs and Peer to Peer blocking I am also curious about P2P blocking. Does the WiSM also block Bittorent traffic to the Internet? ------ Nicholas Urrea IT Department UC Hastings College of the Law [EMAIL PROTECTED] 415-565-4718 _____ From: Ruiz, Mike [mailto:[EMAIL PROTECTED] Sent: Wednesday, January 17, 2007 5:39 AM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU Subject: Re: [WIRELESS-LAN] WISMs and Peer to Peer blocking Not having WiSM I'm curious, is the P2P blocking based on some Flow Setup Throttling technology? Mike Ruiz Michael G Ruiz Network and Systems Engineer Hobart and William Smith Colleges Information Technology Services v 315.781.3711 f 315.781.3409 From: Jake Woodhams [mailto:[EMAIL PROTECTED] Sent: Wednesday, January 17, 2007 3:17 AM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU Subject: Re: [WIRELESS-LAN] WISMs and Peer to Peer blocking Unicasting to not reveal my lurking status... :-) You wouldn't happen to be looking at clients connected across the controller boundaries would you? In other words, say AP1 is connected to WiSM controller A and AP2 is connected to WiSM controller B. Peer-to-peer blocking works on a per controller basis today, so clients connected to AP1 would be able to communicate with clients connected to AP2. - Jake On 1/16/07 11:51 PM, "Anthony Croome" <[EMAIL PROTECTED]> wrote: Hi Has anyone out there had problems with peer to peer blocking on the WISMs WLAN controllers? I originally enabled it on the two controllers, and I thought it worked. But now it doesn't seem to be working as I can happily scan away and see other wireless clients and connect to their ports. It is definitely enabled, I checked the WCS gui, each controllers GUI and each controller CLI. And they all report Peer to Peer blocking is enabled. I am running release 4.0.179.11 on the controllers. Anthony Croome QUT ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. <http://www.educause.edu/groups/> ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.