Hi Bruce- Your confusion is justified. Though I was at the Aruba conference, I am a Cisco customer. I should have put a finer point on my lament- I wish ALL controller-based wireless systems allowed for per AP settings like data rate variances.
:) Lee Lee H. Badman Wireless/Network Engineer Information Technology and Services Adjunct Instructor, iSchool Syracuse University 315 443-3003 -----Original Message----- From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU] On Behalf Of Osborne, Bruce W Sent: Wednesday, June 01, 2011 7:30 AM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU Subject: Re: [WIRELESS-LAN] Dual radio APs, .11n on 2.4ghz radios or not? OK, Lee now you have me confused. I have seen you at Aruba user conferences, so I thought you knew their product. I have heard Meru prefers a common setup for all APs on a controller (or at least they did), but I did not think you were using them. Our Aruba system lets us set data rates on an AP or AP group per SSID and the whole multi-controller system is managed from a central interface. Aruba has had these features since before we started evaluating them in late 2006. Even if you set the rated per AP group, you can customize individual APs apart from the group, This is useful if there they have only a couple of settings different from the group. I do not know how long running your beef has been, but that was solved years ago. Aruba also lets you steer clients to the 5GHz band to you can reserve the 2.4GHz band for b/g/n users. Of course, they also handle multicast video over Wi-Fi well too. Note: I am not an Aruba salesman. Just a happy customer. Bruce Osborne Wireless Network Engineer IT Network Services (434) 592-4229 LIBERTY UNIVERSITY 40 Years of Training Champions for Christ: 1971-2011 -----Original Message----- From: Lee H Badman [mailto:lhbad...@syr.edu] Sent: Tuesday, May 31, 2011 7:20 PM Subject: Re: Dual radio APs, .11n on 2.4ghz radios or not? One of my long running beefs with controller based systems is that data rates settings are per controller. Would be nice to be able to set the two APs I might need for scanners to 11b rates, while letting the other 498 do no less than 5.5. Perhaps I want too much... Sigh. This technology stuff... -Lee Badman ________________________________________ From: The EDUCAUSE Wireless Issues Constituent Group Listserv [WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU] On Behalf Of Osborne, Bruce W [bosbo...@liberty.edu] Sent: Tuesday, May 31, 2011 7:37 AM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU Subject: Re: [WIRELESS-LAN] Dual radio APs, .11n on 2.4ghz radios or not? In our 2.4 network here at Liberty, this is what we setup that works, at least for Aruba APs. Transmit Rates: Only 5.5 & higher Basic Rates: 2 & 5.5 I believe some gaming systems needed to see 2 Mbps as a basic rate, but it did not need to be transmitted. Bruce Osborne Wireless Network Engineer IT Network Services (434) 592-4229 LIBERTY UNIVERSITY 40 Years of Training Champions for Christ: 1971-2011 From: Voll, Toivo [mailto:to...@usf.edu] Sent: Friday, May 27, 2011 5:05 PM Subject: Re: Dual radio APs, .11n on 2.4ghz radios or not? We're also running into similar issues with purpose-built PDAs, of the type used to scan tickets and inventory etc. Also, I seem to recall that Nintendo DS will not associate if it doesn't see the 1 Mbps rates. How other universities are dealing with discontinuing support to existing devices would be interesting to hear - or if there's a technical solution someone has devised for this. Toivo Voll Network Administrator Information Technology Communications University of South Florida From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU] On Behalf Of Jeremy Brake Sent: Friday, May 27, 2011 16:29 To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU Subject: Re: [WIRELESS-LAN] Dual radio APs, .11n on 2.4ghz radios or not? Rick, What are you doing for Wii users? The last time I checked they required the lowest G speeds in order to associate. Please tell me they fixed it with a new code release for the Wii's.. http://www.networkworld.com/community/blog/dropping-legacy-80211-support-your-infrastruc Jeremy From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU] On Behalf Of Rick Brown Sent: Thursday, May 26, 2011 2:07 PM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU Subject: Re: [WIRELESS-LAN] Dual radio APs, .11n on 2.4ghz radios or not? Craig, Enabling N on the 2.4 is not a lost cause and will help improve performance if the coverage has been designed properly. As of June 1st we are disabling 11B and all 11G rates below 12Mbps. In order to help steer people to the 5Ghz band we have created an SSID that is only broadcast in that band and publicized it as higher performance. Rick ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1375 / Virus Database: 1509/3672 - Release Date: 05/31/11 ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.