I saw the ap radios bouncing on 7.6.120.0 as well. . Haven't seen it on 7.6.130.0 that I am aware.
<div>-------- Original message --------</div><div>From: Wyatt Schill <wsch...@greenriver.edu> </div><div>Date:03/10/2014 12:13 (GMT-06:00) </div><div>To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU </div><div>Subject: [WIRELESS-LAN] Cisco 8.0.100.0 code rollback </div><div> </div>Not sure if any others have tried out 8.0.100.0 code, but thought I’d toss out our issues with it. We are running a couple of 5508 HA pairs. The 8.0 code looked okay in testing but once load hit the controllers (starting seeing issues around 800-1000 clients per WLC), we noticed a few issues. 1. The WLC gui became unusable. The web gui became un-responsive and often partially or fully not showing pages at all. 2. 5ghz radios began bouncing. We would see 1 or 2 random WAPs an hour disable their 5ghz radio for a second and then it would come right back up. 3. On a smaller note, PI dashboard (PI2.1) shows 0mbps for wireless traffic from any controller on 8.0.100.0 We subsequently rolled back to 7.6.130 and all these issues disappeared. Hope this helps anyone else who might be looking at moving up to 8.0 -wyatt Wyatt Schill Senior Network Engineer Green River Community College 12401 SE 320th St.. Auburn, WA 98092 !DSPAM:911,542ed95692521625413072! ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.