Thanks, Adam- we have the license, and changed nothing in the WLC. It just seems that netflow isn’t showing up in the 2.2 PI, and I can’t find any reference on configuration on PI for 2.2. That’s what I’m specifically looking for.
-Lee Lee Badman | Network Architect Information Technology Services 206 Machinery Hall 120 Smith Drive Syracuse, New York 13244 t 315.443.3003 f 315.443.4325 e lhbad...@syr.edu<mailto:lhbad...@syr.edu> w its.syr.edu SYRACUSE UNIVERSITY syr.edu From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU] On Behalf Of Adam Watts Sent: Wednesday, September 02, 2015 4:15 AM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU Subject: Re: [WIRELESS-LAN] Cisco AVC reporting in PI 2.2 Lee, What licence are you running on prime? You need to have an Assurance License to access AVC stuff. As you have probably seen under the SERVICE menu there is a blank AVC section. we had it when we trialed the system but lost it when we finally licensed it as we only needed Lifecycle License for what we are doing. Adam Bristol University On 1 September 2015 at 22:20, Chad Burnham <cburn...@du.edu<mailto:cburn...@du.edu>> wrote: Lee, We have AVC working in PI 2.2.0 – our source is netflow from 2 x ASR-1006 edge Routers only. I spent a lot time trying to get it to work from SUP2T to no avail. We are using Aruba controllers and airwave on our wireless side for this function. Chad From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU<mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>] On Behalf Of Lee H Badman Sent: Tuesday, September 01, 2015 2:03 PM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU<mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU> Subject: [WIRELESS-LAN] Cisco AVC reporting in PI 2.2 As I just shared with our SE… After going to PI 2.2, we lost the ability to see AVC information in PI. It was easy to setup in 1.4 after getting the assurance licenses we needed using this: http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/115756-avc-guide-00.html And then there is this for PI 3 http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-infrastructure/solution_overview_c22-728972.html#_Toc428598044 But I can find nothing on 2.2 and the PI interface maps to neither the old or new. Any idea where I can find guidance on application reporting setup in 2.2 PI? I had no idea this was gone until I needed it, and I’m finding nothing after hours of searching. Anyone else been down this road? I have it set fine on the WLCs, just PI is typically confounding. (yes I know 3.0 is out) Thanks- Lee Lee Badman | Network Architect Information Technology Services 206 Machinery Hall 120 Smith Drive Syracuse, New York 13244 t 315.443.3003 f 315.443.4325 e lhbad...@syr.edu<mailto:lhbad...@syr.edu> w its.syr.edu<http://its.syr.edu> SYRACUSE UNIVERSITY syr.edu<http://syr.edu> ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
