We want as much capacity as possible, but certainly 10Mbps minimum. This
is for business customers only and we won't be oversubscribing the
sectors, so there isn't a need to support many subscribers per sector.
Not sure what you are asking in terms of scale, could you be more
specific? VoIP will be used across the radio links however the traffic
is encapsulated in MPLS.
-Matt
Brad Larson wrote:
Matt, How much capacity do you need per 5.8 Ghz sector? Is this a business
or residential rollout or both? How many subscribers per sector do you want
to support? How large do you want to scale this network and is managment,
batch firmware loads for radio updates, vlan tagging, voip support important
to you? Brad
-----Original Message-----
From: Matt Liotta [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 03, 2006 7:02 PM
To: WISPA General List
Subject: [WISPA] 5.8Ghz Multi-point radios
We are looking to start deploying 5.8Ghz multi-point radios at some of
our sites. I am hoping some folks on this list can share experiences and
ideas on what radios might meet our needs. We have experimented with
Canopy and Trango, but would really like some better choices. From a
specification standpoint, Canopy general meets our needs, but we don't
like being constrained on the antenna. We would like to use sectors
bigger than 60 degrees and we would like to use horizontal polarization.
We don't want to use Trango for no other reason than they can't work
with distributors. We really like the flexibility on many 802.11a-based
radios and certainly the price, but the contention aspects of the
protocol and the perception of Wi-Fi being a consumer grade technology
stop us from going that route.
Any thoughts from the list?
-Matt
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
