Because these aren't built yet, the image in my mind is for us to
stick up above the blades...meaning the windmill tower itself would
be higher than it normally would be, or we'd add an extension to make
it so. Well, maybe that's an unrealistic daydream.
Chuck
At 12:59 PM -0700 5/3/07, [EMAIL PROTECTED] wrote:
if the blades are composite or fiberglass you may get through, but the receive
jitter will probably drive the radio card nuts. If there is enough room under
the blades to see what you want to see it should be great. A piece of foam on
your board and lil rubber on antenna mounts should give you all the vibration
dampening you will need. Don't forget to reground the antenna with a wire.
There may be an unused tower too. Also over here there are standard 25g's
scattered around to transmit the controller information. Good Luck
Chuck Profito
CV-Access, Inc
209-988-7388
Quoting Mike Hammett <[EMAIL PROTECTED]>:
I would think there would be an issue with the gigantic spinning pieces of
metal.
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: "WISPA General List" <wireless@wispa.org>
Sent: Thursday, May 03, 2007 1:52 PM
Subject: [WISPA] Tilting at Windmills
> I've got a township in PA that is eager to have us expand to their area,
> which is typically quite hilly. They're asking me if we could mount on
> wind mills, which they are apparently already encouraging.
>
> Anyone have any experience with this? I can imagine problems (like
> vibration), but my imagination often runs wild...
>
> Thanks!
>
> Chuck
> --
> -----------------------
> Chuck Bartosch
> Clarity Connect, Inc.
> 200 Pleasant Grove Road
> Ithaca, NY 14850
> (607) 257-8268
>
> If at first you do succeed, try not to look astonished.
>
> --
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
-----------------------
Chuck Bartosch
Clarity Connect, Inc.
200 Pleasant Grove Road
Ithaca, NY 14850
(607) 257-8268
If at first you do succeed, try not to look astonished.
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
