I have been using the Comtelco 180s and they seem to work fine. Got them
from Electrocom.
Jory Privett
WCCS
----- Original Message -----
From: "Mac Dearman" <[EMAIL PROTECTED]>
To: "'WISPA General List'" <wireless@wispa.org>
Sent: Friday, May 18, 2007 8:26 AM
Subject: RE: [WISPA] 180* sector choices
Does anyone on list have a set of 2.4GHz 180* sector antennas they would
like to brag on? I have two towers that need to be sectored out and I am
on
the hunt. I would like to have as much gain as possible at the antenna.
Any suggestions, comments and feed back are greatly appreciated as I have
never deployed 180* sectors, but we have always used either Omni's or 3
120*
sectors. These towers are just Rohn 25G and I cant seem to get enough
separation up top for the 120* sectors. Been there done that and still
fighting the issues it causes by mounting the 3 120* sectors too close to
one another.
Thanks folks,
Mac
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/