Kurt Your just going to want to stay off the same channel as the xr9 and you will be ok.
Kurt Fankhauser wrote: > It is my understanding that the 900mhz cards are actually 2.4ghz with > converters built in. So obviously putting a 900mhz card on the same board as > a 2.4ghz card would be a bad idea. Now can I put them on the same tower? > Lets say I put the 900mhz radio at the bottom and run some coax since 900mhz > should have much less cable loss I should be able to do this. I'll leave the > 2.4 stuff up top. But will the 900mhz antenna mounted in close proximity to > the 2.4 antenna pick up the 2.4 and allow it to still cause interference to > the radio below? Also would putting a 900mhz filter before the radio solve > this? > > > > Kurt Fankhauser > WAVELINC > P.O. Box 126 > Bucyrus, OH 44820 > 419-562-6405 > www.wavelinc.com > > > > > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/