On Mon, 25 Aug 2008, Kurt Fankhauser wrote: >Has anyone else seen this problem I am seeing. On my Mikrotik sites >with Atheros AP's the interface will decide to completely dump all >of the atheros clients and then they reconnect again within 2 >seconds. You can tell this happens because the uptimes are so >short. But the prism clients they never get dumped and their >uptimes are accurate since they were last power cycled. Take a look >at this screen shot you can see the problem clearly. This is >happening on ALL of my towers that have Mikrotik AP's.
Let me guess...you are using the XR2 or XR5? This is a known issue that is especially bad with Tranzeo client radios and XR2 at the AP. As someone else mentioned, there is a lot of finger pointing going on relating to this issue. From what I can tell, this issue does not have a negative impact on Mikrotik CPE (or most other CPEs for that matter). -- ******************************************************************** *Butch Evans *Professional Network Consultation * *Network Engineering *MikroTik RouterOS * *573-276-2879 *ImageStream * *http://www.butchevans.com/ *StarOS and MORE * *http://blog.butchevans.com/ *Wired or wireless Networks * *Mikrotik Certified Consultant *Professional Technical Trainer * ******************************************************************** -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/