Allan Marsallis got really good with RTS/CTS. He tried to teach me but I never did really catch on.
I do know that you have to set ALL client radios the same way for it to work right. As I recall, it can make a huge difference on a highly loaded network though. marlon ----- Original Message ----- From: Blair Davis To: WISPA General List Sent: Thursday, October 23, 2008 10:52 PM Subject: [WISPA] RTS/CTS Hi all. I have a MiktoTik RB532A with a XR2 radio card as an AP. About 20 clients attach to this AP, some B, some G. Range varies from 1200FT to 6Miles. All clients d/l from the AP at speeds above 3Mb/s. U/l speeds vary, but cluster around 250Kb/s. This is not good. I need to improve u/l speeds. Has anyone ever reached a consensus on how to use RTS/CTS to improve u/l? Any other ideas would be helpful as well.... Blair ------------------------------------------------------------------------------ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/