We are testing a 3.65 GHz setup with MT and XR3 using a 11 dBi Omni and 14 dBi panel. My results are not really impressive with signal levels. However, In order to use 3663 MHz you must set the card for 5770 MHz and 5770 MHz is not available unless you purchase a special frequency license for each ap and cpe from MT. However someone on the list pointed out that selecting a different country other than the good old USA would allow you to select the 5770 Mhz frequency. This is true and we used the Germany 5ghz ptp setting for country and we now have the needed 5770 Mhz frequency available for selection. So now I am starting to wonder if this may be the reason we are getting less than anticipated results with signal levels. So now finally the real question I am asking; is there really a difference between purchasing a special frequency license from MT and using the cheat of selecting a different country in order to select 5770 Mhz? Isn't 5770 Mhz still 5770 Mhz no matter what?
Thanks, John Buwa Michiana Wireless -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
