Don't bother with the web interface. Skim through the manual and do all configuration and management from the CLI.
As for the not accepting the freq/channel...you either don't have the ODU powered up or you are trying to set a freq the ODU doesn't support. I can be available if you are still having difficulty. Best, Brad -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gino Villarini Sent: Wednesday, November 05, 2008 9:52 PM To: WISPA General List Subject: [WISPA] Trango Giga Link provisioning setup anyone can provide me with a list of basic setup for the Gigalinks? for some reason its not accpeting my rf configuration ( freq and channel size) I also just discovered i needed to turn on the odu via CLI ... Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
