Thanks, The manual I have obn hand is a pre release one, lots of info is missing... Got the latest available?
Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brad Belton Sent: Thursday, November 06, 2008 2:49 AM To: 'WISPA General List' Subject: Re: [WISPA] Trango Giga Link provisioning setup Hello Gino, You would really be doing yourself a favor to skim through the manual and then start asking more specific questions, but here's a rundown from memory on critical configuration points: (1) Enter configuration mode by typing con and enter password (2) odup on this turns on power to the ODU (3) cabl x.xx x.xx x.xx refer to manual for cable loss settings. 100' of LMR400 would be: cabl 1.48 2.25 3.90 (4) freq 19xxx this sets the TX freq for the ODU. Refer to your freq coordination (5) speed <channel_bw> <modulation> speed 3 qam16 would be used to set the radio to a 40MHz channel at QAM16. refer to freq coordination. (6) default on this sets default_opmode to "ON" (7) rat off this turns auto rate shift off. When first setting up you want this feature off. (8) odul on this turns on the ODU LED RSSI Display to aide in alignment (9) align on this turns on alignment mode which increases the refresh rate in which the RSSI is displayed. (10) target -35 this sets your target RSSI to -35 refer to your freq coordination for your expected RSSI reading (11) power 17 this sets your TX power to 17db refer to your freq coordination for your power setting Do not leave the align on after you have completed alignment. Do not leave the odul on after you have completed alignment. The cable loss settings, target RSSI and power will all have an effect on your RSSI, BER and MSE. This is something that I have been speaking with Trango about, but just takes time to learn and "feel" your way to the ideal combination. While the Giga radios are not a plug-in, point and walk away radio set they have proven to be very reliable, flexible and live up to their claims. We have deployed several Giga radios (6GHz, 11GHz and 18GHz) and have several more planned for the very near future. The price vs. feature set the Giga offers make it a hard radio to pass up. Additionally, Trango support has been good. Feel free to try me at the office if you have any questions. You probably will on your first one...<grin> Once you have it up and running you'll be very happy with the performance. Best, Brad -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gino Villarini Sent: Wednesday, November 05, 2008 10:12 PM To: WISPA General List Subject: Re: [WISPA] Trango Giga Link provisioning setup Im going to do this early am tomorrow, Could you send me a checklist of items to configure? Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brad Belton Sent: Wednesday, November 05, 2008 11:59 PM To: 'WISPA General List' Subject: Re: [WISPA] Trango Giga Link provisioning setup Don't bother with the web interface. Skim through the manual and do all configuration and management from the CLI. As for the not accepting the freq/channel...you either don't have the ODU powered up or you are trying to set a freq the ODU doesn't support. I can be available if you are still having difficulty. Best, Brad -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gino Villarini Sent: Wednesday, November 05, 2008 9:52 PM To: WISPA General List Subject: [WISPA] Trango Giga Link provisioning setup anyone can provide me with a list of basic setup for the Gigalinks? for some reason its not accpeting my rf configuration ( freq and channel size) I also just discovered i needed to turn on the odu via CLI ... Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 ------------------------------------------------------------------------ ---- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ ---- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ------------------------------------------------------------------------ -------- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ -------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ------------------------------------------------------------------------ ---- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ ---- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ------------------------------------------------------------------------ -------- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ -------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/