Travis Johnson wrote: > Hi, > > I need some Cisco switch VLAN help. > > I currently have about 60 Cisco 3500 series switches connected via the > GBIC ports all in a ring configuration with spanning tree. I am trying > to setup a VLAN for a customer between two of the FastEthernet ports so > they can connect their offices. I have port 5 on each switch setup in > VLAN105 and every GBIC port on all the switches setup as trunking ports. > There are 17 other cisco switches between these two. > > I have this setup between two other offices, but they are directly > connected to each other, with no other switches in between. > > What am I missing? > > Travis > Microserv > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > Is each trunk port in the path set to forward the VLAN with command:
switchport trunk allowed vlan xxx A sh int for an example trunk and access port would be handy. -- Patrick Shoemaker Vector Data Systems LLC [EMAIL PROTECTED] office: (301) 358-1690 x36 http://www.vectordatasystems.com -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/