Ahhh, I see you're replying on and off list. No problem for me to reply on list...I was only concerned with sharing your information on a group list.
Best, Brad -----Original Message----- From: Brad Belton [mailto:b...@belwave.com] Sent: Friday, April 03, 2009 3:33 PM To: 'WISPA General List' Subject: RE: [WISPA] Trango Giga Problem Replied off list... Best, Brad -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Gino Villarini Sent: Friday, April 03, 2009 3:30 PM To: WISPA General List Subject: Re: [WISPA] Trango Giga Problem Whats the relation of target rssi and real rssi? If I change target rssi on end 1, rssi changes on the linktest on end 1 without touching power on end 2 ...wtf? Atpc is off on both ends Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -----Original Message----- From: Brad Belton [mailto:b...@belwave.com] Sent: Friday, April 03, 2009 3:58 PM To: Gino Villarini Subject: RE: [WISPA] Trango Giga Problem If you are running 100' of LMR400 on each end then your cableloss settings are probably close enough, but I'd adjust them slightly to this: cableloss 1.5 2.3 3.9 Check now and see if your "End 1" link 10 results have improved. If not then adjust your "End 1" targetrssi from -35 to -31 and run your link 10 command again. We've never enabled ATPC, so I'm not sure if that is helping you are possibly hurting you. Let's disable it on both ends and see if we can manually get the link to settle in with better than -32db MSE and 0.00E+00 BER readings. We'll do this by adjusting your power levels, targetrssi and cableloss settings. What does your path analysis show your expected RSSI should be and at what power level? I assume this link has production traffic running across it and can't be taken offline? Brad Belton BelWave Communications O: 817-737-3124 #101 F: 817-336-7031 -----Original Message----- From: Gino Villarini [mailto:g...@aeronetpr.com] Sent: Friday, April 03, 2009 2:41 PM To: WISPA General List Cc: b...@belwave.com Subject: RE: [WISPA] Trango Giga Problem We are using lmr400 on both ends, about 100' per end Linktest 10 results End 1 (trango-view)# linktest 10 LOCK RSSI MSE BER 1> 1 -31.00 dBm -26.78 dB 7.42E-07 2> 1 -31.00 dBm -26.58 dB 0.00E+00 3> 1 -31.00 dBm -26.77 dB 0.00E+00 4> 1 -31.00 dBm -27.09 dB 0.00E+00 5> 1 -31.00 dBm -26.82 dB 0.00E+00 6> 1 -31.00 dBm -26.77 dB 7.11E-10 7> 1 -31.00 dBm -26.95 dB 0.00E+00 8> 1 -31.00 dBm -26.84 dB 0.00E+00 9> 1 -31.00 dBm -26.54 dB 0.00E+00 10> 1 -31.00 dBm -26.78 dB 7.69E-10 (trango-view)# End 2 Trango Broadband Wireless: TrangoLINK Giga Command Line Interface v2.3.8 (trango-view)# linktest 10 LOCK RSSI MSE BER 1> 1 -34.00 dBm -31.61 dB 4.09E-10 2> 1 -34.00 dBm -31.60 dB 0.00E+00 3> 1 -34.00 dBm -31.63 dB 0.00E+00 4> 1 -34.00 dBm -31.56 dB 0.00E+00 5> 1 -34.00 dBm -31.90 dB 0.00E+00 6> 1 -34.00 dBm -31.57 dB 0.00E+00 7> 1 -34.00 dBm -31.57 dB 0.00E+00 8> 1 -34.00 dBm -31.68 dB 0.00E+00 9> 1 -34.00 dBm -31.56 dB 0.00E+00 10> 1 -34.00 dBm -31.46 dB 0.00E+00 (trango-view)# Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Brad Belton Sent: Friday, April 03, 2009 3:31 PM To: 'WISPA General List' Subject: Re: [WISPA] Trango Giga Problem I know the feeling. We had one of our early Giga links working for months not realizing we had made mistakes until later. Got your configs...but also send me the link 10 results along with the type and length of cable on each end. Brad -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Gino Villarini Sent: Friday, April 03, 2009 1:55 PM To: WISPA General List Subject: Re: [WISPA] Trango Giga Problem I'll do that, Link was working for months Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Brad Belton Sent: Friday, April 03, 2009 2:47 PM To: 'WISPA General List' Subject: Re: [WISPA] Trango Giga Problem Going to need lots more info to be able to help. Cable run length and type of cable used. What is your expected RSSI per your path analysis What is your targetrssi set to What are your cableloss settings What is your power set to Run a link 10 command from both sides and provide results What version software are you running on both sides Maybe the best thing to do is run a sysinfo command on both ends and send me the results off list. Best, Brad -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Gino Villarini Sent: Friday, April 03, 2009 1:38 PM To: WISPA General List Subject: [WISPA] Trango Giga Problem I have a 2 mile 18 ghz link using Trango Giga, Im starting to drop packets, auto rate has dropped speed to qpsk, still MSE and BER is being affected sometimes on one end or both ...ATPC is on, rssi is -35 on both ends anyway to tell where the problem is? Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 ------------------------------------------------------------------------ ---- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ ---- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ------------------------------------------------------------------------ -------- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ -------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ------------------------------------------------------------------------ ---- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ ---- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ------------------------------------------------------------------------ -------- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ -------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
