Gah! An on topic thread about tactical operational aspects of a wisp!!! :)

Sent via BlackBerry from T-Mobile

-----Original Message-----
From: Matt Jenkins <m...@smarterbroadband.net>

Date: Mon, 25 May 2009 12:17:53 
To: WISPA General List<wireless@wispa.org>
Subject: Re: [WISPA] How to stabilize Pole for 30" Drum Antenna?


Gino,

I had a 3' Radiowaves dish installed (for almost a year) on top of a 
10ft 4.5" mast in a similar situation. I used the clamp linked below to 
attach it to the railing.

http://www.tessco.com/products/displayProductInfo.do?sku=482468&eventGroup=4&eventPage=1



- Matt



Gino Villarini wrote:
> Actually, check this pic... Its self explanatory... This is the only
> setup we can do on the bldg... But we are left without a perpenticular
> stabilizer... 
>
>
> Gino A. Villarini
> g...@aeronetpr.com
> Aeronet Wireless Broadband Corp.
> tel  787.273.4143   fax   787.273.4145
>
> -----Original Message-----
> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
> Behalf Of Gino Villarini
> Sent: Sunday, May 17, 2009 6:35 PM
> To: WISPA General List
> Subject: Re: [WISPA] How to stabilize Pole for 30" Drum Antenna?
>
> Well imagine that we have a big wall...were we would install a wall
> mount base and the 4"pipe, the Pipe would potrude from the wall and the
> antenna would be installed in the upper part of the pipe above from the
> wall ... Point is we could install stabilizing  arms to the pipe and the
> wall... They would be parallel to the wall ... But we don't ahave any
> other surface to intall a stabilizer in a perpenticular way to tha wall 
>
> Clear? No?
>
>
> Gino A. Villarini
> g...@aeronetpr.com
> Aeronet Wireless Broadband Corp.
> tel  787.273.4143   fax   787.273.4145
>
> -----Original Message-----
> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
> Behalf Of Jack Unger
> Sent: Sunday, May 17, 2009 6:29 PM
> To: WISPA General List
> Subject: Re: [WISPA] How to stabilize Pole for 30" Drum Antenna?
>
> Gino,
>
> Can you clarify what you mean by "parallel" and "perpendicular" 
> (relative to what)?
>
> jack
>
>
> Gino Villarini wrote:
>   
>> we are goint to mount a 30" 11 Ghz Drum in a bldg rooftop, we are 
>> goint to use a 4" Mast, any ideas on how to stabilize it?
>>  
>> We have parallel atachment points but none perpenticular... any ideas 
>> on this?
>>  
>>
>> Gino A. Villarini
>> g...@aeronetpr.com
>> Aeronet Wireless Broadband Corp. 
>> tel  787.273.4143   fax   787.273.4145 
>>
>>   
>>     
>>
>> ------------------------------------------------------------------------
>>
>> ------------------------------------------------------------------------
>>
>>
>>
>> --------------------------------------------------------------------------------
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>> --------------------------------------------------------------------------------
>>  
>> WISPA Wireless List: wireless@wispa.org
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to