Do you have any ethreal data you can share? ryan
Steve Smith wrote: > In our case we are using staros APs. We like to have the CPE set to > router mode so we don't have to deal with any of the client equipment > on their side of our unit at their place. That way we don't care if > they change out a piece of equipment. > > We are having no problem with any Tranzeo equipment that is set to > bridge mode. We love the Tranzeo CPQs. Our problems are when the > CPQs are in router mode. There is a definite problem that we can > replicate 100% of the time. > > We have eliminated all of the causes of the problem with the exception > of the Tranzeo CPQ. > > All units have 4.0.2 and we do not believe the problem is with an > upgrade in the firmware because we can replicate the problem in > version 3.6.7 as well. > > I just moved one client today that was in router mode back to bridge > mode because they couldn't do their UPS shipping until we did. > Apparently, we may need to move all of them to bridge mode but with > hundreds of units out there I really don't like that idea. > > steve > > > > D. Ryan Spott wrote: >> Why you would route AT the AP boggles my mind... Routing Before the AP >> is the way to go. >> >> Why add additional load on an AP when it should be working on sending >> and receiving wireless data. >> >> ryan >> >> Rick Kunze wrote: >> >>> I've got about 50 or 60 CPQ's and SL2's out there, as well as a dozen or >>> so 6000's, some for up to 4 or 5 years. >>> >>> I've never had a single problem with any of them failing to pass traffic >>> as mentioned in the thread. I just upgraded one small town to 4.0.2, a >>> couple 6000's and a couple dozen CPE's in router/NAT mode. No calls >>> from any customers . . . everything seems normal. >>> >>> IMO, the Tranzeo stuff has been fine. All AP's however are bridged in >>> my case. >>> >>> Rk >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> > -- > Steve Smith, Chase 3000, PO Box 760, 554 Kramer St., Imperial, NE > 69033, 308 882 3000 office, 308 883 3001 cell > ------------------------------------------------------------------------ > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/