I do. I will drop it to you offlist.
D. Ryan Spott wrote:
Do you have any ethreal data you can share?
ryan
Steve Smith wrote:
In our case we are using staros APs. We like to have the CPE set to
router mode so we don't have to deal with any of the client equipment
on their side of our unit at their place. That way we don't care if
they change out a piece of equipment.
We are having no problem with any Tranzeo equipment that is set to
bridge mode. We love the Tranzeo CPQs. Our problems are when the
CPQs are in router mode. There is a definite problem that we can
replicate 100% of the time.
We have eliminated all of the causes of the problem with the exception
of the Tranzeo CPQ.
All units have 4.0.2 and we do not believe the problem is with an
upgrade in the firmware because we can replicate the problem in
version 3.6.7 as well.
I just moved one client today that was in router mode back to bridge
mode because they couldn't do their UPS shipping until we did.
Apparently, we may need to move all of them to bridge mode but with
hundreds of units out there I really don't like that idea.
steve
D. Ryan Spott wrote:
Why you would route AT the AP boggles my mind... Routing Before the AP
is the way to go.
Why add additional load on an AP when it should be working on sending
and receiving wireless data.
ryan
Rick Kunze wrote:
I've got about 50 or 60 CPQ's and SL2's out there, as well as a dozen or
so 6000's, some for up to 4 or 5 years.
I've never had a single problem with any of them failing to pass traffic
as mentioned in the thread. I just upgraded one small town to 4.0.2, a
couple 6000's and a couple dozen CPE's in router/NAT mode. No calls
from any customers . . . everything seems normal.
IMO, the Tranzeo stuff has been fine. All AP's however are bridged in
my case.
Rk
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
Steve Smith, Chase 3000, PO Box 760, 554 Kramer St., Imperial, NE
69033, 308 882 3000 office, 308 883 3001 cell
------------------------------------------------------------------------
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
Steve Smith,
Chase 3000,
PO Box 760,
554 Kramer St.,
Imperial, NE 69033,
308 882 3000 office,
308 883 3001 cell
|
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
