Even on the same hardware I see more screw ups with the binary backup then what I want to see. Going from the exact same model to a replaced board with the binary backup should be flawless, still, it isn't.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 "When you have eliminated the impossible, that which remains, however improbable, must be the truth." --- Sir Arthur Conan Doyle On Tue, Jun 23, 2009 at 1:29 PM, David E. Smith <d...@mvn.net> wrote: > Scott Reed wrote: > > RouterOS restore from backup (not export) works to the same model > hardware. > > I'll admit I haven't tried it recently, but it used to be really iffy - > since a "new" system would have a different radio card, and different > MACs on the Ethernet interfaces, it always was a horribly error-prone > process in my experience. > > I'll have to grab a spare off the shelf and try this again later. > Thanks! :) > > David Smith > MVN.net > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
