I was debating whether or not it was an early/or late April first product introduction. No way I'd use one of those ugly things!
-----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Randy Cosby Sent: Thursday, August 27, 2009 4:28 PM To: WISPA General List Subject: Re: [WISPA] Antenna Mount extensions Another example of overkill, but you'll never have to go back and fix it... except when the neighbors complain how ugly it is :) Up to 2" mast! ralph wrote: > This is a weird looking animal! A chimney mount for a dish with 5 straps. > http://www.ronard.com/4424.html > > > -----Original Message----- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Randy Cosby > Sent: Thursday, August 27, 2009 12:51 PM > To: WISPA General List > Subject: Re: [WISPA] Antenna Mount extensions > > http://www.ronard.com/730731.html > > A bit more expensive / sturdy / configurable... > > Probably overkill. > > Ronard makes really good stuff. > > > Robert West wrote: > >> [IMG]http://i28.tinypic.com/fnsxl.jpg[/IMG] >> >> Another crude rendering. >> >> The bottom is where he mounts the pipe to the side of the house. Then it >> goes up and the bend allows it to go out and up over the eave and then >> > back > >> into over the roof. If the bend is too far out, they swing the assembly >> > in > >> towards the eave and mount to that as well. >> >> He said he has the muffler shop bend it just like regular muffler pipe, >> > the > >> alloy is similar as in it's pretty soft and easy to bend. So it does a 90 >> degree, then up and a 90 degree back and up again. Looked darned simple >> > and > >> he buys the EMT for 13 bucks and pays the muffler guy something like 20 >> bucks to do 10 or 20 of them. >> >> >> >> -----Original Message----- >> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >> Behalf Of Josh Luthman >> Sent: Thursday, August 27, 2009 12:06 PM >> To: WISPA General List >> Subject: Re: [WISPA] Antenna Mount extensions >> >> I think the bottom horizontal line is the base of the standard powmount - >> but the top horizontal line is where I am confused. You said the muffler >> shop bends it, does it make a shift like a traditional muffler? 90 turn? >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> "When you have eliminated the impossible, that which remains, however >> improbable, must be the truth." >> --- Sir Arthur Conan Doyle >> >> >> On Thu, Aug 27, 2009 at 12:03 PM, Robert West >> <robert.w...@just-micro.com>wrote: >> >> >> >>> No, it's like this crude ASCII rendering. >>> He puts a U clamp on the bottom and on the eave. >>> >>> I >>> I >>> I >>> I >>> I >>> I >>> I >>> ------I >>> I >>> I >>> I >>> ------- >>> I >>> I >>> I >>> I >>> >>> -----Original Message----- >>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >>> Behalf Of Josh Luthman >>> Sent: Thursday, August 27, 2009 11:38 AM >>> To: WISPA General List >>> Subject: Re: [WISPA] Antenna Mount extensions >>> >>> Robert, >>> >>> Your competitor's U shaped EMT - does it look like my painting? >>> >>> http://i27.tinypic.com/30woz1k.jpg >>> >>> Note - IANAA (I am not an artist) >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> "When you have eliminated the impossible, that which remains, however >>> improbable, must be the truth." >>> --- Sir Arthur Conan Doyle >>> >>> >>> On Thu, Aug 27, 2009 at 11:27 AM, Robert West >>> <robert.w...@just-micro.com>wrote: >>> >>> >>> >>>> My competitor here uses 1.25" EMT conduit from Home Depot, 13 bucks for >>>> >>>> >> a >> >> >>>> 10' section. He takes them to the local muffler shop and has them bend >>>> them >>>> with a block U shape so that he can mount them to the side of the house >>>> under the peak and the bend allows him to swing the mount to the eave as >>>> well for stability. For additional height he inserts the next smaller >>>> >>>> >>> size >>> >>> >>>> of EMT 1 to 2 feet inside the 1.25" and puts a couple of 1/4" bolts to >>>> attach them together. He can add another 8 or 9 feet this way. BUT, >>>> >>>> >> EMT >> >> >>>> is >>>> a soft allow, it's made to bend easily so I certainly wouldn't want to >>>> trust >>>> it with anything with a large wind load very high up. >>>> >>>> I haven't tried it but he says it works perfect for him and his guys >>>> install >>>> a lot faster now. >>>> >>>> Bob- >>>> >>>> -----Original Message----- >>>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >>>> Behalf Of Michael Baird >>>> Sent: Thursday, August 27, 2009 10:49 AM >>>> To: WISPA General List >>>> Subject: [WISPA] Antenna Mount extensions >>>> >>>> As we get into more and more installs, we are discovering installations >>>> where we just need a little more height, 5-10 ft. or so. Currently the >>>> majority of our installs are roof mount via a dish type screw in mount, >>>> or antenna tower mount. I'm looking for suggestions on additional >>>> mounting options, specifically we would like to be able to extend off >>>> the roof another 5-20ft if possible with some sort of simple/economical >>>> extension that will remain stable into the future. >>>> >>>> Regards >>>> Michael Baird >>>> >>>> >>>> >>>> >>>> >>>> >>> >>> > ---------------------------------------------------------------------------- > >> >> >>>> ---- >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> >>>> >>>> >>>> >>> >>> > ---------------------------------------------------------------------------- > >> >> >>>> ---- >>>> >>>> WISPA Wireless List: wireless@wispa.org >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>> >>> > ---------------------------------------------------------------------------- > >> >> >>> ---- >>> >>> >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> >>>> >>>> >>>> >>> >>> > ---------------------------------------------------------------------------- > >> >> >>> ---- >>> >>> >>>> WISPA Wireless List: wireless@wispa.org >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>>> >>>> >>> >>> > ---------------------------------------------------------------------------- > >> >> >>> ---- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> >>> >>> >>> > ---------------------------------------------------------------------------- > >> >> >>> ---- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> >>> >>> >>> >>> > ---------------------------------------------------------------------------- > >> ---- >> >> >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> >>> >>> >>> > ---------------------------------------------------------------------------- > >> ---- >> >> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> >> >> > ---------------------------------------------------------------------------- > >> ---- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> > ---------------------------------------------------------------------------- > >> ---- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> >> > ---------------------------------------------------------------------------- > ---- > >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> > ---------------------------------------------------------------------------- > ---- > >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> > > > ---------------------------------------------------------------------------- > ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ---------------------------------------------------------------------------- > ---- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > ---------------------------------------------------------------------------- ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ---------------------------------------------------------------------------- ---- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/