Just change the nat to use the other public ip since your already masquerading just change that rule to src-nat and set the public ip to src-nat to.
/Eje ------Original Message------ From: Data Technology Sender: wireless-boun...@wispa.org To: WISPA General List ReplyTo: WISPA General List Subject: [WISPA] suggestions for dual wan dhcp auto fail over Sent: Dec 1, 2009 15:30 I am trying to configure an rb450 v4.3 to connect to 2 different providers with dhcp using 1 as the primary and the other as a backup. I would like it to switch over to the backup if the primary service is down. I want to nat local users to either service. I assume I will need to use netwatch to check the servcie availability so I can check all the way thru the providers service and not just the local physical connection. The question is what do I need to do when the primary goes down? I thought I could just change the distance on the route but I found out it will not let you change the distance if the default route is set by the dhcp-client. I have looked at some of the examples on the wiki but they all use static ip address and I am wanting to use dhcp. Anyone have any pointers? Thanks LaRoy McCann Data Technology -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ Sent via BlackBerry from T-Mobile -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/