Yes the dsl modem is handing out a dhcp address. I figure I will have to ping way back upstream to check the connection vs just pinging the dhcp modem. I was thinking that if I just change the distance value to a higher value then I could leave the interface up and nat should use the route with the lowest distance value. (not tested yet) Then I could ping with a source address of the dsl interface and it should go out the dsl line even though the distance is set higher than the backup. (not tested yet)
Dennis Burgess wrote: > There are other things to also keep in mind when dealing with DHCP, i.e. > is your DHCP being handed out locally. sSo if you have a DSL line is > the DSL modem handing this out? if so, then watching that connection is > useless, you will have to do some policy based routing and checks to > verify that it is up and bring it down if it is not up. > > ----------------------------------------------------------- > Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer > WISPA Board Member - wispa.org > Link Technologies, Inc -- Mikrotik & WISP Support Services > WISPA Vendor Member > Office: 314-735-0270 Website: http://www.linktechs.net > LIVE On-Line Mikrotik Training > Author of "Learn RouterOS" > > > -----Original Message----- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Josh Luthman > Sent: Tuesday, December 01, 2009 4:21 PM > To: WISPA General List > Subject: Re: [WISPA] suggestions for dual wan dhcp auto fail over > > Lucky you, glad you could have 3.x everywhere! > > I could be wrong as it may just be my experience, but the command line > for > custom things is necessary as the GUI doesn't show everything. I > started > with GUI and moved a lot to CLI as it seems easier/faster. Hopefully > it's > simply a personal preference! > > There are places like wireless where the GUI is almost required as the > CLI > is difficult to navigate and may not even have some values. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > "The secret to creativity is knowing how to hide your sources." > --- Albert Einstein > > > On Tue, Dec 1, 2009 at 5:17 PM, Data Technology <w...@dtisp.com> wrote: > > >> Yeah, when I looked at the article you listed it clicked. I don't use >> the command line except when I have to so I was a little off on the >> command to change the distance setting. >> >> I have version 4.3 so that should not be a problem. >> I've been using MT for several years but I have gotten past the 2.9.x. >> I think oldest is 3.25. >> >> >> Josh Luthman wrote: >> >>> First one is definitely not going to work. >>> >>> Second one is what you need =) >>> >>> Do keep in mind you need 3.11+. If you're new to Mikrotik there is >>> >> little >> >>> reason to be concerned, but some users such as myself still have >>> > 2.9.50 > >> or >> >>> 51 stuff! >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> "The secret to creativity is knowing how to hide your sources." >>> --- Albert Einstein >>> >>> >>> On Tue, Dec 1, 2009 at 4:29 PM, Data Technology <w...@dtisp.com> >>> > wrote: > >>> >>>> Josh, >>>> That is what I was trying to do but I was trying to use "/ip route >>>> > set > >>>> ether1 distance=3" instead of "/ip dhcp-client set ether1 >>>> default-route-distance=3". >>>> >>>> Thanks >>>> LaRoy >>>> >>>> >>>> Josh Luthman wrote: >>>> >>>> >>>>> This might help you >>>>> http://stfunoo.be/?p=268 >>>>> >>>>> I like using route distance since 3.11 DHCP can do it. >>>>> >>>>> It has worked very well for me. >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 >>>>> Direct: 937-552-2343 >>>>> 1100 Wayne St >>>>> Suite 1337 >>>>> Troy, OH 45373 >>>>> >>>>> "The secret to creativity is knowing how to hide your sources." >>>>> --- Albert Einstein >>>>> >>>>> >>>>> On Tue, Dec 1, 2009 at 4:01 PM, Data Technology <w...@dtisp.com> >>>>> >> wrote: >> >>>>> >>>>> >>>>>> Sounds too easy :) I'll give it a try. >>>>>> >>>>>> Thanks >>>>>> LaRoy >>>>>> >>>>>> e...@wisp-router.com wrote: >>>>>> >>>>>> >>>>>> >>>>>>> Just change the nat to use the other public ip since your >>>>>>> > already > >>>>>>> >>>>>> masquerading just change that rule to src-nat and set the public >>>>>> > ip to > >>>>>> src-nat to. >>>>>> >>>>>> >>>>>> >>>>>>> /Eje >>>>>>> ------Original Message------ >>>>>>> From: Data Technology >>>>>>> Sender: wireless-boun...@wispa.org >>>>>>> To: WISPA General List >>>>>>> ReplyTo: WISPA General List >>>>>>> Subject: [WISPA] suggestions for dual wan dhcp auto fail over >>>>>>> Sent: Dec 1, 2009 15:30 >>>>>>> >>>>>>> I am trying to configure an rb450 v4.3 to connect to 2 different >>>>>>> providers with dhcp using 1 as the primary and the other as a >>>>>>> > backup. > >>>>>>> I would like it to switch over to the backup if the primary >>>>>>> > service > >> is >> >>>>>>> >>>>>> down. >>>>>> >>>>>> >>>>>> >>>>>>> I want to nat local users to either service. >>>>>>> >>>>>>> I assume I will need to use netwatch to check the servcie >>>>>>> >> availability >> >>>>>>> so I can check all the way thru the providers service and not >>>>>>> > just > >> the >> >>>>>>> local physical connection. >>>>>>> >>>>>>> The question is what do I need to do when the primary goes down? >>>>>>> I thought I could just change the distance on the route but I >>>>>>> > found > >> out >> >>>>>>> it will not let you change the distance if the default route is >>>>>>> > set > >> by >> >>>>>>> the dhcp-client. >>>>>>> >>>>>>> I have looked at some of the examples on the wiki but they all >>>>>>> > use > >>>>>>> static ip address and I am wanting to use dhcp. >>>>>>> Anyone have any pointers? >>>>>>> >>>>>>> Thanks >>>>>>> >>>>>>> LaRoy McCann >>>>>>> Data Technology >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> > ------------------------------------------------------------------------ > -------- > >>>>>>> WISPA Wants You! Join today! >>>>>>> http://signup.wispa.org/ >>>>>>> >>>>>>> >>>>>>> >>>>>>> > ------------------------------------------------------------------------ > -------- > >>>>>>> WISPA Wireless List: wireless@wispa.org >>>>>>> >>>>>>> Subscribe/Unsubscribe: >>>>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>>>> >>>>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>>>> >>>>>>> >>>>>>> Sent via BlackBerry from T-Mobile >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> > ------------------------------------------------------------------------ > -------- > >>>>>>> WISPA Wants You! Join today! >>>>>>> http://signup.wispa.org/ >>>>>>> >>>>>>> >>>>>>> >>>>>>> > ------------------------------------------------------------------------ > -------- > >>>>>>> WISPA Wireless List: wireless@wispa.org >>>>>>> >>>>>>> Subscribe/Unsubscribe: >>>>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>>>> >>>>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>>>> >>>>>>> ---------- >>>>>>> >>>>>>> This message has been scanned for viruses and >>>>>>> dangerous content by the Data Technology >>>>>>> MailScanner, and is believed to be clean. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> > ------------------------------------------------------------------------ > -------- > >>>>>> WISPA Wants You! Join today! >>>>>> http://signup.wispa.org/ >>>>>> >>>>>> >>>>>> >>>>>> > ------------------------------------------------------------------------ > -------- > >>>>>> WISPA Wireless List: wireless@wispa.org >>>>>> >>>>>> Subscribe/Unsubscribe: >>>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>>> >>>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>>> >>>>>> >>>>>> >>>>>> >>>>> > ------------------------------------------------------------------------ > -------- > >>>>> WISPA Wants You! Join today! >>>>> http://signup.wispa.org/ >>>>> >>>>> >>>>> > ------------------------------------------------------------------------ > -------- > >>>>> WISPA Wireless List: wireless@wispa.org >>>>> >>>>> Subscribe/Unsubscribe: >>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>> >>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>> >>>>> ---------- >>>>> >>>>> This message has been scanned for viruses and >>>>> dangerous content by the Data Technology >>>>> MailScanner, and is believed to be clean. >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>> > ------------------------------------------------------------------------ > -------- > >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> >>>> >>>> > ------------------------------------------------------------------------ > -------- > >>>> WISPA Wireless List: wireless@wispa.org >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>>> >>>> >>> >>> > ------------------------------------------------------------------------ > -------- > >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> >>> > ------------------------------------------------------------------------ > -------- > >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> ---------- >>> >>> This message has been scanned for viruses and >>> dangerous content by the Data Technology >>> MailScanner, and is believed to be clean. >>> >>> >>> >>> >> >> >> >> > ------------------------------------------------------------------------ > -------- > >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> >> > ------------------------------------------------------------------------ > -------- > >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> > > > ------------------------------------------------------------------------ > -------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ------------------------------------------------------------------------ > -------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > ---------- > > This message has been scanned for viruses and > dangerous content by the Data Technology > MailScanner, and is believed to be clean. > > > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/