I have a few like that. Cheap and quick for low density population. Use a pac grid for the backhaul and a bullet with an omni for the AP. Check your polarity, make sure you're on the right orientation and right radio. My grids are horz. Pol and the omnis, well..... Vertical of course!
Bob- -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of RickG Sent: Monday, February 01, 2010 8:08 PM To: WISPA General List Subject: [WISPA] power OK, I need a little input. I've got several "poor mans repeaters" around by using a pair of bullets, one for backhaul and the other for the AP. Today, I installed a Bullet on a new customer that was a stones throw away from the AP. At full power, he got just under 1Mbps. Turning down the power, he got 3Mbps+. Is turning down the power on the CPE side on a test and trial basis or is there some kind of method to it? -RickG ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
