I have one where I'm hitting it at 12 miles with a -77 but the noise floor hovers at around a -87 most of the time. But that's using a 23dbi cpe. Haven't tried the UBNT 27dbi there, may make it all good.
Would 90's be a better choice? I have only one AP using the smaller UBNT 90's but haven't tried the large 90's, only the 120's. Bob- -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mike Hammett Sent: Monday, March 29, 2010 3:54 PM To: WISPA General List Subject: Re: [WISPA] Ubiquiti Sector Tilt angle I wouldn't even try to get a signal 15 miles away on a 120. :-p ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -------------------------------------------------- From: "Robert West" <robert.w...@just-micro.com> Sent: Monday, March 29, 2010 1:29 PM To: "'WISPA General List'" <wireless@wispa.org> Subject: Re: [WISPA] Ubiquiti Sector Tilt angle > I was compensating for the electrical tilt but just one degree was > throwing > it way, way off. Trying to get a usable signal 15 miles out, maybe less, > and that slightest fraction of a degree would change it considerably. But > after reading Tom and Mercy's posts it's all making sense to me........... > A little more work. > > Bob- > > > -----Original Message----- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Faisal Imtiaz > Sent: Monday, March 29, 2010 2:22 PM > To: WISPA General List > Subject: Re: [WISPA] Ubiquiti Sector Tilt angle > > ..... Technically speaking.. if you are not concerned about dealing with > 'near' customers.... less than 1 or 2 miles... then you can pretty much > leave the sectors at '0' tilt.. and you have coverage to the horizon.... > > The built-in electrical down-tilt typically throws folks off...... only > becomes a factor if you are needing to down tilt for near customers.. > > Faisal. > > On 3/29/2010 1:36 PM, Robert West wrote: >> I'm having a heck of a time with the large UBNT sectors getting the tilt >> angle to jive. With the smaller sectors, they behave perfectly and go > right >> where the calculations say they will however, with the larger ones, > nothing >> I do other than have someone 10 miles out with a CPE check levels while I >> tilt up and down seems to be good. I REALLY don't want to have to do >> that >> with all of them... >> >> >> >> Anyone having any success or insight with the proper tilt of these >> things? >> Using the 120 degree 5GHz flavors. >> >> >> >> Thanks! >> >> >> >> Robert West >> >> Just Micro Digital Services Inc. >> >> 740-335-7020 >> >> >> >> Logo5 >> >> >> >> >> >> >> >> >> >> > ---------------------------------------------------------------------------- > ---- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> > ---------------------------------------------------------------------------- > ---- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ > > > ---------------------------------------------------------------------------- > ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ---------------------------------------------------------------------------- > ---- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > ---------------------------------------------------------------------------- ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ---------------------------------------------------------------------------- ---- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/