Is there a reason you are using Pseudobridge? You will not be able to pass any MAC addresses behind the Station (CPE/Slave), it MAC NATs. Change to WDS instead and see if your problems go away. It is better to have a layer 2 bridge and deal with the broadcasts at each site.
Eric Rogers Precision Data Solutions, LLC (317) 831-3000 x200 -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Forbes Mercy Sent: Wednesday, March 31, 2010 1:46 PM To: WISPA General List Subject: Re: [WISPA] Does anybody have any ideas? Thanks for the interest in helping here is the info: Site A RB532A board AR5212 chip v3.30 OS Running as an AP Bridge Running WDS and Nstreme Site B to Site A RB133 board A5413 chip v3.30 OS Running as Station WDS Running WDS and Nstreme Site B to Site C RB532A board AR5413 chip v3.30 OS Running as an AP Bridge Running Nstreme (not WDS) Site C RB532A AR5413 chip v3.30 OS Running as station pseudobridge Running Nstreme (not WDS) ------------------------------------------------------------------------ -------- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ -------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/