All sites have good, clean power? Do the logs say anything before you reboot?
Dirty power causes a ton of weird issues. If you have something that regulates the power you can rule that out. It could be maybe a motor or something kicks on and causes enough voltage drop to lockup the board. If would turn on graphing on the Tiks themselves. Have it write to disk so it survives a reboot. See if the CPU spikes, bandwidth spikes, or whatever. Logging to disk is also a good idea. -- Justin Wilson <j...@mtin.net> http://www.mtin.net http://www.metrospan.net From: Forbes Mercy <forbes.me...@wabroadband.com> Reply-To: WISPA General List <wireless@wispa.org> Date: Wed, 31 Mar 2010 10:46:11 -0700 To: WISPA General List <wireless@wispa.org> Subject: Re: [WISPA] Does anybody have any ideas? Thanks for the interest in helping here is the info: Site A RB532A board AR5212 chip v3.30 OS Running as an AP Bridge Running WDS and Nstreme Site B to Site A RB133 board A5413 chip v3.30 OS Running as Station WDS Running WDS and Nstreme Site B to Site C RB532A board AR5413 chip v3.30 OS Running as an AP Bridge Running Nstreme (not WDS) Site C RB532A AR5413 chip v3.30 OS Running as station pseudobridge Running Nstreme (not WDS) ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/