Seems reliable enough to me, have not had a problem with one yet.

Kurt Fankhauser
WAVELINC
P.O. Box 126
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com
 
 

-----Original Message-----
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Patrick Cole
Sent: Thursday, April 08, 2010 9:05 AM
To: WISPA General List
Subject: Re: [WISPA] UBNT PowerBridgeM5

Kurt,

Are they reliable?   They seem to be much lower cost compared to 
what we've used previously (Snaptec).

Pat

Thu, Apr 08, 2010 at 08:54:03AM -0400, Kurt Fankhauser wrote:


> This should fix your 12v site problem.
> 
> http://www.zahninc.com/
> 
> 
> Kurt Fankhauser
> WAVELINC
> P.O. Box 126
> Bucyrus, OH 44820
> 419-562-6405
> www.wavelinc.com
>  
>  
> -----Original Message-----
> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
> Behalf Of Patrick Cole
> Sent: Wednesday, April 07, 2010 12:31 PM
> To: WISPA General List
> Subject: Re: [WISPA] UBNT PowerBridgeM5
> 
> Phil,
> 
> The units we had would not boot unless they were powered using 48V.
> This also caused us some dramas since our sites had 12V supplies
> predominantly.   The spec sheet of the radio lists a wide input
> voltage but acording to support our hardware required the 48.
> 
> The radios were definitely branded Mikrotik from my memory.
> 
> Pat
> 
> Wed, Apr 07, 2010 at 09:37:55AM -0500, Philip Dorr wrote:
> 
> 
> > Actually it is a Ubiquti radio and the power supply does not need to
> > be 48 volts, 9-48 works fine for the Gateworks board (Avila GW2348-2).
> >  We had moisture get in the ethernet jack and burn the pins when it
> > was using 48 volts, so we switched to a Ubiquti 15 volt adapter and
> > have not had any problems yet.
> > 
> > On Wed, Apr 7, 2010 at 9:07 AM, Patrick Cole <z...@amused.net> wrote:
> > > I would steer well clear of that UBNT bridge for something as critical
> > > as you describe.  At the price point it just screams disaster.
> > >
> > > I've not used the Ligowave MIMO radios however I have used the LigoPTP
> 5-N
> > > and I was a little disappointed.  The lack of QoS is a definite
> negative.
> > >
> > > We had one of the endpoints on the link burn out and die within 2
> months.
> > >
> > > I also had major problems with the encryption on them, which support
> > > never seemed to be able to resolve.    When they try to link up,
> > > it could take like a minute and other times it might take 20 minutes
> > > before the link establishes with encryption on.  Unacceptable in
> > > a carrier network.
> > >
> > > They do however perform at the advertised 70Mbps real world throughput
> > > in a 40MHz channel and the PPS performance is good.
> > >
> > > If you crack open the 5-N you actually see it has a Mikrotik badged
> > > radio in it.
> > >
> > > I have a pair of Proxim Tsunami QB-8100 bridges on the way for
> > > testing.  I didn't get much feedback from the list about how these
> > > go, but having looked through the manual, they seem extremely
> > > configurable and excellent QoS features; they even have the ability
> > > to inspect the contents of PPPoE frames and match on the IP packet
> > > inside.   I will let you know how they turn out.
> > >
> > > Pat
> > >
> > > Wed, Apr 07, 2010 at 09:45:23AM -0400, Steve Barnes wrote:
> > >
> > >
> > >> OK I just got off the phone with a salesman that was discouraging me
> away from UBNT rockets for this link. I will be running 4 towers through
> this link with 270 clients.  His concern was that they had learned of a
> 20,000 packet per sec limit compared to Ligowave @ 75,000 packets.  Now I
am
> looking at going to VOIP and the Packet count is going to be huge.  Is
this
> a legit concern. How can you find Rocket Packet ability.
> > >>
> > >> Steve Barnes
> > >> RC-WiFi Wireless Internet Service
> > >>
> > >>
> > >>
> > >>
>
----------------------------------------------------------------------------
> ----
> > >> WISPA Wants You! Join today!
> > >> http://signup.wispa.org/
> > >>
>
----------------------------------------------------------------------------
> ----
> > >>
> > >> WISPA Wireless List: wireless@wispa.org
> > >>
> > >> Subscribe/Unsubscribe:
> > >> http://lists.wispa.org/mailman/listinfo/wireless
> > >>
> > >> Archives: http://lists.wispa.org/pipermail/wireless/
> > >>
> > >
> > >
> > >
>
----------------------------------------------------------------------------
> ----
> > > WISPA Wants You! Join today!
> > > http://signup.wispa.org/
> > >
>
----------------------------------------------------------------------------
> ----
> > >
> > > WISPA Wireless List: wireless@wispa.org
> > >
> > > Subscribe/Unsubscribe:
> > > http://lists.wispa.org/mailman/listinfo/wireless
> > >
> > > Archives: http://lists.wispa.org/pipermail/wireless/
> > >
> > 
> > 
> >
>
----------------------------------------------------------------------------
> ----
> > WISPA Wants You! Join today!
> > http://signup.wispa.org/
> >
>
----------------------------------------------------------------------------
> ----
> >  
> > WISPA Wireless List: wireless@wispa.org
> > 
> > Subscribe/Unsubscribe:
> > http://lists.wispa.org/mailman/listinfo/wireless
> > 
> > Archives: http://lists.wispa.org/pipermail/wireless/
> 
> 
>
----------------------------------------------------------------------------
> ----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
----------------------------------------------------------------------------
> ----
>  
> WISPA Wireless List: wireless@wispa.org
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/
> 
> 
> 
>
----------------------------------------------------------------------------
----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
----------------------------------------------------------------------------
----
>  
> WISPA Wireless List: wireless@wispa.org
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/
> 


----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to